PSS PRO SHAFT SEAL 1 3/4" SHAFT AND 3 1/2" TUBE
Free Shipping Special Product
PSS PRO SHAFT SEAL 1 3/4" SHAFT AND 3 1/2" TUBE PRODUCT DESCRIPTION
PRO Shaft Seal 1-3/4" Shaft & 3-1/2" Tube
The PSS PRO Shaft Seal is a mechanical face seal utilizing our proven stainless steel and carbon sealing components, but adds a reinforced silicone bellow, we include external rings standard on sizes +2-1/4" and optional on all smaller sizes, a secondary shaft retention collar, 316 Stainless Steel hose clamps (rolled edges & non-perforated) and an optional Nitronic 50 rotor upgrade (for highly corrosive environments). Designed specifically for applications that will require increased durability and resistance to harsh, corrosive, high pressure and otherwise demanding environments. The PSS PRO Shaft Seal is a specialized mechanical seal that is suitable for a variety of applications, with unmatched performance.
As with PSS Type A & B Seals, The PRO Shaft Seal is a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to a heavy duty silicone bellow which is attached to the vessel’s stern tube (shaft log), with 316SS hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange and is used to compress the bellow , the rotor is then secured to the shaft with set-screws and the shaft retention collar is installed. This compression (pre-load) maintains constant contact between the two mating faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. The carbon flange is over-bored to the shaft diameter allowing it to "float" around the shaft and thus compensate for most misalignment and vibration from the drive-line. The stainless-steel rotor is sealed to the shaft by two O-rings that are recessed into the bore of the rotor. These O-rings rotate with the shaft and the stainless-steel rotor, and therefore do not experience wear during operation.
- Temperature Limits: -13°F to 425°F (-25°C to 220°C)
- Pressure Limits: 40 PSI (2.75 BAR)
- Shaft RPM Limits: 10,000 RPM
- Carbon Graphite: Lapped to 4 HLB (0.000044" tolerance)
- 316SS / Nitronic 50: Faced to 9 Ra
- Bellow Material: Molded formed silicone / fabric
- Shaft Dia. (A) 1-3/4"
- Stern Tube Dia. (B) 3-1/2" to 3-5/8"
- Uncompressed Length (C) 9.268"
- Approx. Compressed Length 8.268"
- Rotor Diameter (D) 3.75"
- Stern Cuff Length (E) 1.3"
PYI PSS PRO shaft seal uses mature stainless steel and carbon seal components, but adds a reinforced silicone bellows, auxiliary shaft fixing ring, 316SS hose clamp and optional Nitronic 50 rotor assembly upgrade (for highly corrosive environments ). The result is a special drip-free mechanical seal suitable for various applications with unparalleled performance and durability. The PSS PRO shaft seal does not replace the PSS Type A seal, but supplements the PSS shaft seal series with this commercial-oriented product. Working principle: Two nitrile O-rings seal the stainless steel rotor to the shaft and will not wear out. Use the main set screws and spare set screws (2 sets) to fix the stainless steel rotor to the shaft to form a seal between the two mating surfaces of the carbon stator and the stainless steel rotor. The raw water is sent to the PSS shaft seal for cooling/lubrication The sealing surface of the high-speed vessel is fixed with the carbon stator fixed on the corrugated pipe. The corrugated pipe is fixed on the stern tube (shaft log) and the shaft fixing ring is fixed on the shaft. If the coupling fails catastrophically or if the shaft is detached from the coupling, It helps to keep the propeller shaft or rudder shaft in your container. Bellows can improve strength, support and durability. The outer ring is a standard part with a size of 2-1/4" (60mm) to 3-3/4" (95mm). For smaller size 316SS hose clamps (with crimping and non-perforated tape), it is an optional soft Tube clamp tail protection device, jacket
Save $126 when you buy the PSS PRO SHAFT SEAL 1 3/4" SHAFT AND 3 1/2" TUBE for only $504 from NVN Marine! Same day free shipping before 3pm.
PSS PRO SHAFT SEAL 1 3/4" SHAFT AND 3 1/2" TUBE VIDEOS
PSS PRO SHAFT SEAL 1 3/4" SHAFT AND 3 1/2" TUBE USER REVIEWS
PSS PRO SHAFT SEAL 1 3/4" SHAFT AND 3 1/2" TUBE SHIPPING & RETURN
6.00 (h) x 7.00 (w) x 11.00 (l)
- To ensure a fast and safe delivery we use UPS and FedEx Ground/Air shipping services.
- Available shipping methods may vary for different type of products and shipping destinations.
- We ALWAYS ship to the address given by the customer unless you tell us before your order is placed.
- Shipping to the PO BOX is not allowed! Your order will not be fulfilled.
- We are following carriers informations, if carrier delivery status is delivered, we will accept order as a delivered, lost packages are the responsibility of the client.
- Returns will ONLY be accepted within 30 days of the purchase.
Our Shipping Rates and Delivery Times for United States (48 state)
|Free Shipping (500$+ orders)||2-7 Days||Free|
|Best Way Shipping||2-7 Days||$8.95|
|Ground Shipping||1-6 Days||$9.95|
|2nd Day [Promo]||2 Days||$16.95|