Weld Mount AT-5 Large White Nylon Wire Tie Mount, 500 Pack
Weld Mount AT-5 Large White Nylon Wire Tie Mount, 500 Pack — Product description
The Weld Mount AT-5 gives you a clean, screw-free way to anchor wire ties anywhere in the hull. This 500-pack of large white nylon tie mounts bonds into wet resin during layup or sticks down with acrylic adhesive later. Each one takes a #5 tie and pulls to an average 150 lbs, and they're approved for submerged bilge use.
If you've ever wired a boat, you know the old trick. Glass or glue a scrap of plywood into the hull just so you've got something to drive a tie-mount screw into. It's messy, it adds weight, and it eats up labor. The Weld Mount AT-5 kills that step entirely.
These large white nylon mounts set right into wet resin during the hull layup, or you bond them down later with Weld Mount acrylic adhesive. No screws, no drilling, no backing block. Each mount takes a #5 wire tie and holds an average pull strength of 150 lbs, so your looms stay put through years of pounding and vibration.
They're approved for submerged bilge applications too, which matters when you're routing bilge pump and float switch wiring down low. This is the 500-count case in white, so you've got plenty on hand for a full rig-out. Need black instead? The AT-5 comes that way as well.
Key Features
- 150 lb average pull strength holds wire looms tight through vibration and pounding
- Accepts a #5 wire tie for medium to large bundle diameters
- Bonds into wet resin during layup or sticks down later with acrylic adhesive, no screws or drilling
- Approved for submerged bilge applications, safe for low bilge pump and float switch runs
- 500-count case of large white nylon mounts for a full boat rig-out
Why Buy from NVN Marine
- Authorized Weld Mount Systems reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Weld Mount AT-5 Wire Tie Mount, Large White 500 Pack AT-5-500 |
|---|---|
| Brand | Weld Mount Systems |
| Manufacturer Part Number | AT-5-500 |
| UPC | 723022001755 |
| Manufacturer Model | 805500 |
| Color | White |
| Material | Nylon |
| Wire Tie Size | #5 |
| Average Pull Strength | 150 lbs |
| Bilge Rating | Approved for submerged bilge applications |
| Installation Method | Set into wet resin or bonded with acrylic adhesive |
| Pack Quantity | 500 |
Frequently asked questions
How do I install the AT-5 tie mount?
You've got two options. Set it into wet resin while you're laying up the hull, or bond it to a cured surface later with Weld Mount acrylic adhesive. Either way there's no screw and no drilling into the laminate.
What size wire tie does the AT-5 take?
It's built for a #5 wire tie, which covers medium to large wire bundles. Run your loom, cinch the tie through the mount, and you're done.
How much will one mount hold?
Each AT-5 has an average pull strength of 150 lbs, so a run of them keeps heavy wiring harnesses anchored even with constant vibration underway.
Can I use these in the bilge?
Yes. The AT-5 is approved for submerged bilge applications, so it's fine for bilge pump and float switch wiring that spends time underwater.
How many mounts come in this pack?
This is the 500-count case in white. That's enough to wire out a full boat, and the AT-5 is also available in black if you need it.
