NMEA 2000 lets your marine electronics talk to each other. Build the network with a proper backbone, drops, terminators, and the gateways and sensors that tie it all together. Understanding NMEA 2000 networks NMEA 2000 is the standard that lets your chartplotter, engine, sensors, and autopilot share data on one network. This collection gathers the cables, tees, terminators, gateways, and sensors to build it right. A reliable network comes down to a properly built backbone, correct power and termination, and the gateways that bridge older gear. Build a proper backbone An NMEA 2000 network is a backbone with drop cables to each device, not a daisy chain. Run a continuous backbone with tees where devices connect. Keep drops within the...
NMEA 2000 1M Drop CableThis Digital Yacht cable is a 1m (3ft) NMEA 2000 drop cable made of metal connectors for maximum reliability. The drop cable allows users...
NjordLINK+ NMEA 2000 Cloud GatewayNjordLINK securely connects your boat’s NMEA 2000 network to the cloud for an exciting range of applications, real-time monitoring, historical data analysis and remote...
NavLINK Blue NMEA 2000 to Bluetooth GatewayFeatures: NMEA 2000 to Bluetooth Gateway bringing NMEA 2000 connectivity to BT sensors plus phones, tablets, and PCs DY SDK available for...
N2K Protect NMEA 2000 Network GuardWith more technically advanced, integrated, and “connected” boats, security becomes a major concern. Recent high-profile automotive hacks have highlighted security weaknesses in some...
GPS160 TriNav Sensor w/iKonvert NMEA 2000 Interface BundleThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.TriNav technology...
CO Alert Carbon Monoxide Alarm with NMEA 2000The lethal nature of CO means every boat should be protected with a local alarm. Of course, a typical household alarm...
BOATraNET - NMEA2000 Version - Navionics US Silver ChartsBOATraNET is a truly unique and innovative product that "e-nables" your existing navigation system and creates a dynamic, local intranet...
NMEA2000 is becoming more and more popular on new boats and nearly all new chart plotters have an NMEA2000 interface, with some models only providing an NMEA2000 interface....
TS4 - Full Follow-Up Remote with Auto Function N2K with 6M CableComNav's full follow-up remote with auto function. NMEA 2000, 6 meter cable, for use with P4 Autopilot. ...
NF4 - Non Follow-Up Remote with Auto Function N2K with 6M CableFeatures: NF4, Non Follow-Up Remote with Auto function N2K 6M Cable Flush Mount Only At HIGHBORN INC....
G2 Satellite Compass - NMEA 2000 with 6M CableAccurate Heading & Precise Position for ProfessionalsFeatures: Supports both GPS and GLONASS satellites for complete redundancy Heading accuracy < 0.25°...
G1 Satellite Compass - NMEA 2000 with 6M CableAccurate Heading, Position & Rate of TurnFeatures: Supports both GPS and GLONASS satellites for complete redundancy Heading accuracy < 0.25°...
Easy NavtexEasy to read. This new navtex receiver features big, bold characters and intuitive message formatting.Easy to program. Simple menus let you select which stations and which message...
NMEA 2000 T-ConnectorOur NMEA 2000 T-Connector makes it easy to expand your marine electronics network by providing secure connection points between backbone cables and connected devices. Built to...
NMEA 2000 Right Angle Cable - 2 MeterThe NMEA 2000 right-angle drop cable is designed to save space and simplify installations in tight or crowded areas. With a...
NMEA 2000 Right Angle AdapterThe NMEA 2000 right-angle adapter is a compact solution for tight installations where standard straight connectors won’t fit. With a 90-degree design, it reduces...
NMEA 2000 Power IsolatorThe NMEA 2000 power isolator is designed to safely separate power between two segments of an NMEA 2000 network while still allowing data to pass...
NMEA 2000 Non-Fused Power Cable - 2 MeterThis NMEA 2000 power cable (no fuse) is designed to deliver clean, reliable power to your NMEA 2000 network. Featuring a...
NMEA 2000 Male Terminator - 120 ohmNMEA 2000 terminators are essential components for completing and stabilizing your marine electronics network. Installed at each end of the backbone, these...
NMEA 2000 Female Terminator - 120 ohmNMEA 2000 terminators are essential components for completing and stabilizing your marine electronics network. Installed at each end of the backbone, these...
NMEA 2000 Drop Cable - 5 MeterThis NMEA 2000 5-pin drop cable is built for seamless integration between your network backbone and connected marine electronics. Designed with durable,...
NMEA 2000 Drop Cable - 4 MeterThis NMEA 2000 5-pin drop cable is built for seamless integration between your network backbone and connected marine electronics. Designed with durable,...
NMEA 2000 Drop Cable - 3 MeterThis NMEA 2000 5-pin drop cable is built for seamless integration between your network backbone and connected marine electronics. Designed with durable,...
NMEA 2000 Drop Cable - 2 MeterThis NMEA 2000 5-pin drop cable is built for seamless integration between your network backbone and connected marine electronics. Designed with durable,...
NMEA 2000 lets your marine electronics talk to each other. Build the network with a proper backbone, drops, terminators, and the gateways and sensors that tie it all together.
NMEA 2000 is the standard that lets your chartplotter, engine, sensors, and autopilot share data on one network. This collection gathers the cables, tees, terminators, gateways, and sensors to build it right. A reliable network comes down to a properly built backbone, correct power and termination, and the gateways that bridge older gear.
An NMEA 2000 network is a backbone with drop cables to each device, not a daisy chain. Run a continuous backbone with tees where devices connect. Keep drops within the length limit and terminate both ends with a terminating resistor. A network missing a terminator or built as a chain is the most common reason data drops out, so follow the topology rules.
The backbone needs a single power connection from a switched 12 volt source through a power tee. Place the power tee near the middle of the backbone for balanced supply. Size the power tap for the number of devices, since too many loads on an underpowered network causes errors. One power point, correctly placed, keeps voltage even across the bus.
Use micro and mid cables in the right lengths, tees to branch off to each device, and the correct male and female terminators at the ends. Measure your runs and buy a little slack. Keep spare tees so adding a device later is a plug in, not a rewire. Quality cabling keeps the network solid in a wet, vibrating boat.
If you have legacy NMEA 0183 gear, a gateway or multiplexer translates between 0183 and NMEA 2000 so the old and new electronics share data. Engine gateways bring analog engine data onto the network. Wi Fi gateways push data to a tablet or phone. Pick the gateway for what you are connecting.
Once the backbone is in, you can add GPS, heading, wind, depth, tank, and engine sensors, plus displays that read it all. Plan for expansion by leaving spare tees, so the next sensor plugs in cleanly. Not sure how to build or expand your network. Tell our techs your electronics and what you want to connect, and we will match the backbone cables, tees, terminators, power tap, and gateways so everything talks reliably.
It is a backbone with drop cables to each device, not a daisy chain. Run a continuous backbone, branch to devices with tees, keep drops within the length limit, and terminate both ends with resistors. Missing a terminator is the top cause of dropouts.
The backbone needs one power connection from a switched 12 volt source through a power tee, placed near the middle of the backbone for balanced supply. Size the tap to the number of devices so voltage stays even across the bus.
Micro and mid backbone and drop cables in the right lengths, tees to branch to each device, and correct male and female terminators at the ends. Measure your runs, buy a little slack, and keep spare tees for future devices.
Yes, with a gateway or multiplexer that translates between NMEA 0183 and NMEA 2000 so old and new electronics share data. Engine and Wi Fi gateways bring analog engine data or phone connectivity onto the network.
Leave spare tees on the backbone so adding a sensor or display is a plug in rather than a rewire. As long as you stay within the backbone and drop length limits and keep it terminated, you can keep adding devices.
Backbone length and drop cable length have maximum limits based on cable type. Micro cable supports shorter runs than mid cable. Always check the specifications for your chosen cable size before installation.
