Shop Weld Mount, mount without drilling holes. Weld Mount adhesive-bonded fasteners, cable tie mounts, and standoffs attach securely to your hull and surfaces with adhesive, no drilling, so you can route wiring and mount hardware cleanly without piercing the structure. Secure mounting without drilling Drilling holes to mount wiring and hardware means piercing the hull or structure, which you often want to avoid, and Weld Mount solves it. Weld Mount adhesive-bonded fasteners, cable tie mounts, standoffs, and studs bond to the surface with strong adhesive, holding securely without a single hole. That lets you route and secure wiring bundles, mount panels and components, and add hardware cleanly, with no drilling into the hull, tanks, or finished surfaces. For boaters and...
Acrylic Adhesive - 10-PackCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead...
Double ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22...
Double ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22...
Double ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22...
Double ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22...
Double ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22...
Double ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22...
Single ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22...
Single ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22...
Single ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22...
Single ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22...
Single ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22...
Single ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22...
Stud CoversFor applications such as engine rooms where our stainless steel studs may be visible, use these press-on white nylon caps to improve the appearance of the installation....
Floating Nut PlatesOur floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place...
Floating Nut PlatesOur floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place...
Aluminum Wire TieUsed with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine...
Aluminum Base Wire Tie MountThis tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount...
Aluminum Base Wire Tie MountThis tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount...
.75" Tall Stainless Standoff w/#10 x 24 Threads - Through-ThreadUnlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all...
.75" Tall Stainless Standoff w/5/16" x 8 Threads - Through-ThreadUnlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all...
1.5" Tall Stainless Stud w/5/16" x 18 ThreadThe HS200 stud is designed for heavy load applications such as mounting filters and panels. Thestud is inertial (friction) welded to...
2" Tall Stainless Stud w/3/8" x 16 ThreadThe HS200 stud is designed for heavy load applications such as mounting filters and panels. Thestud is inertial (friction) welded to...
2.5" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength...
Shop Weld Mount, mount without drilling holes. Weld Mount adhesive-bonded fasteners, cable tie mounts, and standoffs attach securely to your hull and surfaces with adhesive, no drilling, so you can route wiring and mount hardware cleanly without piercing the structure.
Drilling holes to mount wiring and hardware means piercing the hull or structure, which you often want to avoid, and Weld Mount solves it. Weld Mount adhesive-bonded fasteners, cable tie mounts, standoffs, and studs bond to the surface with strong adhesive, holding securely without a single hole. That lets you route and secure wiring bundles, mount panels and components, and add hardware cleanly, with no drilling into the hull, tanks, or finished surfaces. For boaters and installers rigging electrical, plumbing, and equipment, Weld Mount makes a tidy, secure installation possible where drilling is undesirable or impossible. It is a go-to for clean, no-hole mounting aboard.
Choosing the right product comes down to the job and the load. Match the mount type, cable tie mount for wiring bundles, standoff or stud for hardware and panels, to what you are securing. Use the recommended adhesive for the surface and a strong bond, and prepare the surface properly, since adhesive mounts rely on good prep to hold. Confirm the mount and adhesive suit the load and the surface material. Review the product details and the bonding instructions before use. With Weld Mount fasteners, you mount wiring and hardware securely and cleanly without drilling.
Weld Mount fasteners bond to the surface with a strong adhesive rather than screws or rivets, so they mount securely without drilling any holes. That lets you secure wiring and hardware without piercing the hull, tanks, or finished surfaces.
Drilling holes pierces the hull, tank, or finished surface, which can risk leaks, weaken structure, or mar the finish. Adhesive mounts avoid that, giving a clean, secure installation with no holes, which is ideal for wiring and hardware on a boat.
Yes, very much. Adhesive mounts rely on a good bond, so clean and prepare the surface properly per the instructions before bonding, and use the recommended adhesive for the surface. Good prep is the difference between a mount that holds and one that fails.
