Shop Weld Mount, mount without drilling holes. Weld Mount adhesive-bonded fasteners, cable tie mounts, and standoffs attach securely to your hull and surfaces with adhesive, no drilling, so you can route wiring and mount hardware cleanly without piercing the structure. Secure mounting without drilling Drilling holes to mount wiring and hardware means piercing the hull or structure, which you often want to avoid, and Weld Mount solves it. Weld Mount adhesive-bonded fasteners, cable tie mounts, standoffs, and studs bond to the surface with strong adhesive, holding securely without a single hole. That lets you route and secure wiring bundles, mount panels and components, and add hardware cleanly, with no drilling into the hull, tanks, or finished surfaces. For boaters and...
Executive Adhesive & Fastener Kit w/AT-8040 AdhesiveThis Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service...
AT-5 Large White Nylon Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with...
AT-3 Small White Nylon Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon...
Adhesively Bonded Fastener Kit with AT 8040 AdhesiveKit Contains: (1) Plano Storage Box - 11" x 7.25" x 2.75" (50) AT-5 Tie Mount (White) (1) AT-8040 Adhesive (5)...
Acrylic Adhesive - 10-PackCAN NOT SHIP AIR,UPS GROUND ONLYAT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without...
1.5" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength...
1" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength...
Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to...
Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for...
White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for...
White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's...
Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's...
AT-9500 Polybonder Cartridge - 50mlFeatures: Adhesively bonded fastening systems Plastic Bonder: PP, PE & PTFE 50ml MMA Acrylic Adhesive Made in the U.S.A. SKU: NVN-106701 MPN: AT-9500 UPC:...
AT-651 Mixing Tips for Use with AT-6031 Adhesive - Qty. 10Weld Mount’s AT-651 mixing tip is designed specifically for use with Weld Mount’s AT-6031 adhesive. AT-6031 is a...
AT-6031 Metal Bond AdhesiveAT-6031 is a 10-to-1 metal bonding adhesive. It has high viscosity (cures in 10–12 minutes), has a 6-minute working time, and develops working strength in...
Stainless Steel Heavy Stud 2" Base 3/8" x 16 Thread 2" Tall - 25-PackThe HS200 stud is designed for heavy-load applications such as mounting filters and panels. The...
SKU: NVN-3003358 MPN: AT-5-50 UPC:
SKU: NVN-3003356 MPN: AT-5B-50 UPC:
SKU: NVN-3003353 MPN: AT-3-50 UPC:
SKU: NVN-3002422 MPN: 102424100 UPC:
SKU: NVN-3002007 MPN: AT-8040 UPC:
SKU: NVN-3001828 MPN: AT-850-50 UPC:
SKU: NVN-3001826 MPN: AT-850-10 UPC:
SKU: NVN-3000422 MPN: AT-7-100 UPC:
Shop Weld Mount, mount without drilling holes. Weld Mount adhesive-bonded fasteners, cable tie mounts, and standoffs attach securely to your hull and surfaces with adhesive, no drilling, so you can route wiring and mount hardware cleanly without piercing the structure.
Drilling holes to mount wiring and hardware means piercing the hull or structure, which you often want to avoid, and Weld Mount solves it. Weld Mount adhesive-bonded fasteners, cable tie mounts, standoffs, and studs bond to the surface with strong adhesive, holding securely without a single hole. That lets you route and secure wiring bundles, mount panels and components, and add hardware cleanly, with no drilling into the hull, tanks, or finished surfaces. For boaters and installers rigging electrical, plumbing, and equipment, Weld Mount makes a tidy, secure installation possible where drilling is undesirable or impossible. It is a go-to for clean, no-hole mounting aboard.
Choosing the right product comes down to the job and the load. Match the mount type, cable tie mount for wiring bundles, standoff or stud for hardware and panels, to what you are securing. Use the recommended adhesive for the surface and a strong bond, and prepare the surface properly, since adhesive mounts rely on good prep to hold. Confirm the mount and adhesive suit the load and the surface material. Review the product details and the bonding instructions before use. With Weld Mount fasteners, you mount wiring and hardware securely and cleanly without drilling.
Weld Mount fasteners bond to the surface with a strong adhesive rather than screws or rivets, so they mount securely without drilling any holes. That lets you secure wiring and hardware without piercing the hull, tanks, or finished surfaces.
Drilling holes pierces the hull, tank, or finished surface, which can risk leaks, weaken structure, or mar the finish. Adhesive mounts avoid that, giving a clean, secure installation with no holes, which is ideal for wiring and hardware on a boat.
Yes, very much. Adhesive mounts rely on a good bond, so clean and prepare the surface properly per the instructions before bonding, and use the recommended adhesive for the surface. Good prep is the difference between a mount that holds and one that fails.
