{"product_id":"whale-wx1515b-1-2-bsp-x-15mm-quick-connect-adapter","title":"Whale WX1515B 1\/2\" BSP x 15mm Quick Connect Adapter","description":"\u003cp class=\"nvn-hero\"\u003eThe Whale WX1515B taptail adapter joins a 1\/2 inch BSP male thread to Whale's 15mm Quick Connect push-fit system. Thread it onto a tap, pump, or appliance port, push 15mm tube into the other end, and you have got a tool-free freshwater joint. White glass-filled polypropylene with an O-ring seal, sold as a single fitting.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Whale WX1515B is a taptail adapter that bridges two different plumbing worlds on your boat. On one end it's a 1\/2 inch BSP male thread, the kind you will find on taps, faucet tails, water heater ports, and plenty of pump and accumulator fittings. On the other end it's a 15mm Quick Connect socket, part of Whale's push-fit freshwater system. Thread it onto the BSP side, push your 15mm tube into the other side, and you've tied a threaded component into a tool-free plumbing run.\u003c\/p\u003e\n\u003cp\u003eThat's the whole appeal of Whale Quick Connect. No clamps, no crimping, no hose barbs to wrestle a stiff tube over. You cut the 15mm tube square, push it home until it seats, and the internal collet grips and seals it. Need to move a line or service a pump? Press the collar and the tube pulls straight back out. The fitting is demountable, so the same adapter can come apart and go back together as your system changes.\u003c\/p\u003e\n\u003cp\u003eWhere does a taptail adapter actually earn its keep? Think about any spot where a threaded port meets flexible tube. A galley or head tap with a 1\/2 inch BSP tail. An inline water heater with threaded inlets and outlets. A freshwater pump or accumulator tank with BSP ports. Instead of hunting for the right barb and a hose clamp, you screw the WX1515B onto the thread and run 15mm Quick Connect tube to it. It keeps a mixed system tidy and makes future changes painless.\u003c\/p\u003e\n\u003cp\u003eThe body is white glass-filled polypropylene. The glass fill stiffens the plastic so the threads hold their shape and the fitting takes the handling that comes with a working bilge or a cramped locker. It won't corrode the way a metal fitting can in a damp, salty space, and it stays light. An O-ring sits on the BSP running thread to seal the connection, so you get a clean seal without having to pile on thread tape or sealant to chase a drip.\u003c\/p\u003e\n\u003cp\u003eA quick word on BSP, because it trips people up. BSP stands for British Standard Pipe, and it's a different thread form than the NPT threads common on a lot of North American gear. The WX1515B is cut to 1\/2 inch BSP male, so it mates with a 1\/2 inch BSP female port. If the component you're connecting to is BSP, this is a straight thread-on. If you're not sure what thread your tap or appliance uses, check before you buy, because BSP and NPT look similar but don't seal properly together.\u003c\/p\u003e\n\u003cp\u003eInstall is about as simple as plumbing gets. Hand-tighten the BSP thread onto the port, snug it with a light turn of a wrench if you need to, and don't overdo it, because the O-ring is doing the sealing work, not brute torque. On the Quick Connect side, make sure your tube end is cut clean and square so it seats fully past the collet. A tube cut at an angle or with a burr is the usual culprit behind a weep on a push-fit joint. Push it in until it stops, give it a gentle tug to confirm it's locked, and you're done.\u003c\/p\u003e\n\u003cp\u003eThis is a single adapter, sold one to a pack. It's one piece of the larger Whale 15mm Quick Connect range, which includes straight connectors, tees, elbows, and stem adapters in the same push-fit standard. If you're already running Whale 15mm tube, this taptail drops right in. If you're starting fresh, it's an easy way to bring your taps and threaded appliances onto the same tool-free system as the rest of your freshwater plumbing.\u003c\/p\u003e\n\u003cp\u003eKeep in mind what it's built for. This is a freshwater fitting for potable and general freshwater lines, not a fuel or high-pressure hydraulic part. Match it to 15mm Whale tube on the push-fit side and a 1\/2 inch BSP female thread on the other, and it'll give you a quick, clean, serviceable joint for years.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e1\/2 inch BSP male thread on the inlet, so it threads straight onto a 1\/2 inch BSP female tap tail, pump port, or appliance fitting\u003c\/li\u003e\n  \u003cli\u003e15mm Quick Connect female socket on the outlet, for push-fit connection to Whale 15mm freshwater tube\u003c\/li\u003e\n  \u003cli\u003ePush-fit connection grips and seals the tube with an internal collet, no clamps, crimping, or tools needed\u003c\/li\u003e\n  \u003cli\u003eDemountable design lets you press the collar and pull the tube back out to reroute or service the line\u003c\/li\u003e\n  \u003cli\u003eWhite glass-filled polypropylene body stiffens the threads and shrugs off the damp, salty air of a bilge or locker\u003c\/li\u003e\n  \u003cli\u003eO-ring pre-fitted on the BSP running thread seals the joint without piling on thread tape or sealant\u003c\/li\u003e\n  \u003cli\u003ePart of the Whale 15mm Quick Connect range, so it mixes with the same straight connectors, tees, and elbows\u003c\/li\u003e\n  \u003cli\u003eSingle adapter per pack, sized for 1\/2 inch BSP male to 15mm Quick Connect freshwater runs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Whale Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the Whale WX1515B adapter do?\u003c\/summary\u003e\n    \u003cp\u003eIt bridges a 1\/2 inch BSP male thread and Whale's 15mm Quick Connect push-fit system. Thread it onto a BSP female port, then push 15mm tube into the other side to tie a threaded tap, pump, or appliance into a tool-free plumbing run.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size tube does it accept?\u003c\/summary\u003e\n    \u003cp\u003eIt takes Whale 15mm Quick Connect tube on the push-fit side. Cut the tube square, push it in until it seats, and the internal collet grips and seals it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat thread is on the other end?\u003c\/summary\u003e\n    \u003cp\u003eA 1\/2 inch BSP male thread. It mates with a 1\/2 inch BSP female port, which is common on taps, water heaters, pumps, and accumulator tanks.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need clamps or tools to connect it?\u003c\/summary\u003e\n    \u003cp\u003eNo. The 15mm side is push-fit, so there are no clamps to tighten or barbs to force a tube over. On the thread side you just hand-tighten and snug it lightly.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is it made of?\u003c\/summary\u003e\n    \u003cp\u003eWhite glass-filled polypropylene. The glass fill stiffens the plastic so the threads hold their shape, and it will not corrode in a damp, salty space the way a metal fitting can.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with an O-ring?\u003c\/summary\u003e\n    \u003cp\u003eYes. An O-ring is fitted on the BSP running thread to seal the connection, so you get a clean seal without having to chase a drip with extra thread tape.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I disconnect and reuse it?\u003c\/summary\u003e\n    \u003cp\u003eYes. The Quick Connect joint is demountable. Press the collar and the tube pulls straight back out, then pushes back in when you are ready. That makes rerouting or servicing a line easy.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this only for freshwater?\u003c\/summary\u003e\n    \u003cp\u003eYes. It is a freshwater fitting for potable and general freshwater lines. It is not a fuel or high-pressure hydraulic part.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does BSP mean?\u003c\/summary\u003e\n    \u003cp\u003eBSP stands for British Standard Pipe, a thread form that differs from the NPT threads common on a lot of North American gear. This adapter is 1\/2 inch BSP male, so confirm your port is BSP before connecting.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many adapters come in a pack?\u003c\/summary\u003e\n    \u003cp\u003eOne. The WX1515B is sold as a single adapter.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eWhale WX1515B Taptail Adapter, 1\/2\" BSP Male x 15mm Quick Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eWhale Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eWhale Pumps\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eWX1515B\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e766478151575\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFitting Type\u003c\/th\u003e\n\u003ctd\u003eTap Tail Adapter (Male)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eThread Size\u003c\/th\u003e\n\u003ctd\u003e1\/2 Inch BSP Male\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnection Type\u003c\/th\u003e\n\u003ctd\u003e15 Millimeter Quick Connect (Female)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass Filled Polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeal\u003c\/th\u003e\n\u003ctd\u003eO-Ring (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003ctd\u003eWhale 15mm Quick Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePackage Quantity\u003c\/th\u003e\n\u003ctd\u003e1 (Single)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the Whale WX1515B adapter do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It bridges a 1\/2 inch BSP male thread and Whale's 15mm Quick Connect push-fit system. Thread it onto a BSP female port, then push 15mm tube into the other side to tie a threaded tap, pump, or appliance into a tool-free plumbing run.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size tube does it accept?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It takes Whale 15mm Quick Connect tube on the push-fit side. Cut the tube square, push it in until it seats, and the internal collet grips and seals it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What thread is on the other end?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A 1\/2 inch BSP male thread. It mates with a 1\/2 inch BSP female port, which is common on taps, water heaters, pumps, and accumulator tanks.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need clamps or tools to connect it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The 15mm side is push-fit, so there are no clamps to tighten or barbs to force a tube over. On the thread side you just hand-tighten and snug it lightly.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is it made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"White glass-filled polypropylene. The glass fill stiffens the plastic so the threads hold their shape, and it will not corrode in a damp, salty space the way a metal fitting can.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with an O-ring?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. An O-ring is fitted on the BSP running thread to seal the connection, so you get a clean seal without having to chase a drip with extra thread tape.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I disconnect and reuse it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The Quick Connect joint is demountable. Press the collar and the tube pulls straight back out, then pushes back in when you are ready. That makes rerouting or servicing a line easy.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this only for freshwater?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It is a freshwater fitting for potable and general freshwater lines. It is not a fuel or high-pressure hydraulic part.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does BSP mean?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"BSP stands for British Standard Pipe, a thread form that differs from the NPT threads common on a lot of North American gear. This adapter is 1\/2 inch BSP male, so confirm your port is BSP before connecting.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many adapters come in a pack?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"One. The WX1515B is sold as a single adapter.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Whale Marine","offers":[{"title":"Default Title","offer_id":67599080325213,"sku":"2011139","price":8.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_2c318d08-8964-4af6-b52b-540dafd52dde.png?v=1790960193","url":"https:\/\/nvnmarine.com\/products\/whale-wx1515b-1-2-bsp-x-15mm-quick-connect-adapter","provider":"NVN Marine","version":"1.0","type":"link"}