Airmar B75H Bronze Chirp Thru Hull 20° Tilt - 600W - Requires Mix and Match Cable

The right transducer enhances the performance of any echosounder, no matter what the power level or price. From small jet-ski sensors to large steel-tank transducers, Airmar's depth, speed, and temperature sensors are the most responsive in the market. Airmar prides themself on the little extras that are added to products that make a big difference in performance and customer satisfaction.

600 W

Airmar's low-profile, Chirp-ready, transducers are the perfect addition to smaller boats such as center consoles. The high-frequency band of the B75H, operating between 130 and 210 kHz, has a narrow beamwidth—excellent for pinpointing fish holding tight to wrecks, reefs, and other structures. It also shows amazing target separation on baitfish and schooling gamefish. This transducer delivers up to 80 kHz of total bandwidth in just one installation for clear bottom detail and fish target resolution.

Tilted Element transducers have the ceramic element fixed at a 20°, 12°, or 0° angle within the housing. When the transducer is installed almost flush to the hull, the tilt of the element corrects for the hull deadrise, orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings.

The B75H is available in three Tilted Element models:

• Fixed 20° tilted version for 16 to 24° hull deadrise angles
• Fixed 12° tilted version for 6 to 15° hull deadrise angles
• Fixed 0° tilted version for 0 to 7° hull deadrise angles

• Airmar's broadband transducers ensure you'll never miss a bite, no matter how deep or far away your quarry is.
• The B75H Bronze Chirp Thru Hull 20° Tilt - 600W is the perfect companion for all your fishing needs, whether you're a commercial fisherman, charter captain, or tournament angler.

• This product is a high quality, bronze through hull transducer.
• It is 20 degrees and 600 watts.
• It requires a mix and match cable.
• Airmar's broadband transducers are used for fishing purposes.

The Airmar B75C-20-H-MM is a 20& 176; tlted element transducer with a mix-n-match plug model. The transducer has a depth & fast-response water-temperature sensor, 80 kHz of total bandwidth from one transducer, and covers popular fishing frequency of 200 kHz plus.

12-Pin Chirp

• Airmar's broadband transducers ensure you'll never miss a bite, no matter how deep or far away your quarry is.
• The B75H Bronze Chirp Thru Hull 20° Tilt - 600W is the perfect companion for all your fishing needs, whether you're a commercial fisherman, charter captain, or tournament angler.
• This product is a high quality, bronze through hull transducer.
• It is 20 degrees and 600 watts.
• It requires a mix and match cable.
• Airmar's broadband transducers are used for fishing purposes.
• The B75C-20-H-MM is a thru-hull transducer which is the most popular type of transducer on the market today.
• The thru-hull transducers are available in various frequency ranges, and this model has a frequency range of 200 kHz to 80 kHz.
• The B75C-20 comes with an easy to use plug that can be swapped out depending on your needs.
• Airmar B75C 20& 176; tlted element High CHIRP Bronze Thru Hull with Mix-N-Match Plug Model: B75C-20-H-MM
• Depth & fast-response water-temperature sensor 80 kHz of total bandwidth from one transducer Covers popular fishing frequency of 200 kHz plus

600 W

Depth, Temperature

USA

High

8 (w) X 5 (h) X 12 (l) inches and the weight is: 5.94 lb.

MMC

Tilted Element Thru-Hull

CHIRP-Ready Single-Band

20°

Airmar 12-Pin (MMC)

9 m (30')

Cable Required

Fishing

Bronze

High

214 m (700')

16° to 24°

70 mm (2-13/16")

130-210 kHz

15°-9°

Yes

Fiberglass or wood

95 mm (3.75")

Up to 24°

24°

600 W

Airmar's low-profile, Chirp-ready, transducers are the perfect addition to smaller boats such as center consoles. The high-frequency band of the B75H, operating between 130 and 210 kHz, has a narrow beamwidth—excellent for pinpointing fish holding tight to wrecks, reefs, and other structures. It also shows amazing target separation on baitfish and schooling gamefish. This transducer delivers up to 80 kHz of total bandwidth in just one installation for clear bottom detail and fish target resolution.

Tilted Element transducers have the ceramic element fixed at a 20°, 12°, or 0° angle within the housing. When the transducer is installed almost flush to the hull, the tilt of the element corrects for the hull deadrise, orienting the beam directly down. This ensures maximum echo returns to the transducer for more accurate depth readings.

The B75H is available in three Tilted Element models:

• Fixed 20° tilted version for 16 to 24° hull deadrise angles
• Fixed 12° tilted version for 6 to 15° hull deadrise angles
• Fixed 0° tilted version for 0 to 7° hull deadrise angles