Magnum ME2512 2500W Inverter 12v W/120A PFC Charger
Free Ground Shipping (2-6 Days Delivery Time)
It will be shipped by UPS Ground.
- Packing length: 44.45 cm
- Packaging width: 41.147 cm
- Packaging height: 35.052 cm
- Product Type: Fishing Equipment
Magnum ME2512 2500W Inverter 12v W/120A PFC Charger Product Description
Magnum Energy ME2512U Attributes
- Output Voltage: 120 Volt AC
- Input Voltage: 9-16 Volt DC
- Continuous Output Power (W): 2500 Watt
- Peak Output Power (W): 5000 Watt
- Ampere Rating: 120 Amp
- Efficiency: 91 Percent
- Number Of AC Outlets: 1
- Length (IN): 8 Inch
- Width (IN): 12.65 Inch
- Height (IN): 13-3/4 Inch
- Remote On/Off Capable: Yes
- With USB Port: No
- With Volt/Watt Meter: Yes
- With Short Circuit: Yes
- With Reverse Battery Protection: Yes
- With Thermal Protection: Yes
- With Battery Cables: Yes
- With Built-In Charger: Yes
- With Fuse: No
Magnum Energy ME2512U Features & Benefits
- Engineered For Outstanding Performance
- Provide High-Efficiency Power At Full-Load Conditions
- Limited 2 Year Warranty
Reliable Mobile Power from Magnum Energy
The ME Series Inverter/Charger from Magnum Energy is a new generation inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective.
Safe and reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable.
Easy-to-install: Install the ME Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's
easy-to-reach terminal block, connect the batteries, and switch on the power.
Features
The ME Series Inverter/Charger is loaded with features:
Power Factor Corrected (PFC) Charger: The charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger - using only 15 amps per 100 amps versus 23 amps used by standard chargers.
Choices: The ME Series comes in three power models, allowing you to choose the model that is right for you.
Versatile mounting: Mount the ME Series on a shelf, bulkhead, or even upside down.
Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports: The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches: The ME Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Expanded transfer relay: 60 Amp transfer service is available on all models.
Buy with ease: The ME Series is backed by a three-year (36-month) limited warranty.
Accessories and Options*
Remote control: For convenient finger-tip operation, including the new one-knob? programming.
AGS module: Automatically starts and stops your generator based on temperature or battery voltage.
Inverter Specification | ME2012 | ME2512 | ME3112 |
Input battery voltage range | 9 - 16 VDC | 9 - 16 VDC | 9 - 16 VDC |
Nominal AC output voltage | 120 VAC | 120 VAC | 120 VAC |
Output frequency and accuracy | 60 hz 0.1Hz | 60 hz 0.1Hz | 60 hz 0.1Hz |
1 msec surge current (amps AC) | 60 | 100 | 120 |
100 msec surge current (amps AC) | 37 | 45 | 50 |
5 sec surge power (real watts) | 3700 | 5000 | 6000 |
30 sec surge power (real watts) | 3450 | 4500 | 4800 |
5 minute surge power (real watts) | 3100 | 3500 | 3950 |
30 minute surge power (real watts) | 2400 | 2900 | 3500 |
Continuous power at 45° C | 2000 VA | 2500 VA | 3100 VA |
Maximum continuous input current | 266 ADC | 333 ADC | 413 ADC |
Inverter efficiency (peak) | 95% | 91% | 90% |
Transfer time | 16 msecs | 16 msecs | 16 msecs |
Search mode ( Typical) | 5 watts | 5 watts | 5 watts |
No load ( 120 VAC output ) Typical | 20 watts | 23 watts | 25 watts |
Wave Form | Modified Sine Wave | ||
Charger Specifications | |||
Continuous output at 45° C | 100 ADC | 120 ADC | 160 ADC |
Charger efficiency | 85% | 85% | 85% |
Power factor | > .95 | > .95 | > .95 |
Input current at rated output (AC amps) | 15 | 18 | 21 |
General Features and Capabilities | |||
Transfer relay capability | 2 legs at 30 A for 120 V/30 A or 240 V/60 A service | ||
Five stage charging capability | Bulk, Absorb, Float, Equalize, and Battery Saver™ | ||
Battery temperature Compensation | Yes, 15 foot battery temp sensor standard | ||
Internal cooling | 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans | ||
Overcorrect protection | Yes, with two overlapping circuits | ||
Conformal coating on PCB's for corrosion protection | Yes | ||
Over temperature protection | Yes, On Transformer, MOSFETS, and battery | ||
Stainless steel fasteners for corrosion protection | Yes | ||
Dual AC branch rated output breakers | On the ME2012-20B only - AC breakers in 20 amp ratings | ||
Listings | ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01 | ||
Warranty | 3 Years | ||
Environmental Specifications | |||
Operating temperature | -20° C to +60° C (-4° F to 140° F) | ||
Nonoperating temperature | -40° C to +70° C (-40° F to 158° F) | ||
Operating humidity | 0 to 95% RH non condensing | ||
Physical Specifications | |||
Dimensions (h x w x d) | 13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm) | ||
Mounting | Shelf (top or bottom up) or bulkhead (vents up) | ||
Max operating altitude | 15,000 feet | ||
Weight | 37 lb | 41 lb | 46 lb |
Introduce the ME series InverterCharger. A new generation inverter designed for use in rugged and durable recreational vehicles. The ME series is powerful, easy to use, and most importantly, cost-effective. The safe and reliable ME series is ETL certified and meets the strict requirements of ULcUL 458 to ensure the safety and reliability of the inverter. The temperature rating reaches 45C. Easy to install and use easy-to-connect terminal blocks, single-in single-out, double-in, double-out and single-in and double-out installation ME series. Replace most brands of inverter chargers on the market. Even at low AC voltage, sine wave chargers can efficiently charge the battery, and the improved sine wave inverter can reduce costs. In addition, the included battery temperature sensor can be used in conjunction with the charger to achieve the best battery charging.
Frequently Asked Questions (FAQ) About Magnum ME2512 2500W Inverter 12v W/120A PFC Charger
Who is the Magnum?How to describe Magnum ME2512 2500W Inverter 12v W/120A PFC Charger?
Who is the Magnum?
How to describe Magnum ME2512 2500W Inverter 12v W/120A PFC Charger?
Save $993 when you buy the Magnum ME2512 2500W Inverter 12v W/120A PFC Charger for only $731 from NVN Marine! Same day free shipping before 3pm.
Magnum ME2512 2500W Inverter 12v W/120A PFC Charger Technical Specifications
Type: | |
---|---|
Vendor: |
Magnum |
Weight: |
46.0 lb |
Magnum ME2512 2500W Inverter 12v W/120A PFC Charger User Reviews
Magnum ME2512 2500W Inverter 12v W/120A PFC Charger Shipping & Return
Shipping Weight: |
46.0 lb |
---|---|
Box Sizes: |
1.00 (h) x 1.00 (w) x 1.00 (l) |
Cubic Feet: |
1.0 |
Returnable: |
Yes |
USPS First Class: |
Yes |
P65: |
Yes |
Truck Delivery: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.