Victron Energy

Victron Lithium SuperPack NG 24V/100Ah LiFePO4 Battery

SKU: 112889 · UPC: 8719076073765 · MPN: BAT524110740
★★★★★ 4.7 · 0 reviews
Authorized dealer Free Shipping
$1,785.00
or 4 payments of $446.25 with Affirm · See disclosures
Low stock — 2 left — Ships today Pickup Next-Day · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order in time, ships today
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$1,785.00
02 · Overview

Victron Lithium SuperPack NG 24V/100Ah LiFePO4 Battery — Product description

The Victron Lithium Battery SuperPack 24V/100Ah NG is a LiFePO4 drop-in replacement for lead-acid with a built-in BMS, Bluetooth monitoring, and self-heating. You get 2.56 kWh of 25.6V storage in one case that's ready to mount and wire in.

The Victron Lithium Battery SuperPack 24V/100Ah NG is a Lithium Iron Phosphate (LiFePO4) battery designed as a drop-in replacement for lead-acid in mobile, marine, and industrial systems. Nominal voltage is 25.6V and capacity is 100Ah, so you get 2.56 kWh in one sealed case. If you're building or upgrading a 24V house bank, that's a lot of usable energy in a compact footprint.

Here's what makes it easy to live with. The battery management system is built in, so you're not adding a separate module or a pile of extra components. An internal switch disconnects the battery on over-discharge or high temperature. A self-resetting circuit breaker can interrupt charging and discharging independently. And certain protection events clear on their own, with multiple automatic recovery attempts after a short circuit or over-current condition. That means a transient fault on a rough day doesn't leave you hunting for a reset procedure.

Current capability is generous for a single 100Ah unit. It supports continuous discharge up to 2C and continuous charge up to 1C, which cuts down on the need to oversize the bank just to meet your loads. Internal cell balancing keeps the cells in line at the end of each charge. Capacity isn't a one-battery limit either. You can connect an unlimited number of these in parallel to grow the bank. Just keep the total system current under the maximum a single battery can safely interrupt, and check the battery specification for that figure.

One thing to get right before you order: series connection is not allowed. This is a 24V battery that goes in parallel only. If your system needs a higher voltage, pick the right voltage battery to begin with rather than stringing units together.

Monitoring and control run over Bluetooth through the VictronConnect app, so you can check the battery in real time from your phone. There's an on/off push button on the case that disables both charging and discharging. The same on/off procedure can reset certain protection or lock-in conditions. Switched off, the battery goes into storage mode with a self-discharge rate of less than 3% per month, which is handy for winter layup or a boat that sits between trips. Two LEDs show Bluetooth connectivity, warning and alarm conditions, and firmware update status.

Cold weather is where a lot of lithium batteries get awkward, since charging below freezing isn't safe for the cells. This one has a self-heating function to keep the battery above the minimum safe charging temperature. In charger mode, the heater is powered by the connected charger and kicks in automatically when the cell temperature drops below 0 °C during charging. That's the default. In auto mode, the battery powers the heater itself to keep the cells above 0 °C so you can charge right away. It's limited by the battery's internal energy, though. If state of charge falls below the Low SoC threshold, the heater disconnects and charging stays unavailable.

There's also an External Feedback Signal, limited to 250 mA. It can serve as an External Disconnection Signal to trigger an event for redundant system protection. It can also be configured as an External Charging Signal based on the low SoC pre-alarm threshold, to activate a charger start signal. If you're designing a system with layered protection, that's a useful hook.

Installation is straightforward. The height dimension is compatible with the BCI Group 49 standard, which makes swapping into a standard battery compartment easier. Mounting brackets are included to hold the battery securely in all three axes, and the enclosure is rated IP65 for protection against dust and low-pressure water jets from any direction. That's a good fit for engine rooms, lazarettes, and utility compartments where moisture and vibration come with the territory.

Who's it for? Cruisers and liveaboards replacing a tired lead-acid bank. Anglers adding power for electronics and accessories. RV and van builders who want a clean 24V setup. Anyone running a commercial or industrial vehicle who needs dependable stored energy. It's built for extended off-grid use and enough capacity to run the complete electrical system, including high-demand appliances, when your loads are sized for it.

Key Features

  • 25.6V nominal, 100Ah LiFePO4 chemistry gives you 2.56 kWh in one drop-in case.
  • Built-in BMS with an internal switch that disconnects on over-discharge or high temperature, so you don't add separate protection.
  • Continuous discharge up to 2C and continuous charge up to 1C, so you can size the bank without heavy oversizing.
  • Self-resetting circuit breaker interrupts charging and discharging independently.
  • Bluetooth with VictronConnect lets you monitor and control the battery from your phone.
  • Self-heating function keeps cells above 0 °C for reliable charging in cold weather.
  • Unlimited parallel connection grows capacity as your loads grow. Series connection is not allowed.
  • BCI Group 49 compatible height and included mounting brackets make installation simple.
  • IP65 enclosure protects against dust and low-pressure water jets from any direction.
  • On/off push button with storage mode and self-discharge under 3% per month.

Why Buy from NVN Marine

  • Authorized Victron Energy reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Next-Day) $1,785.00
03 · The numbers

Technical specifications

Title Victron Lithium Battery SuperPack 24V/100Ah NG
Brand Victron Energy
Manufacturer Part Number BAT524110740
UPC 8719076073765
Battery Chemistry Lithium Iron Phosphate (LiFePO4)
Nominal Voltage 25.6V
Capacity 100Ah
Energy Capacity 2.56 kWh
Continuous Discharge Current Up to 2C
Continuous Charge Current Up to 1C
Series Connection Not allowed
Parallel Connection Supported, unlimited number of batteries
Bluetooth Monitoring Integrated, via VictronConnect
Self-Heating Yes, charger mode or auto mode
Ingress Protection IP65
Height Compatibility BCI Group 49
Mounting Brackets Included
Storage Mode Self-Discharge Less than 3% per month
External Feedback Signal Limited to 250 mA
Weight 50 lb (shipping weight)
Package Dimensions (L x W x H) 21.75 x 10.25 x 10.25 in
Category Electrical | Batteries
04 · Before you buy

Frequently asked questions

Can I connect two of these in series to get 48V?

No. Series connection is not allowed with the Lithium SuperPack batteries. They can be connected in parallel to increase total energy capacity.

How many can I connect in parallel?

Victron states you can connect an unlimited number of batteries in parallel. The total system current should not exceed the maximum current that a single battery can safely interrupt. Check the battery specification for that figure.

Does it have Bluetooth monitoring?

Yes. It has an integrated Bluetooth interface for real-time monitoring and control through the VictronConnect app.

Can I charge it in cold weather?

The battery has a self-heating function that keeps it above the minimum safe charging temperature. In charger mode, the connected charger powers the heater, which activates when the cell temperature drops below 0 °C during charging. In auto mode, the battery powers the heater itself, but it stops if state of charge falls below the Low SoC threshold.

What are the continuous charge and discharge limits?

It supports continuous discharge currents up to 2C and continuous charge currents up to 1C.

Will it fit in a BCI Group 49 battery compartment?

Its height dimension is compatible with the BCI Group 49 standard, which allows easy replacement in standard battery compartments. Measure your compartment before ordering.

Are mounting brackets included?

Yes. Mounting brackets are included to fix the battery securely in all three axes.

What happens if I switch it off for the winter?

The on/off push button disables both charging and discharging. When switched off, the battery enters a storage mode with a self-discharge rate of less than 3% per month.

How water resistant is it?

The enclosure is rated IP65, which gives protection against dust ingress and low-pressure water jets from any direction.

What protections does it have?

The integrated BMS keeps energy flow within safe operating limits. An internal switch disconnects the battery in case of over-discharge or high temperature, and a self-resetting circuit breaker can interrupt charging and discharging independently.

05 · Customer voices

Customer reviews