Xantrex FREEDOM EX 4000 - 4000W Inverter/Charger 80A 120V/48VDC
Truck Freight Shipment ($299)
Xantrex FREEDOM EX 4000 - 4000W Inverter/Charger 80A 120V/48VDC Product Description
The new FREEDOM EX 4000 is a truly unique, true sine wave power solution packing a powerful 48 Volt DC, 4000 Watt (8000W > 5s surge) inverter, 80 Ampere 48 Volt DC battery charger, 50 Ampere transfer relay and a 48 Volt DC to 12 Volt DC, 45 A converter inside one box. Designed for mobile applications that utilize 48Vdc battery systems, the FREEDOM EX 4000 is designed to work as a standalone AC and DC power solution or supplement an existing generator to create a hybrid system. The built-in AGS (Automatic Generator Start) module enables the FREEDOM EX4000 to start a generator at configurable low battery voltage settings to charge batteries and produce additional power needed to support an electrical system powered primarily by a generator. The FREEDOM EX 4000 features the most widely used communication protocols – RV-C (RV), J1939 (Truck) and NMEA 2000 (Marine) enabling it to be used in virtually any application that requires integration with 3rd party MFPs and software.
Xantrex 820408041 Attributes
- Output Voltage: 120 Volt AC
- Input Voltage: 12 Volt DC
- Continuous Output Power (W): 4000 Watt
- Peak Output Power (W): 8000 Watt
- Ampere Rating: 33 Amp
- Length (IN): 17.1 Inch
- Width (IN): 14 Inch
- Height (IN): 8.1 Inch
- Remote On/Off Capable: Yes
- With USB Port: Yes
- With Volt/Watt Meter: No
- With Short Circuit: No
- With Reverse Battery Protection: No
- With Thermal Protection: Yes
- With Battery Cables: No
- With Built-In Charger: Yes
- With Fuse: No
Xantrex 820408041 Features & Benefits
- Voltage Converter; 48 Volt DC To 12 Volt DC Output, Simplifies Installation, Fewer Components, Fewer Cables, Reduced Installation Time
- Power Factor Correction, Temperature Compensation, Power Share, Battery Equalization And The Ability To Configure Charging Profile And Stages And Set Charge Output To Desired Amps
- Built-In 50 Ampere Transfer Relay
- Extended Surge Rating Surges To 2X Continuous Power For 5 Seconds Or More For Motor Loads
- True Sine Wave AC Power For Operation Of Sensitive And Motor Loads
- Ignition Control Feature To Turn Inverter On And Off Via A 12 Volt DC Signal And To Minimize Battery Drain By Switching The Inverter Off When The Ignition Key Is Turned Off
- Stacking Support Stack Up To Six Units
- Highly Configurable Charger Specifically Designed For Lithium Ion Batteries
- Limited 3 Year Warranty
FREEDOM EX 4000 - 4000W Inverter/Charger 80A 120V/48VDC
The FREEDOM EX 4000 is a truly unique, true sine wave power solution packing a powerful 48VDC, 4000W (8000W [5s]) inverter, 80A 48VDC battery charger, 50A transfer relay, and a 48VDC to 12VDC, 45A converter inside one box. Designed for mobile applications that utilize 48VDC battery systems, the FREEDOM EX 4000 is designed to work as a standalone AC and DC power solution or supplement an existing generator to create a hybrid system. The FREEDOM EX 4000 features the most widely used communication protocols – RV-C (RV), enabling it to be used in virtually any application that requires integration with 3rd party MFPs and software.
Features:
- Stack up to 3 units in parallel; up to 2 units in series
- 48VDC to 12VDC converter output
- Highly configurable charger specifically designed for lithium-ion batteries
- Built-in 50A Transfer Relay
- Extended Surge Rating to 2X continuous power for 5 seconds
- True Sine Wave AC Power
- Ignition Control Feature to turn the inverter on/off via a 12VDC signal
- Easily configurable settings to charge any lithium-ion battery
Frequently Asked Questions (FAQ) About Xantrex FREEDOM EX 4000 - 4000W Inverter/Charger 80A 120V/48VDC
Who is the Xantrex?How to describe Xantrex FREEDOM EX 4000 - 4000W Inverter/Charger 80A 120V/48VDC?
Who is the Xantrex?
How to describe Xantrex FREEDOM EX 4000 - 4000W Inverter/Charger 80A 120V/48VDC?
Xantrex Freedom EX 4000 Inverter/Charger with 48VDC-to-12VDC Converter
Model: 820-4080-41- Stack up to 3 units in parallel; up to 2 units in series
- 48VDC to 12VDC converter output
- Highly configurable charger specifically designed for lithium ion batteries
- Built-in 50A Transfer Relay
- Extended Surge Rating to 2X continuous power for 5 seconds
- True Sine Wave AC Power
- Ignition Control Feature to turn inverter on/off via a 12VDC signal
The new FREEDOM EX 4000 is a truly unique, true sine wave power solution packing a powerful 48VDC, 4000W (8000W [5s]) inverter, 80A 48VDC battery charger, 50A transfer relay and a 48VDC to 12VDC, 45A converter inside one box. Designed for mobile applications that utilize 48VDC battery systems, the FREEDOM EX 4000 is designed to work as a standalone AC and DC power solution or supplement an existing generator to create a hybrid system. The FREEDOM EX 4000 features the most widely used communication protocols — RV-C (RV), enabling it to be used in virtually any application that requires integration with 3rd party MFPs and software.
SpecificationsELECTRICAL SPECS - INVERTER | |
AC Output Operating Voltage Options | 105 - 130VAC |
Continuous Output Power | Continuous Power 4000 W @40 C True sine wave (TSW) at 120Vac |
Continuous AC Output Current | 33A |
Surge Power | 8000W(5 sec) |
Frequency | 60Hz |
ELECTRICAL SPECS - BATTERY CHARGER | |
Nominal DC Output Voltage | 48VDC |
Charger Voltage Range | 40 - 64VDC |
Maximum DC Output Current (user configurable down to 5 A) | 80A |
Supported Battery Types | Flooded, Gel, AGM, Lithium Ion, Custom |
ELECTRICAL SPECS - PASS-THROUGH | |
AC Input Voltage: | |
Single-phase (L1 - N and L2 - N) | 80 - 138Vac |
Split-phase* (L1 - L2) | 160 - 276Vac |
Frequency (input/output) | 60Hz |
Continuous AC current (input/output) | 40A |
ELECTRICAL SPECS - 12 VDC POWER SUPPLY | |
Nominal DC Output Voltage (fully regulated) | 13.5VDC |
Maximum DC Output Current | 45ADC continuous (at 77 F (25 C) ambient) |
Typical Application* Powering | 12 VDC Loads |
ELECTRICAL SPECS - COMMUNICATIONS SUPPORTED | |
Recreational Vehicles (RV) | RV-C Protocol |
Trucking Vehicles (future offering) | J-1939 Protocol |
Marine Vessels (future offering) | NMEA-2000 Protocol |
GENERAL SPECS | |
Operating Temperature Range | 14 to 140 F (-10 to 60 C), with output derated above 104 F (40°C) |
Storage Temperature Range | -40 to 158 F (-40 to 70 C) |
Operating Humidity Range | 5 to 95% RH, non-condensing |
Transfer Relay AC Current Rating | 50A (40A continuous) |
L x W x H | 17.1in (434mm) x 14in (354mm) x 8.1in (205mm) |
Net Weight | 79.4lbs (36.0kg) |
What's in the Box:
- Freedom EX 4000
- Installation guide
- pair of ½"" bushings
- pair of ¾"" bushings
- one network terminator "
- The FREEDOM EX 4000 is a powerful, true sine wave power solution that packs a whopping 4000W (8000W [5s]) inverter, 80A 48VDC battery charger, 50A transfer relay, and a 48VDC to 12VDC.
- This inverter/charger is the perfect solution for powering your sensitive electronics and appliances in areas with unstable power grids or where you are subject to frequent blackouts.
- The FREEDOM EX 4000 has a powerful 48VDC, 4000W (8000W [5s]) inverter capable of powering your entire home or office.
- The FREEDOM EX 4000's 80A battery charger is able to charge a 48VDC battery in as little as 2 hours.
- The 50A transfer relay allows for easy transfer of power between the inverter and your batteries, reducing strain on the inverter.
- The FREEDOM EX 4000 is a true sine wave power solution that can be used to power anything from a small business to an entire neighborhood.
- The inverter features 4000W of continuous output and 8000W of peak output for 5 seconds, handling the most demanding tasks with ease.
- The battery charger is designed to charge any type of 48VDC battery and features 80A max charging current and 50A max transfer current.
Save $603 when you buy the Xantrex FREEDOM EX 4000 - 4000W Inverter/Charger 80A 120V/48VDC for only $2789 from NVN Marine! Same day free shipping before 3pm.
Xantrex FREEDOM EX 4000 - 4000W Inverter/Charger 80A 120V/48VDC Technical Specifications
Type: | |
---|---|
Vendor: |
Xantrex |
Weight: |
86.0 lb |
User Guide: | |
Product Manual: | |
Product Installation: |
Xantrex FREEDOM EX 4000 - 4000W Inverter/Charger 80A 120V/48VDC User Reviews
Xantrex FREEDOM EX 4000 - 4000W Inverter/Charger 80A 120V/48VDC Shipping & Return
Shipping Weight: |
86.0 lb |
---|---|
Box Sizes: |
12.00 (h) x 16.00 (w) x 21.00 (l) |
Cubic Feet: |
4032.0 |
Oversize Item: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.