OUT OF STOCK

Lenco 19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit 12V

Free Ground Shipping (2-6 Days Delivery Time)

SKU: 29267 - UPC: 874847004688 - MPN: 15046-101
$1,819.99 $3,279.00 ( / )

We are sorry, this product sold out!

Lenco 19" x 14" XD Performance Trim Tab Kit 10-Gauge Electro-Polished Blades / Dual 12-Volt Actuators Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim...
Lenco Marine
Same Day

Shipping (3PM)

Free Returns

Within 30 days

Lenco 19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit 12V Product Description

Lenco 19" x 14" XD Performance Trim Tab Kit 10-Gauge Electro-Polished Blades / Dual 12-Volt Actuators Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious. Lenco Electric Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. All the robust features of our single actuator XD series with twice the actuator power for larger, faster boats that dont back away from rough conditions. Boat lengths 23' (7 m) to 50' (15.2 m). Blades are constructed of Electro-Polished 10 gauge (3.4 mm) laser cut 304 stainless steel with 1" (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 3/8" (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets,3/8" (9.5 mm) stainless steel mounting bolts. 3.75" (9.5 cm) sacrificial anodes installed.

Lenco 15046101 Attributes

  • Tab Size: 19 Inch Length x 14 Inch Width
  • Material: Stainless Steel

Lenco 15046101 Features & Benefits

  • L" X W": 19" x 14"
  • Boat Length: 23' - 45'
  • Min. Transom Height: 10.5" (26.7 cm)
  • Note: Boat-mounting hardware to be supplied by the customer
  • Note: Actuator extension harnesses not in kits, must be purchased separately (4 required)

Lenco 15046101 Installation Instructions

Lenco 15046101 Technical Bulletins


19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit- 12V- Dual Actuator Kit

Lenco Electric Extreme Duty Polished Blade Trim Tab Kits feature fast response actuators for precise control. They are fully submersible and feature Plug & Play Deutsch connections. Blades are Electro-Polished 10 Gauge - 304 SS with 1" turned up edges, an 85 degree inside taper and 3/8"diameter hinge pin. Extreme Duty actuators with 3/8" SS bolts. Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.

Kit Contents:

  • 2 each of stainless steel trim tab planes
  • 4 each of #15056-001XD extreme duty actuators with 6" lead & Deutsch plugs
  • Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets and 3.75" sacrificial anodes.

The following to be supplied by customer:

  • Boat mounting hardware
  • Actuator extension harnesses (2 for single actuator application or 4 for dual)
    will be required. Order the lengths of your choice. See the Lenco
    Accessories section.

Specifications:

  • Suggested Boat Length: 23' to 45'
  • Length of Tab: 19"
  • Width of Tab: 14"
  • Minimum Transom Height: 10.5"
  • Blades: 10 Gauge Stainless Steel
  • Finish: Electro-Polished
  • Switch Kit: Sold Separately
  • Class: Fuel Efficient
  • Compliance: CE Certified
  • Compatibility: Any Boat
  • Switch Required: 15071-001 
  • Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.



The extreme performance trim tab quickly responds to electric actuators for precise control. Complete diving. All plug-and-play Deutsch connections. The blade is electropolished 10...

Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 Rudder Anode - Zinc - 2-13/16" Diameter
Tecnoseal R3 Rudder Anode - Zinc - 3-3/4" Diameter
Tecnoseal R1AL Rudder Anode - Aluminum - 1-7/8" Diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" Diameter
Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" Diameter
Tecnoseal R1MG Rudder Anode - Magnesium - 1-7/8" Diameter
Tecnoseal R2MG Rudder Anode - Magnesium - 2-13/16" Diameter
Tecnoseal R3MG Rudder Anode - Magnesium - 3-3/4" Diameter
Sika Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - White


Frequently Asked Questions (FAQ) About Lenco 19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit 12V

Who is the Lenco Marine ?
How to describe Lenco 19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit 12V?
What is the material of Lenco 19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit 12V?

Who is the Lenco Marine ?

Trim tabs make the single most important difference in the way your boat will ride and perform. Lenco trim tabs will make your boat ride smoother, drier, faster and with increased safety whether on a high-performance, family cruiser or small skiff. Lenco's ballscrew design is more reliable, twice as powerful and features an instant response which makes them very user friendly.

How to describe Lenco 19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit 12V?

The extreme performance trim tab quickly responds to electric actuators for precise control. Complete diving. All plug-and-play Deutsch connections. The blade is electropolished 10...

What is the material of Lenco 19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit 12V?

Stainless Steel


Save $1459 when you buy the Lenco 19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit 12V for only $1819 from NVN Marine! Same day free shipping before 3pm.

Lenco 19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit 12V Technical Specifications

Type: 

Boat Outfitting | Trim Tabs

Vendor: 

Lenco Marine

Weight: 

66.0 lb

Product Brochure: 

Download PDF

Lenco 19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit 12V User Reviews

Lenco 19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit 12V Shipping & Return

Shipping Weight: 

66.0 lb

Box Sizes: 

16.00 (h) x 18.00 (w) x 27.00 (l)

Cubic Feet: 

7776.0

Returnable: 

Yes

P65: 

Yes

For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.

Lenco 19" x 14" Extreme Duty Performance Trim Tab Kit w/o Switch Kit 12V

$1,819.99 $3,279.00 ( / )