Weld Mount 1" Stainless Stud, 1/4-20 Thread, 10 Pack
Weld Mount 1" Stainless Stud, 1/4-20 Thread, 10 Pack — Product description
Weld Mount's 1-inch stainless studs give you a clean 1/4-20 threaded mount without drilling a single hole. This 10-pack bonds flat to fiberglass, metal, or wood, so you can hang wire looms, terminal blocks, and small gear right where you need them.
If you've ever hated the idea of drilling into a nice fiberglass bulkhead just to run a wire loom, these Weld Mount studs are the fix. Each one is a stainless steel post with a 1/4-20 thread on top and a 1.25-inch base that bonds flat to the surface. No holes. No backing plates. You bond the base down, let it cure, and you're set with a solid threaded anchor point.
At 1 inch tall, this size clears most cable clamps, wire loom saddles, and small electrical panels with room for a washer and nut. Boaters use them for all sorts of jobs. Routing battery cables, mounting terminal blocks, holding down bilge hoses, tidying up the mess behind the helm. They're stainless, so they hold up fine in a wet, salty engine space.
You get 10 studs in a pack, which is usually enough to rig a full run and still keep a couple spare. Bond them in place with Weld Mount adhesive, sold separately.
Key Features
- 1/4-20 stainless thread gives you a standard mounting point for clamps, saddles, and terminal blocks
- 1.00-inch height clears most cable clamps and wire loom saddles with room for a washer and nut
- 1.25-inch bonding base mounts flat to fiberglass, metal, or wood with no drilling and no holes
- Stainless steel construction holds up in wet, salty engine and bilge spaces
- 10 studs per pack, enough to finish a full wiring run with a couple to spare
Why Buy from NVN Marine
- Authorized Weld Mount Systems reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Weld Mount 1.00in Tall 1/4 x 20 ST125-1420-16SS SS Stud 1.25in Base 10 Pack |
|---|---|
| Brand | Weld Mount Systems |
| Manufacturer Part Number | ST125-1420-16SS-10 |
| UPC | 650361940004 |
| Thread Size | 1/4"-20 |
| Stud Height | 1.00 in |
| Base Diameter | 1.25 in |
| Material | Stainless Steel |
| Quantity per Pack | 10 |
| Category | Electrical |
Frequently asked questions
Do I have to drill holes to install these?
No, that's the whole point. The 1.25-inch base bonds flat to the surface with Weld Mount adhesive, so you get a threaded mounting point without drilling into your hull or bulkhead.
What thread size are these studs?
They're 1/4-20, a standard coarse thread. Any 1/4-20 nut, washer, or cable clamp threads right on.
How tall are they?
Each stud stands 1 inch tall from the base, which clears most wire loom saddles and cable clamps with room for a washer and nut on top.
How many come in a pack?
Ten studs per pack. That's usually enough for a full wiring run with a couple to spare.
What are they made of?
Stainless steel, so they stand up to the wet, salty conditions inside an engine compartment or bilge.
