YakGear Anglers Crate Kit Basic V2 | Kayak Fishing
YakGear Anglers Crate Kit Basic V2 | Kayak Fishing — Product description
The YakGear Anglers Crate Kit Basic V2 gives you a ready-to-fish setup for the back of your kayak in one box. You get a 13 by 13 inch crate, a Build-A-Crate double rod holder, an accessory pouch, a 1.5 pound grapnel anchor kit, and two utility leashes. Rig it once and you're on the water.
If you fish out of a sit-on-top kayak, you already know the back tank well is where your day gets organized or falls apart. The YakGear Anglers Crate Kit Basic V2 is built to sort that out in one box. It's a 13 by 13 inch black plastic crate that drops into most standard tank wells, and it shows up pre-loaded with the gear that actually matters on the water: a double rod holder, an accessory pouch, a 1.5 pound grapnel anchor kit, and two utility leashes. Rig it once and you've got a fishing platform that travels with you from launch to launch.
The heart of the kit is the crate itself paired with the Build-A-Crate Double Rod Holder. That holder mounts to the crate wall and keeps two rods angled up and out of your way while you paddle or pedal to the next spot. When a fish hits, your rods are right there, not rolling around in the hull. The crate walls are open lattice, so anything that needs to drain, drains, and you can add more Build-A-Crate parts down the road as your setup grows.
The 1.5 pound folding grapnel anchor is the piece that lets you actually hold a spot. The flukes fold flat for storage and open up to grab the bottom when you drop it. In mud or sand it digs in and holds well for a light kayak. Over rock it tends to skip, so pick your anchoring spots with that in mind. Give it at least a 3 to 1 scope, meaning three feet of line for every foot of water depth, and it'll set far better than a straight-down drop. The kit comes with anchor line, and a lot of anglers eventually upgrade to a 1/4 inch braided line for longer life in the sun.
The YakGear Accessory Pouch tucks your pliers, leader spools, hooks, and the small stuff you're always digging for into one spot on the crate. It fills up fast once you start loading it, so a lot of folks pair it with a separate dry bag for anything that truly can't get wet. The two utility leashes clip your paddle, a rod, or a fish grip to the boat so a flipped kayak doesn't cost you gear. Route them separately from your anchor line and they won't tangle when things get busy.
Install is about as simple as it gets. The crate sets into your tank well and the included straps snug it down. On most sit-on-tops that's all you need. If you run big water or fish in chop, adding a couple of your own bungees over the top is cheap insurance against the crate shifting. It fits best on 10 to 12 foot fishing kayaks with a standard rear well. On very low-profile sit-inside boats the crate can sit a little tall, and you'd want a riser or a low-profile setup instead.
We'll be straight with you about the plastic. It's a light-duty crate, not a sealed dry box. Loaded heavy and bounced around season after season, the corner mounts can eventually stress and crack, so don't treat it like a step stool or overload it past what a kayak should carry anyway. Used for what it is, a rigging base for rods, tackle, and a light anchor, it does the job and keeps your deck clean.
Who's this for? The angler who's tired of loose gear sliding around the tank well and wants one purchase that covers rod storage, anchoring, tackle, and leashes without hunting down four separate products. First kayak or fifth, the Basic V2 kit gets you rigged and fishing without a garage full of parts. And because it's all YakGear, the Build-A-Crate parts you add later drop right in.
Key Features
- 13 by 13 inch black plastic crate drops into most standard kayak tank wells
- Build-A-Crate Double Rod Holder keeps two rods angled up and out of your way
- 1.5 pound folding grapnel anchor kit holds a light kayak in mud or sand
- YakGear Accessory Pouch organizes pliers, leaders, and terminal tackle on the crate wall
- Two utility leashes clip paddle, rods, or tools to the boat so a flip doesn't cost gear
- Open-lattice crate walls drain water and accept additional Build-A-Crate accessories
- Includes mounting straps for a quick tank-well install with no drilling
Why Buy from NVN Marine
- Authorized YakGear reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | YakGear Anglers Crate Kit Basic V2 |
|---|---|
| Brand | YakGear |
| Manufacturer Part Number | 01-0006-01 |
| UPC | 850020214099 |
| Crate Dimensions | 13 in x 13 in |
| Color | Black |
| Material | Plastic |
| Kit Type | Basic Angler Kit (V2) |
| Rod Holder | Build-A-Crate Double Rod Holder |
| Accessory Pouch | Included (YakGear) |
| Anchor | 1.5 lb Grapnel Anchor Kit |
| Utility Leashes | Two |
| Mounting | Tank-well straps included |
| Logo | YakGear |
Frequently asked questions
What's included in the Anglers Crate Kit Basic V2?
You get the 13 by 13 inch black plastic crate, a Build-A-Crate double rod holder, a YakGear accessory pouch, a 1.5 pound grapnel anchor kit with line, and two utility leashes. It's one box that covers rod storage, anchoring, tackle, and gear tethering.
Will it fit my kayak?
It fits most sit-on-top fishing kayaks with a standard rear tank well and works best on 10 to 12 foot boats. On very low-profile sit-inside kayaks the crate can sit a little tall, so you'd want a riser or a lower-profile setup instead.
How many rods does it hold?
The included Build-A-Crate double rod holder carries two rods. Because it's part of the Build-A-Crate system, you can add more holders to the crate later as your rig grows.
Does the 1.5 pound anchor actually hold a kayak?
Yes, for a light kayak in mud or sand it digs in and holds well. Over rocky bottoms it tends to skip. Use at least a 3 to 1 scope, three feet of line for every foot of depth, and it sets much better than dropping straight down.
What anchor line should I use?
The kit ships with anchor line that gets you fishing right away. Many anglers eventually move up to a 1/4 inch braided line, which lasts longer in the sun and handles cleaner on the reel.
Is the accessory pouch waterproof?
It's a water-resistant organizer for pliers, leaders, and terminal tackle, not a sealed dry bag. Pair it with a separate dry bag for a phone, keys, or anything that truly can't get wet.
Do I need to drill my kayak to mount it?
No. The crate sets into the tank well and the included straps snug it down, so there's no drilling. If you fish in chop, adding a couple of your own bungees over the top keeps it from shifting.
Can I expand the kit later?
Yes. The crate uses the Build-A-Crate system, so you can add more rod holders and accessories over time. The parts you buy later drop right into the same crate.
Will the rod holder loosen over time?
After repeated removal the mounting hardware can back off a little. A small dab of thread locker on the screws keeps everything tight through a season of fishing.
