Garmin Bail Mount w/Knobs f/echoMAP™ CHIRP 7Xdv & 9Xdv
It will be shipped by UPS Ground.
Shipping (3PM)
Within 30 days
Garmin Bail Mount w/Knobs f/echoMAP™ CHIRP 7Xdv & 9Xdv Product Description
Enhance your on-water experience with a reliable mounting solution designed specifically for serious anglers and boaters. This bail mount transforms your echoMAP CHIRP fishfinder into a stable, adjustable dashboard centerpiece, letting you focus on the fish rather than fiddling with your gear. Crafted for rugged marine environments, it combines straightforward setup with smart features that save time and reduce hassle during those long days on the water.
Standout Features for Everyday Boating Reliability
- Effortless Tilt Adjustment: Fine-tune the viewing angle to match your seating position, ensuring clear visibility of sonar readings and charts even in choppy conditions.
- Quick-Release Cable Management: Pre-connect your power, transducer, and networking cables directly to the mount. Snap your unit in or out in seconds without unplugging anything—perfect for trailering or securing gear at the dock.
- Secure Bail Design: The classic bail mechanism grips firmly, holding your device steady against vibrations from trolling motors or rough wakes.
- Sleek Black Finish: Blends seamlessly with most console designs while resisting corrosion from saltwater splashes and UV exposure.
Perfect Fit for Your echoMAP CHIRP Setup
Engineered exclusively for select echoMAP CHIRP models including the 72sv, 73sv, 74sv, 75sv, 92sv, 93sv, 94sv, and 95sv series. Before installing, double-check your fishfinder's model number to confirm compatibility—it's a straightforward match that ensures rock-solid performance without adapters or modifications.
Whether you're upgrading from a portable setup or replacing a worn-out bracket, this mount integrates flawlessly with your existing Garmin ecosystem, supporting seamless connectivity to transducers and other peripherals.
Simple Step-by-Step Installation for Any Boater
- Choose Your Spot: Select a flat console surface with enough clearance for tilt and cable routing. Measure to ensure it aligns with your eye level when seated.
- Prep the Surface: Clean thoroughly and use marine-grade sealant around screw holes to prevent water ingress.
- Mount the Base: Secure with included hardware—typically four screws for maximum hold on fiberglass or aluminum.
- Route and Connect Cables: Feed cords through the quick-disconnect port, then attach to your unit off-boat for testing.
- Snap and Adjust: Seat the device, tighten knobs, and tilt to perfection. Test on the water for any vibes.
Pro tip: On smaller boats, position it slightly offset to avoid knee bumps. Total install time? Under 30 minutes for most users.
Why Boaters Swear by This Bail Mount
Picture this: You're at the launch ramp, rushing to beat the crowd. No more wrestling with cables or loose brackets—this mount lets you detach your fishfinder in a flash, stowing it safely in a padded bag. On the water, the tilt keeps your eyes on prime targets without neck strain.
Durability shines through in real-world abuse: It withstands constant spray, temperature swings, and the occasional rod bump. Anglers report years of service with minimal wear, making it a smart long-term investment over flimsy alternatives.
Compared to flush mounts, the bail style offers superior versatility for multi-use boats—swap units seasonally or share with buddies without permanent changes.
Keep It Performing Like New: Quick Care Tips
- Rinse with fresh water after saltwater trips to flush salt buildup.
- Inspect knobs and bail for tightness monthly; lubricate pivot points with silicone spray if needed.
- Avoid harsh cleaners—mild soap and a soft cloth suffice for the finish.
- Store indoors during off-season to dodge extreme weather.
These habits extend usability, keeping your setup ready for the next big bite.
Frequently Asked Questions
Is this bail mount easy to install on most boats?
Yes, it installs in under 30 minutes with basic tools. Use the included hardware on flat surfaces like consoles or dashboards, and apply sealant for waterproofing.
Which echoMAP CHIRP models does it fit?
It's compatible with 72sv, 73sv, 74sv, 75sv, 92sv, 93sv, 94sv, and 95sv series. Verify your exact model for a perfect match.
Can I adjust the viewing angle?
Absolutely. The tilt mechanism allows precise adjustments via knobs, optimizing visibility from any seating position.
How does the quick cable disconnect work?
Connect all cables to the mount first. The cradle design lets you seat or unseat the unit instantly without touching wires—ideal for quick storage.
Is it built for saltwater use?
Yes, the corrosion-resistant black finish handles spray and humidity well. Rinse after use to maintain peak condition.
What's the advantage over flush mounting?
Bail mounts offer easy removal, angle flexibility, and no permanent holes—great for versatile boats or frequent travelers.
How durable is the bail mechanism?
Exceptionally tough against vibrations and impacts. Tighten knobs regularly, and it'll hold up through seasons of heavy use.
Garmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.
Garmin 101244532 Attributes
- Compatibility: Echomap CHIRP 72sv/73sv/ 74sv/75sv/92sv/93sv/94sv/95sv Fish Finders
- Arm Type: Bail Mount
- Color: Black
Garmin 101244532 Features & Benefits
- Surface Mount Your Compatible EchoMAP ™ Chartplotter/Sounder Combo Using Our Bail Mount With Knobs
- Mount Tilts For Optimum Viewing
- With The Mount's Quick Cable Disconnect Feature, You Can Plug The Necessary Cords Into The Mount, Allowing You To Seat/Unseat Your Device With Ease
- Compatible With EchoMAP ™ CHIRP 72sv, 73sv, 74sv, 75sv Fishfinder
- Limited 1 Year Warranty
Garmin 101244532 Warranties
Bail Mount with Knobs for echoMAP™ CHIRP 7Xdv & 9Xdv
Secure your echoMAP™ CHIRP device with Garmin's bail mount with knobs. It features tilt capabilities for optimum viewing. With the mount's quick cable disconnect feature, you can plug the necessary cords into the mount, allowing you to seat/unseat your device easily.
Mounting rings with knobs for echoMAP CHIRP 7Xdv and 9Xdv Use Garmin rings and knobs to secure your echoMAP CHIRP device. It has a tilt function to achieve the best viewing effect. ...
Frequently Asked Questions (FAQ) About Garmin Bail Mount w/Knobs f/echoMAP™ CHIRP 7Xdv & 9Xdv
Who is the Garmin?How to describe Garmin Bail Mount w/Knobs f/echoMAP™ CHIRP 7Xdv & 9Xdv?
What is the type of the product?
What's the color of Garmin Bail Mount w/Knobs f/echoMAP™ CHIRP 7Xdv & 9Xdv?
What is the compatibility of this product?
Who is the Garmin?
How to describe Garmin Bail Mount w/Knobs f/echoMAP™ CHIRP 7Xdv & 9Xdv?
What is the type of the product?
What's the color of Garmin Bail Mount w/Knobs f/echoMAP™ CHIRP 7Xdv & 9Xdv?
What is the compatibility of this product?
Save $13 when you buy the Garmin Bail Mount w/Knobs f/echoMAP™ CHIRP 7Xdv & 9Xdv for only $56 from NVN Marine! Same day shipping before 3pm.
Garmin Bail Mount w/Knobs f/echoMAP™ CHIRP 7Xdv & 9Xdv Technical Specifications
| Type: | |
|---|---|
| Vendor: |
Garmin |
| Type: |
Mounting Brackets |
Garmin Bail Mount w/Knobs f/echoMAP™ CHIRP 7Xdv & 9Xdv User Reviews
Garmin Bail Mount w/Knobs f/echoMAP™ CHIRP 7Xdv & 9Xdv Shipping & Return
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.