OUT OF STOCK

Actisense OPTO-4 Isolated NMEA to RS232 Adapter

SKU: 51801 - UPC: OPTO-4 - MPN: OPTO-4
$105.39 $121.98 ( / )

We are sorry, this product sold out!

The OPTO-4 provides a safe and low cost way of connecting an NMEA 0183 system to a PC or any other device with a standard RS232 9-pin port. As a bi-directional NMEA 0183 to RS232 interface cable, the OPTO-4 utilizes OPTO-isolation to protect the PC input and spike protection for...
Actisense
Same Day

Shipping (3PM)

Free Returns

Within 30 days

Actisense OPTO-4 Isolated NMEA to RS232 Adapter Product Description

The OPTO-4 provides a safe and low cost way of connecting an NMEA 0183 system to a PC or any other device with a standard RS232 9-pin port. As a bi-directional NMEA 0183 to RS232 interface cable, the OPTO-4 utilizes OPTO-isolation to protect the PC input and spike protection for the PC output, providing comprehensive isolation of PC hardware when connecting to an NMEA 0183 bus.

If isolation in both directions is required, the Actisense USG-2 offers bidirectional isolation in a USB to RS422 (NMEA 0183) form.

The Actisense design integrates an over-molded case for excellent water resistance and a small footprint for installation into tight spaces.

The OPTO-4 takes power from the host RS232 signals including TX and the handshaking lines RTS and DTR, making the OPTO-4 suitable for most PC serial ports.

In systems that cannot provide power on the handshaking lines, e.g. serial devices with only Rx and Tx lines, a DC power supply can be used.



OPTO-4 Isolated NMEA to RS232 Adapter
Isolate an RS232 (PC) port to protect against ground loops...

The Actisense OPTO-4 is a bi-directional NMEA 0183 (RS422) to RS232 interface cable which provides a safe method of connecting an NMEA 0183 system to a laptop PC or any device with a standard RS232 9-pin port. The isolation protects the connected device, so any potentially hazardous voltages on the NMEA 0183 bus do not cause damage to the PC hardware, offering the user complete peace of mind.

The OPTO-4 is particularly suited to 'noisy' or commercial environments, as it provides a complete solution for system builders who require all components to be shielded. As it is port-powered (from the PC), the OPTO-4 is quick and trouble-free to install.

The unique Actisense design integrates an over-moulded case for excellent water resistance and a small footprint to ease installation into tight spaces.

Features:
  • NMEA 0183 & RS232 compliant
  • Full duplex (two-way) communication
  • All baud rates up to 115200 Baud
  • Overmoulded case with a narrow profi le for installing in small spaces
  • Transient protection on the PC output line
  • Opto-isolation providing 2000 volt protection on the PC input line
  • Reverse voltage protection on the PC input line
  • Current limited to protect against cable faults
  • Port-powered; takes power from the PC port
  • Fully shielded for superior noise rejection
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

OPTO-4 isolates the NMEA to RS232 adapter to isolate the RS232 (PC) port to prevent ground loops... Actisense OPTO-4 is a two-way NMEA 0183 (RS422) to RS232 interface cable that can provide...

Frequently Asked Questions (FAQ) About Actisense OPTO-4 Isolated NMEA to RS232 Adapter

Who is the Actisense?
How to describe Actisense OPTO-4 Isolated NMEA to RS232 Adapter?
What is the exterior color of product?
In which country this product made in?
What's the Actisense OPTO-4 Isolated NMEA to RS232 Adapter package dimensions and weight?
What is data interface of the product?
What is the connector type of the product?
What is the length of cable?
What is the communication method of the product?
What is the manufacturer notes about Actisense OPTO-4 Isolated NMEA to RS232 Adapter?

Who is the Actisense?

Actisense is dedicated to supplying intelligent sensors and interfaces that are unrivalled for their quality, features and reliability. Actisense aim to be the installer's product of choice by making navigation safer with the most reliable boat electronic systems. Utilizing over 20 years of specialist experience in the design of DSP software and hardware in the field of smart sensors and underwater acoustics. Actisense is now a market leader in manufacturing intelligent marine electronic products.

How to describe Actisense OPTO-4 Isolated NMEA to RS232 Adapter?

The OPTO-4 provides a safe and low cost way of connecting an NMEA 0183 system to a PC or any other device with a standard RS232 9-pin port. As a bi-directional NMEA 0183 to RS232 interface cable, the OPTO-4 utilizes OPTO-isolation to protect the PC input and spike protection for the PC output, providing comprehensive isolation of PC hardware when connecting to an NMEA 0183 bus.

If isolation in both directions is required, the Actisense USG-2 offers bidirectional isolation in a USB to RS422 (NMEA 0183) form.

The Actisense design integrates an over-molded case for excellent water resistance and a small footprint for installation into tight spaces.

The OPTO-4 takes power from the host RS232 signals including TX and the handshaking lines RTS and DTR, making the OPTO-4 suitable for most PC serial ports.

In systems that cannot provide power on the handshaking lines, e.g. serial devices with only Rx and Tx lines, a DC power supply can be used.

What is the exterior color of product?

Black

In which country this product made in?

China

What's the Actisense OPTO-4 Isolated NMEA to RS232 Adapter package dimensions and weight?

5 (w) X 1 (h) X 4 (l) inches and the weight is: 0.23 lb.

What is data interface of the product?

NMEA 0183

What is the connector type of the product?

Bare Wire

What is the length of cable?

1.5 m (4.9')

What is the communication method of the product?

NMEA 0183/RS232

What is the manufacturer notes about Actisense OPTO-4 Isolated NMEA to RS232 Adapter?

The OPTO-4 provides a safe and low cost way of connecting an NMEA 0183 system to a PC or any other device with a standard RS232 9-pin port. As a bi-directional NMEA 0183 to RS232 interface cable, the OPTO-4 utilizes OPTO-isolation to protect the PC input and spike protection for the PC output, providing comprehensive isolation of PC hardware when connecting to an NMEA 0183 bus.

If isolation in both directions is required, the Actisense USG-2 offers bidirectional isolation in a USB to RS422 (NMEA 0183) form.

The Actisense design integrates an over-molded case for excellent water resistance and a small footprint for installation into tight spaces.

The OPTO-4 takes power from the host RS232 signals including TX and the handshaking lines RTS and DTR, making the OPTO-4 suitable for most PC serial ports.

In systems that cannot provide power on the handshaking lines, e.g. serial devices with only Rx and Tx lines, a DC power supply can be used.



Save $16 when you buy the Actisense OPTO-4 Isolated NMEA to RS232 Adapter for only $105 from NVN Marine! Same day shipping before 3pm.

Actisense OPTO-4 Isolated NMEA to RS232 Adapter Technical Specifications

Type: 

Marine Navigation & Instruments | NMEA Cables & Sensors

Vendor: 

Actisense

Weight: 

0.25 lb

Data Interface: 

NMEA 0183

Product Manual: 

Download PDF

Product Brochure: 

Download PDF

Actisense OPTO-4 Isolated NMEA to RS232 Adapter User Reviews

Actisense OPTO-4 Isolated NMEA to RS232 Adapter Shipping & Return

Shipping Weight: 

0.25 lb

Box Sizes: 

2.00 (h) x 4.00 (w) x 5.00 (l)

Cubic Feet: 

40.0

USPS First Class: 

Yes

For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.

Actisense OPTO-4 Isolated NMEA to RS232 Adapter

$105.39 $121.98 ( / )