Bilge-B-Dry Single Pump 12v Dry Biilge System
Shipping (3PM)
Within 30 days
Bilge-B-Dry Single Pump 12v Dry Biilge System Product Description
Transform Your Boat's Bilge into a Dry, Odor-Free Zone
Imagine stepping aboard your boat after a stormy outing or a thorough washdown, only to find lingering dampness in the bilge causing musty smells, potential mold growth, and hidden corrosion on wiring and gear. Traditional bilge pumps often leave behind those stubborn last inches of water, especially in modern stepped-hull designs where water pools forward of the step. That's where this innovative dry bilge system shines, quietly and efficiently sucking up every drop to keep your vessel pristine.
Unlike standard pumps that falter at low water levels or risk burnout when running dry, this self-priming diaphragm pump thrives in those conditions. It's built for real-world boating challenges—think heavy rain, sea spray, or even minor leaks—ensuring your cabin stays fresh and your electronics protected. Boaters rave about the peace of mind from its smart scheduling, letting you set custom cycles via a intuitive mobile app, so your bilge stays managed even when you're ashore.
Smart Features That Set It Apart
- App-Controlled Customization: Pair with your smartphone for tailored pump schedules, remote monitoring, and on-demand operation—perfect for forgetting about manual switches.
- Run-Dry Durability: The diaphragm design handles extended dry runs without wear, extending pump life to over 1,000 hours of reliable service.
- Compact and Versatile: Slim profile fits tight spaces in any orientation, ideal for challenging bilge layouts on sailboats, powerboats, or yachts.
- Eco-Friendly Pickup: Low-profile intake with a replaceable filter grabs water efficiently while minimizing debris intake and environmental impact.
- Flexible Wiring: Quick-disconnect harness supports integration with float switches, helm controls, or sensors for automated setups.
Even without the app, it defaults to smart cycling—two minutes every six hours—keeping things simple for traditionalists.
How the Dry Bilge Magic Happens
This system excels at removing water where others can't. The powerful yet efficient 12V pump pulls up to 0.25 gallons per minute with a 10-foot head lift and 5-foot suction, even from shallow pools. Internal plumbing streamlines flow, while the heavy-duty enclosure withstands the marine environment. Connect via Wi-Fi for app control, or let the onboard board handle automatic cycles. Over time, you'll notice less humidity, fewer odors, and a noticeably drier interior that preserves your boat's value.
Pro tip for stepped-hull owners: Position the rectangular pickup forward to target those hard-to-reach puddles, transforming problem areas into dry zones.
Effortless Installation for Any Boater
Setting it up takes minutes, not hours. Mount the compact enclosure (just 4.1" H x 6.8" W x 7" L) securely, attach the provided 10 feet of 1/4" input tubing to the pickup and 6 feet of 3/8" output tubing to your thru-hull. Wire to your 12V battery (8-14VDC range) using the plug-and-play harness. Download the free app, scan the QR code, and customize away. For auto-triggering, add a float switch—common upgrade for unattended boats.
"Installed in under 30 minutes on my 32-foot cruiser. Bilge has stayed bone-dry through a wet summer—game-changer!" – Experienced powerboater
Detailed Performance Specifications
| Specification | Details |
|---|---|
| Max Current | 0.35 amps (12VDC) |
| Idle Current | 0.05 amps (12VDC) |
| Pump Performance | |
| Maximum Flow | 0.25 GPM |
| Pump Head | 10 feet |
| Pump Suction | 5 feet (vertical) |
| Diaphragm Design | Run-dry capable for extended periods |
| Life Expectancy | 1,000+ hours |
| Control Board | |
| Wireless Connectivity | App-enabled (iOS/Android) |
| Board Life Expectancy | 100,000 cycles |
| Certifications | FCC Part 15C (Wi-Fi/RF) |
| Physical Dimensions | |
| Enclosure | 4.1" H x 6.8" W x 7" L |
| Rectangular Pickup | 0.98" H x 2.4" W x 3.9" L |
| Weight | 1.8 lbs (core unit) |
| Input Tubing | 1/4" OD |
| Output Tubing | 3/8" OD |
| Input Voltage | 12VDC (8-14VDC) |
Complete Kit for Immediate Use
- Motor/diaphragm pump assembly
- 10 feet of 1/4" OD input tubing
- 6 feet of 3/8" OD output tubing
- Quick-disconnect wiring harness
- Rectangular bilge pickup with filter
- All mounting hardware and accessories
Frequently Asked Questions
Can this dry bilge pump run without water present?
Yes, the diaphragm design allows it to run dry for extended periods without damage, unlike centrifugal pumps that can overheat.
Is app connectivity required for operation?
No, it auto-cycles for 2 minutes every 6 hours standalone. The app adds customization like scheduling and remote control.
What boats is this best suited for?
Ideal for any vessel, especially stepped-hull boats, sailboats, or yachts where water lingers in low spots after rain, waves, or washdowns.
How do I integrate it with existing float switches?
Use the optional trigger connection on the wiring harness to link with float switches, helm switches, or water sensors for fully automated operation.
What's the power draw, and will it drain my battery?
Very efficient at 0.35 amps max and 0.05 amps idle. Perfect for extended use without significantly impacting battery life.
Can I install it myself, or do I need a professional?
DIY-friendly with included tubing and hardware. Most boaters complete installation in under an hour; no special tools required.
How often should I replace the pickup filter?
Check monthly in debris-heavy waters; replace as needed. The design keeps maintenance minimal for long-term reliability.
Bilge-B-Dry Single Pump 12v Dry Biilge System
Model: BBD-2025-121- The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!
- An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the "step." Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.
- Heavy-duty pump enclosure with improved durability, enhanced pump efficiency and streamlined internal plumbing.
- A choice of four pump configurations in 12vdc or 24vdc for optimal water removal.
- Pump diaphragm design can run dry for extended periods of time without damage.
- A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical).
- Customized pump scheduling with the free Mobile App for Apple and Android devices.
- Quick disconnect wiring harness with optional ""trigger"" connection to a helm switch, float switch or water sensor.
- An environmentally friendly low-profile bilge water pickup design with a replaceable filter system.
- Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity.
BILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!
Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water that accumulates in your bilge. With BILGE-B-DRY, you will finally be able to eliminate cabin odors, reduce mold or corrosion and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!
Specifications| Max current | 0.35 amps (12 vdc) |
| Idle Current | 0.05 amps (12 vdc) |
| Pump | |
| Maximum flow | 0.25 GPM |
| Pump head | 10 feet |
| Pump suction | 5 (vertical) feet |
| Diaphragm design | Able to run dry for extended periods without damage |
| Life expectancy | 1000+ hours |
| Control board | |
| Wireless Connectivity | Yes |
| Life expectancy | 100,000 cycles |
| Wi-Fi & RF Grant | FCC Rule Part 15C |
| Dimensions (in) | |
| Enclosure | 4.1 H x 6.8 W x 7 L |
| Rectangular Pickup | 0.98 H x 2.4 W x 3.9 L |
| Weight | 1.8 LB (not including tubing, pickup, or accessories) |
| Input tubing | 1/4"" Outer Diameter |
| Output tubing | 3/8"" Outer Diameter |
| Input Voltage | 12 vdc (8 — 14 vdc) |
What's in the Box:
- One motor/diaphragm pump
- 10 feet of input tubing (diameter (PVC or PU) - ¼" OD)
- 6 feet of output tubing (diameter (PVC or PU)-3/8" OD)
Bilge-B-Dry Single Pump 12v Dry Biilge System Related Products
Bilge-B-Dry Stainless Steel BracketBuy with the best price Bilge-B-Dry Single Pump 12v Dry Biilge System for only $309 from NVN Marine! Same day shipping before 3pm.
Bilge-B-Dry Single Pump 12v Dry Biilge System Technical Specifications
| Type: | |
|---|---|
| Vendor: |
Lowrance |
| Weight: |
5.0 lb |
Bilge-B-Dry Single Pump 12v Dry Biilge System User Reviews
Bilge-B-Dry Single Pump 12v Dry Biilge System Shipping & Return
| Shipping Weight: |
5.0 lb |
|---|---|
| Box Sizes: |
1.00 (h) x 1.00 (w) x 1.00 (l) |
| Cubic Feet: |
1.0 |
| Returnable: |
Yes |
| USPS First Class: |
Yes |
| P65: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.