Raymarine EV-400 Power Evolution Autopilot

Raymarine EV-400 Power Evolution Autopilot Product Description

The EV-400 Sail Pilot is the perfect solution for large sailboats with mechanical steering. The EV-400 Sail Pilot kit features the p70s color, pushbutton autopilot controller, EV-1 sensor core, ACU-400 actuator control unit, rotary rudder feedback unit, and an Evolution cabling kit. Choose any Type 2 or Type 3 mechanical linear, rotary or hydraulic linear autopilot drive unit to complete the system.

Raymarine T70162 Attributes

• Compatibility: Large Sailboats With Hydraulic Steering
• Dimension: 11.2 Inch Width X 8.3 Inch Height X 2.5 Inch Depth
• Voltage Rating: 12 Volt

Raymarine T70162 Features & Benefits

• Suitable For Large Sailboats With Mechanical Steering Systems
• Works Type 2 Or Type 3 Mechanical Linear, Rotary, Or Hydraulic Linear Drives
• SeaTalk/NMEA2000 For Networking With Instruments And Chartplotters
• Requires No Complicated Setup Or Autopilot Calibration
• Intelligent 9-Axis Heading Sensor That Uses Aerospace Guidance Technology To Adapt And Evolve To Changing Sea Conditions And Vessel Dynamics
• Limited 2 Year Warranty

Raymarine T70162 Installation Instructions

• Evolution EV-2 Installation instructions 87181-4-EN.pdf
• Evolution EV-1 and ACU Installation instructions 87180-6-EN.pdf
• p70 p70R Pilot Controller Installation instructions 87426 (Rev 1) (EN).pdf

Raymarine T70162 Warranties

• Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf

Raymarine T70162 Technical Bulletins

• Evolution EV-1 and ACU Installation instructions 87180-6-EN.pdf
• Evolution autopilot Set-up and Commissioning with p70 and p70R 82285-5-EN.pdf
• ACU 200 300 400 E70099 E70139 E70100 2D PDF.PDF

EV-400 Power Evolution Autopilot

*Requires Type 2 or Type 3 drive units

Features:

• Heavy-duty, 30 Amp output for Type 3 Drives or Constant Running Pumps
• Evolution Ai for superior performance
• NO calibration required
• SeaTalk^ng Network Compatible
• ACU-400 auxiliary power to SeaTalk^ng network
• Includes p70R Autopilot Controller

Includes:

• EV-1 Sensor Core
• p70Rs Autopilot Control Head
• ACU-400 Actuator Control Unit (Includes the M81105 Rotary Rudder Reference)
• Evolution Cabling Kit
• EV Unit O-Ring Pack (set of 2)
• Wall Mounting Bracket

The EV Sensor Core

At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.

Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.

The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalk^ng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalk^ng and NMEA2000 networks.

Features:

• Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change
• Flexible installation options
• Mount above or below deck
• Simple SeaTalk^ng connectivity to the control head and ACU
• Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions
• Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays

p70Rs Autopilot Control Head

The p70R has a convenient rotary control knob and support for multiple autopilot modes including Auto, standby, trolling patterns, and track mode from your GPS or chartplotter.

Features:

• LightHouse user interface is simple and quick to use
• Wide 160° viewing angles
• Start up wizard helps you configure the pilot quickly and easily
• Anti-reflective coating for improved visibility in bright sunlight
• Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness
• Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer
• Simple system and group dimming/illumination
• Support for multiple data sources
• SeaTalk^ng/NMEA2000 and SeaTalk1 connectivity (no bridging required)

ACU-400 Autopilot Control Unit (ACU)

The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalk^ng bus. Choose the ACU that fits your steering system type.

Support Drive Units

Heavy-duty, 30 Amp output for Type 3 Drives or Constant Running Pumps

Evolution Cabling Kit

• 1 x SeaTalk^ng Power Cable (0.4m)
• 1 x SeaTalk^ng Backbone Cable (5m)
• 1 x SeaTalk^ng Spur Cable (0.4m)
• 1 x SeaTalk^ng 5-way Connector Block
• 2 x SeaTalk^ng T-piece Connector
• 2 x SeaTalk^ng Terminator

The Raymarine Evolution series autopilot is equipped with ACU400 processor, p70r control head and EV-1 sensor, designed to simplify operation, while the Evolution autopilot does not require complicated settings and calibration. Once Evolution is installed, getting started is as easy as turning on the autopilot. Thanks to the core of the smart EV sensor, the autopilot can automatically evolve and adapt to the steering characteristics of your vessel without the user having to make any adjustments. Raymarine has 30 years of autopilot expertise, FLIR Systems' research and development and advanced aviation guidance technology have reached its peak, and the Evolution AI control algorithm has brought precise autopilot control to a new level. This innovative breakthrough in autonomous driving intelligence technology enables the Evolution autopilot to perceive its environment, and then immediately calculate and develop steering commands to maximize performance. Regardless of the ship's sailing speed or sea conditions, the result is accurate and reliable route maintenance. At the center of each Evolution system is the core of the smart EV sensor, which is a 9-axis sensor that can monitor ship movement in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors and the Evolution autopilot processor into an easy-to-install housing. Install the EV sensor core above or below the platform. The sturdy housing is completely sealed and meets IPX6 and IPX7 waterproof and immersion standards.

Raymarine EV-400 Power Evolution Autopilot Related Products

Octopus 30" Hose & Fitting Kit Including Orb & NPT Helm Fittings




Buy with the best price Raymarine EV-400 Power Evolution Autopilot for only $3499 from NVN Marine! Same day fast and free shipping before 3pm.