Weld Mount AT-2010 Acrylic Adhesive, 50ml Cartridge
Weld Mount AT-2010 Acrylic Adhesive, 50ml Cartridge — Product description
The Weld Mount AT-2010 is a high-viscosity acrylic adhesive built for fast, high-strength bonds on the boat. One 50ml cartridge bonds 150 to 200 parts, cures in 5 to 6 minutes, and holds smaller parts without sagging. It's Weld Mount's best seller for good reason.
The Weld Mount AT-2010 is the acrylic adhesive we reach for when we need a fast, high-strength bond without dragging out a welder or a drill. It's Weld Mount's biggest seller, and it's easy to see why. The high-viscosity formula holds smaller parts without sagging, so you can bond a cable clamp or a wire-tie mount to a vertical bulkhead and it stays put while the adhesive kicks.
You get about a 4-minute working time to position the part, then it cures in 5 to 6 minutes and reaches working strength in 15 to 20. That's quick enough to keep a rigging job moving. Heavier parts may want a couple of AT-690 fixture dots to hold them in place while it sets.
One 50ml cartridge bonds 150 to 200 parts and mixes by hand or through an AT-300 gun with mixing tips. Store it around 72 degrees and it'll keep for six months, longer if you refrigerate it.
Key Features
- High-viscosity acrylic formula holds smaller parts without sagging, so vertical and overhead bonds stay put while the adhesive kicks
- Cures in 5 to 6 minutes with a 4-minute working time, giving you room to position the part and a fast set so you're not standing around
- Reaches working strength in 15 to 20 minutes for an immediate high-strength bond
- 50ml cartridge bonds 150 to 200 parts, mixed by hand or with the AT-300 gun and mixing tips
- 6-month shelf life stored at 72 degrees, and refrigeration extends it
Why Buy from NVN Marine
- Authorized Weld Mount Systems reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Weld Mount AT-2010 Acrylic Adhesive 50ml |
|---|---|
| Brand | Weld Mount Systems |
| Manufacturer Part Number | AT-2010 |
| UPC | 723022001885 |
| Weight | 0.5 lb |
| Cartridge Volume | 50ml |
| Working Time | 4 minutes |
| Cure Time | 5 to 6 minutes |
| Working Strength | 15 to 20 minutes |
| Coverage | Bonds 150 to 200 parts per cartridge |
| Viscosity | High |
| Shelf Life | 6 months stored at 72 degrees |
Frequently asked questions
How long does the AT-2010 take to cure?
It has about a 4-minute working time, cures in 5 to 6 minutes, and develops working strength in 15 to 20 minutes.
How many parts will one cartridge bond?
A single 50ml cartridge bonds roughly 150 to 200 parts.
Do I need a special gun to apply it?
No. You can mix it by hand, or use the Weld Mount AT-300 gun with mixing tips for faster, cleaner dispensing.
What if the part is heavy and wants to sag?
The high-viscosity formula holds smaller parts on its own. For heavier parts, use AT-690 fixture dots to hold them in place while the adhesive kicks.
How should I store it?
It has a 6-month shelf life stored at 72 degrees. Refrigerate it where possible to extend the life.
