OUT OF STOCK
Lee's Center Rigger Holder - Inner Diameter 1-5/8"
SKU: 31082 - UPC: 096811800120 - MPN: MX8000CR
$503.99
$658.75
( / )
MX8000CRAdjustable Angle holders MX8000CR (1-5/8" ID) are our strongest and most versatile holders. The three-point mounting distributes the stress and provides side support. This heavy duty unit allows you to set your outrigger angle for maximum efficiency. The angle is set by positioning the clamp on the main tube during...
Same Day
Shipping (3PM)
Free Returns
Within 30 days
Lee's Center Rigger Holder - Inner Diameter 1-5/8" Product Description
MX8000CRAdjustable Angle holders MX8000CR (1-5/8" ID) are our strongest and most versatile holders. The three-point mounting distributes the stress and provides side support. This heavy duty unit allows you to set your outrigger angle for maximum efficiency. The angle is set by positioning the clamp on the main tube during installation. The main tube of this unit is designed to accept the outrigger in either end so the holder can be mounted above or below any flat surface. A fast pin can be substituted for the bolt connecting the clamp to the wing for bridge laydown capability. Approximate area required for mounting is 14-1/2" x 18".
Recommended poles for MX8000CR
- MX8719CR - 19 ft MX Step- Tube Style
- MX8716CX - 16 ft MX Step- Tube Style - Single Spreader
- MX8719CX - 19 ft MX Step- Tube Style - Single Spreader
- MX8720CX - 20 ft MX Step- Tube Style - Double Spreader
- MX8722CX - 22 ft MX Step- Tube Style - Single Spreader or Double Spreader
Three-point installation can disperse stress and provide side support. This heavy-duty device allows you to set the angle of the outriggers to achieve maximum efficiency. The angle is set by positioning the clamp on the main pipe during installation. The main pipe of the device is designed to receive legs at either end, so the support can be installed above or below any flat surface. Quick pins can be used instead of bolts that connect the fixture to the wing to achieve the bridge's lowering capability. Approximate area required for installation is 14-1 / 2" x 18".
Lee's Center Rigger Holder - Inner Diameter 1-5/8" Related Products
Sika Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - WhiteSika Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - Black
Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Black
Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Aluminum Gray
Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Colonial White
Sika Sikaflex® 505UV High Performance Exterior Grade Sealant - 10.3oz(300ml) Cartridge - White
Sika Sikaflex® 521UV UV Resistant LM Polyurethane Sealant - 10.3oz(300ml) Cartridge - White
Sudbury Elastomeric Marine Sealant - 10oz Cartridge - White
Frequently Asked Questions (FAQ) About Lee's Center Rigger Holder - Inner Diameter 1-5/8"
Who is the Lee's Tackle?How to describe Lee's Center Rigger Holder - Inner Diameter 1-5/8"?
Who is the Lee's Tackle?
For more than 85 years, Lee's Tackle has had an established reputation for building the highest quality equipment using the finest marine materials. As the third generation, Lee's Tackle is proud to carry on its tradition. Whether you own a 15-foot flats skiff or a 120-foot super sport fisherman, you will find a Lee's Tackle product that fits your needs.
How to describe Lee's Center Rigger Holder - Inner Diameter 1-5/8"?
Three-point installation can disperse stress and provide side support. This heavy-duty device allows you to set the angle of the outriggers to achieve maximum efficiency. The angle is set by positioning the clamp on the main pipe during installation. The main pipe of the device is designed to receive legs at either end, so the support can be installed above or below any flat surface. Quick pins can be used instead of bolts that connect the fixture to the wing to achieve the bridge's lowering capability. Approximate area required for installation is 14-1 / 2" x 18".
Save $154 when you buy the Lee's Center Rigger Holder - Inner Diameter 1-5/8" for only $503 from NVN Marine! Same day shipping before 3pm.
Lee's Center Rigger Holder - Inner Diameter 1-5/8" Technical Specifications
| Type: | |
|---|---|
| Vendor: |
Lee's Tackle |
| Weight: |
6.55 lb |
Lee's Center Rigger Holder - Inner Diameter 1-5/8" User Reviews
Lee's Center Rigger Holder - Inner Diameter 1-5/8" Shipping & Return
| Shipping Weight: |
6.55 lb |
|---|---|
| Box Sizes: |
6.00 (h) x 11.00 (w) x 22.00 (l) |
| Cubic Feet: |
1452.0 |
| Returnable: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.