NOV 19, 2026 14 min read

HOW TO CHOOSE A CHARTPLOTTER: SCREEN SIZE, CHARTS, SONAR, AND NETWORK

HOW TO CHOOSE A CHARTPLOTTER: SCREEN SIZE, CHARTS, SONAR, AND NETWORK

A chartplotter is a marine GPS display that shows your boat's live position on an electronic nautical chart. Most chartplotters sold today are also multifunction displays (MFDs), which means the same screen can run sonar, radar, AIS targets, autopilot control and engine data when you connect those sensors.

Here's how to choose a chartplotter in one line: pick the screen size from how far your eyes are from the dash, pick the brand from the charts and sensors you want, and pick the model from the ports on the back. Price comes last.

Most people do it the other way around. They buy the biggest screen the budget allows, then find out it won't run the radar they planned for next season, or that their old NMEA 0183 VHF has nowhere to plug in. This guide walks you through the five decisions in the order we make them at the counter, with real specs from Garmin, Simrad, Lowrance and Raymarine.

Chartplotter vs. MFD vs. fish finder combo

The names overlap, so get them straight before you shop.

Term What it means Example
Chartplotter GPS position on an electronic chart. Routes, waypoints, tracks. Raymarine Axiom 9 with no transducer connected
Fish finder / chartplotter combo Chartplotter with a sonar module built in. You add a transducer. Garmin ECHOMAP UHD2 95sv, Simrad NSX 3009
MFD (multifunction display) Chartplotter that networks with radar, sonar modules, cameras, autopilot, engines and other displays. Lowrance HDS PRO, Garmin GPSMAP, Simrad NSX, Raymarine Axiom

In practice, almost every fixed-mount unit from the big four is a combo or an MFD. The real question is how much it can talk to. That's decision four below, and it's the one people get wrong.

Step 1: Size the screen by eye distance, not boat length

Boat length tells you very little. A 22-foot bay boat with a leaning post puts your face 30 inches from the dash. A 34-foot express with a raised helm seat can put you farther back than that. Measure it.

Sit or stand where you actually drive. Have someone measure from the bridge of your nose to where the screen will sit. Then use this table as a starting point.

Eye-to-screen distance Chart only Chart plus sonar or radar split
About 24 in (tiller, small console) 5 to 7 in 7 to 9 in
About 30 in (typical center console) 7 to 9 in 9 to 12 in
About 36 to 42 in (walkaround, tower, raised helm) 9 to 10 in 12 in or larger
About 60 in (flybridge) 12 in or larger 16 in, or two 12 in displays

Our rule: if you'll run split screens most of the day, go up one size. A 9-inch screen split in half is two 4.5-inch-wide panes. That's small at 6 AM with spray on the glass.

Three more checks before you settle on a size:

  • Gloves and weather. Touchscreens work fine with a dry finger on flat water. With a wet glove in a chop, you'll miss. If you fish cold water or run offshore, look for a unit with physical keys or a remote keypad, or go up a size so the touch targets get bigger.
  • Polarized sunglasses. Wear the ones you actually use when you look at a display in the store. Simrad specs the NSX screen at more than 1,200 nits with 85° viewing angles on all four sides, and says it's built for viewing through polarized lenses (Simrad NSX specifications). Not every screen can say that.
  • Resolution goes up with size, and not always evenly. The base Raymarine Axiom 7 and Axiom 9 both run 800 x 480 pixels, while the Axiom 12 runs 1280 x 800 (Raymarine). The Simrad NSX 3009 runs 1280 x 720 on a 9-inch screen. Same size class, very different sharpness on chart text.

Step 2: Measure the dash before you fall in love with a model

The number on the box is the screen diagonal, not the unit. The housing is wider and taller, and the depth behind the panel is what kills most installs.

Real numbers from the spec sheets:

  • Simrad NSX 3012: 309.5 x 208.4 x 86.0 mm (12.19 x 8.20 x 3.38 in) without bracket, 2.2 kg (4.9 lb), compass-safe distance 50 cm (1.7 ft) (Simrad).
  • Garmin ECHOMAP UHD2 6/7/9 sv: Garmin calls for 118 mm (4-5/8 in) of clearance behind the chartplotter to the nearest obstruction (Garmin installation instructions).
  • Raymarine Axiom+ 7: 218 mm (8.58 in) deep including cables, flush or surface mounted (Raymarine).

That last one surprises people. Eight and a half inches of depth behind a dash panel is a lot on a small console. Get the paper template for the exact model, tape it to the dash, and look behind the panel for steering cables, wire bundles and the windshield frame before you cut anything.

If you're replacing an old unit, ask about adapter plates first. Raymarine sells an Axiom 9 adapter plate that uses the existing fixing holes from an older a9x cutout. Plates like that can save you a new dash panel.

Step 3: Choose your charts, because they choose your brand

Chart cards are not interchangeable across brands. This is the decision that locks you in, so make it on purpose.

Chart family Runs on What you get
Garmin Navionics+ / Garmin Navionics Vision+ Garmin only Navionics content in Garmin format, Auto Guidance+ routing, updates through the ActiveCaptain app. Vision+ adds relief shading, satellite imagery and 3D views.
Navionics+ / Navionics Platinum+ Raymarine, Simrad, Lowrance, B&G and other Navionics-compatible brands. Not Garmin. Coastal and inland charts covering 88,000+ lakes, SonarChart HD bathymetry, dock-to-dock route guidance. Platinum+ adds aerial photos and 3D view.
C-MAP DISCOVER / REVEAL (and X versions) Simrad, Lowrance, B&G. Raymarine Axiom runs C-MAP 4D. Vector charts with high-resolution bathymetry. REVEAL adds shaded relief. DISCOVER X and REVEAL X run on newer units such as the Simrad NSX.
Raymarine LightHouse Charts Raymarine only Raymarine's own vector charts for the LightHouse operating system.

Sources: Garmin Support (Navionics+ vs. Platinum+, and "Navionics+ and Navionics Platinum+ charts are not compatible with Garmin chartplotters"), Raymarine (supported chart vendors), Simrad (NSX supports C-MAP DISCOVER X and REVEAL X).

Our take:

  • Lakes and rivers, mostly freshwater fishing: Navionics or Garmin Navionics+ coverage of small inland lakes is hard to beat. Check your lake in the free Navionics web app before you buy.
  • Offshore bottom fishing: C-MAP REVEAL's shaded relief shows ledges and wrecks well. That points you toward Simrad or Lowrance.
  • Coastal cruising: any of the four will get you home. Pick the one whose routing and app you like using.

One limitation to know: most premium chart features, like daily updates and satellite overlays, need an active subscription after the first year. Budget for it, or plan to run on the last version you downloaded.

Step 4: Check the ports. This is where most mistakes happen.

Two units can look the same from the front and be completely different machines from the back. Before you buy, write down everything you own or plan to add in the next three years: radar, AIS, VHF, autopilot, trolling motor, engine data, cameras, a second display. Then check the ports.

NMEA 2000

Every unit in this guide has an NMEA 2000 port. That's how your chartplotter gets AIS targets, heading, engine data, and talks to the autopilot. If you're new to it, read our guide to building an NMEA 2000 network before you start pulling cable.

Ethernet (radar, sonar modules, second displays)

Radar and high-bandwidth sonar don't run over NMEA 2000. They need the brand's Ethernet network. This is the single biggest dividing line in chartplotters, and it's buried in the manuals.

Model family Radar support Network ports NMEA 0183
Garmin ECHOMAP UHD2 6/7/9 sv No NMEA 2000, plus a Garmin Marine Network port limited to compatible Panoptix, GCV and ECHOMAP devices No direct port
Garmin GPSMAP (xsv models) Yes, Garmin radar over Garmin Marine Network NMEA 2000, NMEA 0183, Garmin Marine Network Yes, on most models through the power/data cable
Simrad NSX 3007/3009/3012 Yes, HALO dome and open-array radars 1 Ethernet (5-pin), 1 NMEA 2000 Micro-C (1 LEN), Wi-Fi, Bluetooth No
Lowrance HDS PRO Yes, HALO dome and open-array radars 2 Ethernet (100 Mbit, up to 6 displays on one network), 1 NMEA 2000 Micro-C Yes, 1 port through the power connector
Raymarine Axiom / Axiom+ Yes, Quantum and other Raymarine radars RayNet Ethernet (10/100 Mbit/s), NMEA 2000 on the power cable Only through an optional converter (A80721)

Sources: Garmin ECHOMAP UHD2 owner's manual, Simrad NSX specifications, Lowrance HDS PRO specifications, Raymarine Axiom+ product overview.

Garmin puts it plainly in the ECHOMAP UHD2 manual: the network port "is not compatible with some Garmin Marine Network devices such as GPSMAP, GSD, radar devices, and networked Fusion stereos." If radar is anywhere in your future, an ECHOMAP is the wrong screen. Buy a GPSMAP now and save yourself the second purchase.

NMEA 0183 (older VHF radios and AIS)

Got a VHF radio from 2012 that only speaks NMEA 0183? Many new displays have no 0183 port. The Simrad NSX spec sheet lists "NMEA 0183: No." The Lowrance HDS PRO is an exception, with one 0183 port through the power connector (Lowrance). Raymarine says the Axiom, Axiom+, Axiom 2 Pro and Axiom 2 XL do not support direct NMEA 0183 connections (Raymarine). You'll need a gateway that converts 0183 to NMEA 2000, or a new radio. Price that in up front.

Step 5: Match the sonar to how you fish

If the chartplotter has built-in sonar, the transducer decides what you see. The display just shows it.

  • Traditional CHIRP: the classic fish arches and bottom. Every combo unit does this.
  • Down imaging and side imaging: photo-like views of structure under and beside the boat. Garmin calls them ClearVü and SideVü. Simrad and Lowrance use Active Imaging. Raymarine uses DownVision and SideVision.
  • Live forward-facing sonar: Garmin LiveScope, Lowrance ActiveTarget, Simrad ActiveTarget. These usually need a separate black box and an Ethernet port, which rules out some displays.

Real numbers: the Garmin ECHOMAP UHD2 sv units run 500 W RMS CHIRP, with ClearVü and SideVü CHIRP from 260 to 1,200 kHz, and Garmin rates them to 2,300 ft (701 m) at 77 kHz with the right transducer (Garmin). The Simrad NSX has one 9-pin sonar port for single-channel CHIRP, 50/200 kHz, HDI and Active Imaging (Simrad). The Raymarine Axiom+ RV models have a RealVision 3D module and a 600 W CHIRP module built in (Raymarine).

Buying the bundle with the transducer in the box is usually cheaper than buying them apart. But if your hull needs a thru-hull or in-hull transducer, the bundled transom mount won't help you. Our fish finder transducer guide covers that choice in detail.

Power draw: small, but count it

A chartplotter isn't a big load, but it runs all day. From the spec sheets:

Display Rated draw
Raymarine Axiom 7 / 9 / 12 7.34 W / 8.95 W / 18.96 W
Simrad NSX 3007 / 3009 / 3012 11.5 W / 18.8 W / 29.7 W max (830 / 1,360 / 2,150 mA at 13.8 V)
Lowrance HDS PRO 9 / 12 / 16 40 W / 47.7 W / 56.6 W max (2.9 / 3.6 / 4.1 A at 13.8 V)
Garmin ECHOMAP UHD2 6xsv 1.53 A typical, 3.2 A peak at 12 V

A 12-inch Simrad at its 2.15 A maximum over a 10-hour day is about 21.5 Ah. A 12-inch Lowrance HDS PRO at its 3.6 A maximum is about 36 Ah over the same day. That's real if you anchor with the engine off and the screen on. Wire it on its own fused circuit at the size the manual specifies (3 A for the NSX 3009 and 3012, 5 A for the HDS PRO 12), not spliced into the bilge pump feed.

Our short list by boat type

These are starting points, not the only right answers. All of them are things we sell and install.

Mistakes we see every season

  1. Buying an ECHOMAP and then a radar. It won't connect. Check the network port first.
  2. Mixing chart brands. A Navionics+ card won't run in a Garmin. A Garmin Navionics+ card won't run in a Simrad.
  3. Forgetting the old 0183 VHF. No port means a gateway or a new radio.
  4. Cutting the dash before checking depth. Template first, look behind the panel, then cut.
  5. Powering the NMEA 2000 backbone straight off the battery. Garmin warns that NMEA 2000 devices will drain the battery that way. Run the network power through the ignition or an in-line switch.

If you're not sure which display will talk to the gear already on your boat, send us a photo of the back of your current unit and a list of what's on board. We'll tell you what plugs in and what doesn't before you spend a dollar.

Frequently asked questions

What size chartplotter do I need?

Size it by the distance from your eyes to the screen, not boat length. At about 30 inches, typical on a center console, a 7 to 9-inch screen works for chart only, and 9 to 12 inches works if you run split screens with sonar or radar.

What's the difference between a chartplotter and an MFD?

A chartplotter shows your GPS position on an electronic chart. An MFD (multifunction display) is a chartplotter that also networks with radar, sonar, cameras, autopilot and engine data. Most fixed-mount chartplotters sold today are MFDs.

Can I use Navionics charts on a Garmin chartplotter?

Not standard Navionics+ or Platinum+ cards. Garmin says those are not compatible with Garmin chartplotters. Garmin units use Garmin Navionics+ or Garmin Navionics Vision+, which carry Navionics content in Garmin's format.

Can a Garmin ECHOMAP run radar?

No. Garmin's ECHOMAP UHD2 6/7/9 sv manual says its network port is not compatible with radar devices, GPSMAP units, GSD sonar modules or networked Fusion stereos. If you want radar, choose a Garmin GPSMAP or another brand's MFD with radar support.

Do new chartplotters have NMEA 0183 ports?

Many don't. The Simrad NSX has no NMEA 0183 port, and Raymarine Axiom, Axiom+, Axiom 2 Pro and Axiom 2 XL displays don't support direct NMEA 0183 connections. The Lowrance HDS PRO does have one 0183 port through its power connector. For displays without one, use an NMEA 0183 to NMEA 2000 gateway.

Is a touchscreen chartplotter good in rough water?

It works, but it's harder to hit the right spot with wet gloves in a chop. If you run in weather, pick a unit with physical keys, like the Lowrance HDS PRO's 8-way keypad, or a remote keypad, or go up one screen size so the touch targets are bigger.

How much power does a chartplotter draw?

Anywhere from under 1 amp to about 4 amps at 12 volts, depending on screen size and brand. Raymarine rates the Axiom 9 at 8.95 W, Simrad rates the 12-inch NSX 3012 at 29.7 W maximum (2,150 mA at 13.8 V), and Lowrance rates the HDS PRO 12 at 47.7 W maximum (3.6 A at 13.8 V).