Airmar B75H Bronze Chirp Thru Hull 0° Tilt - 600W - Requires Mix and Match Cable

The right transducer enhances the performance of any echosounder, no matter what the power level or price. From small jet-ski sensors to large steel-tank transducers, Airmar's depth, speed, and temperature sensors are the most responsive in the market. Airmar prides themself on the little extras that are added to products that make a big difference in performance and customer satisfaction.

600 W

Airmar's low-profile, Chirp-ready, transducers are the perfect addition to smaller boats such as center consoles. The high-frequency band of the B75H, operating between 130 and 210 kHz, has a narrow beamwidth—excellent for pinpointing fish holding tight to wrecks, reefs, and other structures. It also shows amazing target separation on baitfish and schooling gamefish. This transducer delivers up to 80 kHz of total bandwidth in just one installation for clear bottom detail and fish target resolution.

Tilted Element transducers have the ceramic element fixed at a 20°, 12°, or 0° angle within the housing. When the transducer is installed almost flush to the hull, the tilt of the element corrects for the hull deadrise, orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings.

The B75H is available in three Tilted Element models:

• Fixed 20° tilted version for 16 to 24° hull deadrise angles
• Fixed 12° tilted version for 6 to 15° hull deadrise angles
• Fixed 0° tilted version for 0 to 7° hull deadrise angles

• Tilt at 0 degrees for installation in tight spaces
• Requires mix and match cable for installation
• Rely on airmar's broadband transducers for your ultimate fishing mission.

• 600W output power
• B75H Bronze Chirp Thru Hull 0° Tilt
• Requires Mix and Match Cable
• Rely on Airmar's broadband transducers for your ultimate fishing mission.

If you want to catch more fish, buy the Airmar B75H Bronze Chirp. It's the best-selling transducer in the world for a reason. This transducer is perfect for fishing in shallow water and has a depth and fast-response water-temperature sensor. It covers popular fishing frequencies of 200 kHz and has a total bandwidth of 80 kHz from one transducer.

12-Pin Chirp

• Tilt at 0 degrees for installation in tight spaces
• Requires mix and match cable for installation
• Rely on airmar's broadband transducers for your ultimate fishing mission.
• 600W output power
• B75H Bronze Chirp Thru Hull 0° Tilt
• Requires Mix and Match Cable
• Rely on Airmar's broadband transducers for your ultimate fishing mission.
• Airmar B75C 0& 176; tlted element High CHIRP Bronze Thru Hull with Mix-N-Match Plug Model: B75C-0-H-MM
• Depth & fast-response water-temperature sensor 80 kHz of total bandwidth from one transducer Covers popular fishing frequency of 200 kHz plus
• Full-spectrum water temperature reading from one transducer
• Water temperature sensor reads up to 80 kHz of total bandwidth
• Covers popular fishing frequency of 200 kHz plus

600 W

Depth, Temperature

USA

High

8 (w) X 5 (h) X 12 (l) inches and the weight is: 5.88 lb.

MMC

Tilted Element Thru-Hull

CHIRP-Ready Single-Band

0°

Airmar 12-Pin (MMC)

9 m (30')

Cable Required

Fishing

Bronze

High

214 m (700')

0° to 7°

70 mm (2-13/16")

130-210 kHz

15°-9°

Yes

Fiberglass or wood

95 mm (3.75")

Up to 24°

24°

600 W

Airmar's low-profile, Chirp-ready, transducers are the perfect addition to smaller boats such as center consoles. The high-frequency band of the B75H, operating between 130 and 210 kHz, has a narrow beamwidth—excellent for pinpointing fish holding tight to wrecks, reefs, and other structures. It also shows amazing target separation on baitfish and schooling gamefish. This transducer delivers up to 80 kHz of total bandwidth in just one installation for clear bottom detail and fish target resolution.

Tilted Element transducers have the ceramic element fixed at a 20°, 12°, or 0° angle within the housing. When the transducer is installed almost flush to the hull, the tilt of the element corrects for the hull deadrise, orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings.

The B75H is available in three Tilted Element models:

• Fixed 20° tilted version for 16 to 24° hull deadrise angles
• Fixed 12° tilted version for 6 to 15° hull deadrise angles
• Fixed 0° tilted version for 0 to 7° hull deadrise angles