Magnum MS2012L 2000W Inverter 12v W/100A PFC Charger

Magnum MS2012L 2000W Inverter 12v W/100A PFC Charger Product Description

Sensata Technologies – a pure sine wave inverter designed specifically for the most demanding mobile, backup, and off-grid applications.

Magnum Energy MS2012LU Attributes

• Output Voltage: 120 Volt AC
• Input Voltage: 12 Volt DC
• Continuous Output Power (W): 2000 Watt
• Peak Output Power (W): 3300 Watt
• Ampere Rating: 16.7 Amp
• Efficiency: 90 Percent
• Number Of AC Outlets: 2
• Length (IN): 13-3/4 Inch
• Width (IN): 12.65 Inch
• Height (IN): 8 Inch
• Remote On/Off Capable: Yes
• With USB Port: No
• With Volt/Watt Meter: No
• With Short Circuit: No
• With Reverse Battery Protection: No
• With Thermal Protection: Yes
• With Battery Cables: No
• With Built-In Charger: Yes
• With Fuse: No

Magnum Energy MS2012LU Features & Benefits

• Pure Sine Wave: Power Your T.V. S, Stereos, Plasma Screens, And Other Sensitive Electronics Without Worry
• Pure Sine Wave Inverter And Power Factor Corrected Charger Provide Clean, Reliable Inverter Power With Low Total Harmonic Distortion (THD) Of Less Than 5 Percent
• Lightweight: The Lightweight Aluminum Base And Cover Also Provides Noise Reduction And Corrosion Resistance
• Expanded Transfer Relay: 60 Amp Transfer Service On All Models
• Versatile Mounting: Mount The MS Series On A Shelf, Bulkhead, Or Even Upside Down
• Easy To Install
• Limited 3 Year Warranty

Magnum Energy MS2012LU Installation Instructions

• 64-0007 Rev F MS Series_Web_1.pdf

Magnum Energy MS2012LU Technical Bulletins

• MS-series_datasheet_64-0200-RevO_web.pdf
• MS-series_datasheet_64-0200-RevO_web.pdf

The MS Series Inverter/Charger from Magnum Energy ? a pure sine wave inverter designed specifically for the most demanding mobile and off grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective.

Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger ? using 25-30% less AC current than standard chargers.

Safe and reliable: The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.

Easy-to-install: Install the MS Series in four easy steps: simply connect the inverter?s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter?s easy-to-reach terminal block, connect the batteries, and switch on the power

Features:

Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

Choices: The MS Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.

Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.

Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

Convenient switches: The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.

Expanded transfer relay: 60 Amp transfer service is available on all models.

Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty

Specification	MS2000	MS2012	MS2812	MS4024
Input battery voltage range	9 -17 VDC	9 - 17 VDC	9 - 17 VDC	18 - 34 VDC
Nominal AC output voltage	120 VAC	120 VAC	120 VAC	120 VAC
Outpput frequency and accuracy	60 Hz ± 0.04%	60 Hz ± 0.04%	60 Hz ± 0.04%	60 Hz ± 0.04%
Tptal harmonic distortion (THD)	<5%	<5%	<5%	<5%
1 msec surge current (amps AC)	50	50	70	120
100 msec surge current (amps AC)	33	33	40	72
5 sec surge power (real watts)	3300	3300	3900	5800
30 sec surge power (real watts)	3100	3100	3800	5400
5 minute surge power (real watts)	2800	2800	3200	4900
30 minute surge power (real watts)	2200	2200	3000	4500
Continuous power output at 25° C	2000 VA	2000 VA	2800 VA	4000 VA
Rated input battery current	225 ADC	225 ADC	267 ADC	204 ADC
Inverter efficiency	89%	89%	88%	87%
Transfer Time	16 msecs	16 msecs	16 msecs	16 msecs
Search Mode (typical)	5 watts	7 watts	7 watts	7 watts
no Load (120 VAc output, typical)	25 watts	25 watts	30 watts	25 watts
Wave Form	Pure Sine Wave	Pure Sine Wave	Pure Sine Wave	Pure Sine Wave
Charger Specifications
Continuous output at 25° C	100 ADC	100 ADC	125 ADC	105 ADC
Charger efficiency	85%	85%	85%	85%
Power factor	>.95	>.95	>.95	>.95
Input current at rated output (AC amps)	15	15	18	29
General Features and Capabilities
Transfer relay capability	MS2000: 30 A single input MS2012, MS2812, MS4024: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service
Five stage charging capability	Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Battery temperature compensation	Yes, 15 ft Battery Temp Sensor standard
Remote available (optional)	Yes, MM-RC or ME-RC
Internal cooling	0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Over current protection	Yes, with overlapping circuits
Over temperature protection	yes on transformer,MOSFETS, and battery
Conformal coating on PCB?s for corrosion protection	Yes
Powder coated chassis & top for corrosion protection	Yes
Stainless steel fasteners for corrosion protection	Yes
Dual AC branch rated output breakers	20A on MS2000-20B
Listings	ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard
Warranty	3 Years
Enviromental Specifications
Operating temperatures	-20° C to +60° C (-4° F to 140° F)
Non-operating temperature	-40° C to +70° C (-40° F to 158° F)
Operating Humidity	0 to 95% RH non condensing
Physical specifications
Dimensions (l x w x h)	13.75? x 12.65? x 8.0? (34.9 cm x 32.1 cm x 20.3 cm)
Mounting	Shelf (top or bottom up) or bulkhead (vents up)
Weight	40 lb	42 lb	55 lb	55 lb

Features Even at low AC voltage, the sine wave charger can efficiently charge the battery, and the improved sine wave inverter can reduce costs. The battery temperature sensor can be used in conjunction with the charger to achieve the best charging effect. The MS series offers three power models as well as 12 volt and 24 volt configurations. Flash programming facilitates memory upgrades. Multifunctional installation: This model can be installed on shelves, partitions, or even upside down. Lightweight base and cover can reduce noise and have corrosion resistance. MS series provides multiple ports, including RS485 communication port for network expansion and a remote port accessible design and convenient switch 50 Amp transmission service is applicable to all models.



Save $532 when you buy the Magnum MS2012L 2000W Inverter 12v W/100A PFC Charger for only $1849 from NVN Marine! Same day free shipping before 3pm.