Octopus 7" Stroke Mounted 38mm Bore Linear Drive - 12V - Up to 45' or 24,200lbs
Free Ground Shipping (2-6 Days Delivery Time)
It will be shipped by UPS Ground.
Octopus 7" Stroke Mounted 38mm Bore Linear Drive - 12V - Up to 45' or 24,200lbs Product Description
Octopus offer a full range of powerful, low current consumption hydraulic linear drives designed for long passage making. An independent comparison by the University of British Columbia* showed that Octopus piston pumps are three times more efficient than a gear pump and can be expected to halve the battery consumption when compared to a competitor’s unit, therefore doubling the effective range of the autopilot on one battery charge. A linear drive that does not have variable flow (unless dedicated to a range of yachts) will be operating either too quickly or too slowly in 90 Percent of cases. Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate. However, this either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or the pump will operate at high pressure for short periods of time – also putting unnecessary strain and wear on the system.
Octopus AF1012LAM7 Attributes
- Compatibility: Boats Up To 45 Feet Long
- Drive Type: Hydraulic Linear
- Stroke Length: 7 Inch
- Maximum Thrust: 882 Pound
- Input Voltage: 12 Volt
- Motor Current Rating: 19 Amp
Octopus AF1012LAM7 Features & Benefits
- Reliable: Only Three Moving Parts, Increasing Reliability
- Efficient- Three Times More Efficient, Half The Battery Consumption
- Adjustable Flow Rate: Configure Performance To Suit Your Vessel
- Octopus Linear Drives Are Available With A Large Range Of Stroke And Pump Sizes
- Limited 2 Year Warranty
Linear Actuators
OCTAF1012LAM7
An Octopus Hydraulic Linear Actuator is a simple, effective way to drive the rudder on a boat equipped with a mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. This assembly is mounted on the rudder tiller-arm or quadrant. When the autopilot is not in use the cylinder runs freely along with the rudder. When the automatic pilot is in use a solenoid valve on the actuator closes and locks the cylinder. Steering signals from the pilot are now fed to the D.C. motor, which drives the pump to move the cylinder back and forth. De-energized, the solenoid valve immediately disconnects the automatic pilot from the rudder. The actuator has a small translucent oil reservoir, making it easy to check fluid levels. These actuators have only five moving parts. Mechanical simplicity gives our product reliability and ease of service when compared to complicated gear and screw actuators, making our units a favorite for offshore mariners. These actuators are shipped from our factory completely filled with oil and require no additional plumbing.
Features
The Octopus Autopilot hydraulic linear actuator up to 45 or 24,200 lbs. 7-stroke is a simple and effective way to drive a rudder equipped with a mechanical steering system. The linear actuator is a component of the octopus reversing pump and the marine hydraulic cylinder. The component is installed on the tiller or quadrant.
Frequently Asked Questions (FAQ) About Octopus 7" Stroke Mounted 38mm Bore Linear Drive - 12V - Up to 45' or 24,200lbs
Who is the Octopus Autopilot Drives?How to describe Octopus 7" Stroke Mounted 38mm Bore Linear Drive - 12V - Up to 45' or 24,200lbs?
What is the type of the product?
What is the compatibility of this product?
Who is the Octopus Autopilot Drives?
How to describe Octopus 7" Stroke Mounted 38mm Bore Linear Drive - 12V - Up to 45' or 24,200lbs?
- Drive the rudder on a boat
- Simple and effective
- No more struggling with ropes
- Linear actuator is a simple and effective way to drive the rudder on a boat
- Marine linear actuator is an assembly of an Octopus reversing pump and a marine
- Actuator assembly works with any mechanical steering system
What is the type of the product?
- Drive the rudder on a boat
- Simple and effective
- No more struggling with ropes
- Linear actuator is a simple and effective way to drive the rudder on a boat
- Marine linear actuator is an assembly of an Octopus reversing pump and a marine
- Actuator assembly works with any mechanical steering system
- The pump is designed for use with a variety of fluids, including water, oils, coolants, and other chemicals.
- It is suitable for a wide range of industries such as food processing, chemical and pharmaceutical manufacturing, automotive repair shops and the mining industry.
- The pump can be used in many different applications including residential irrigation systems.
- The AF1012LAM7 pump is the ultimate in power and efficiency.
- It's a linear drive pump with a 7" stroke and a maximum flow rate of 5000cc/min.
- The pump comes with an octopus manifold, which is great for mounting to your engine block.
What is the compatibility of this product?
Save $776 when you buy the Octopus 7" Stroke Mounted 38mm Bore Linear Drive - 12V - Up to 45' or 24,200lbs for only $1619 from NVN Marine! Same day free shipping before 3pm.
Octopus 7" Stroke Mounted 38mm Bore Linear Drive - 12V - Up to 45' or 24,200lbs Technical Specifications
Type: | |
---|---|
Vendor: |
Octopus Autopilot Drives |
Weight: |
20.5 lb |
Type: |
Pumps/Drives |
User Guide: |
Octopus 7" Stroke Mounted 38mm Bore Linear Drive - 12V - Up to 45' or 24,200lbs User Reviews
Octopus 7" Stroke Mounted 38mm Bore Linear Drive - 12V - Up to 45' or 24,200lbs Shipping & Return
Shipping Weight: |
20.5 lb |
---|---|
Box Sizes: |
8.00 (h) x 8.00 (w) x 39.00 (l) |
Cubic Feet: |
2496.0 |
Returnable: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.