{"product_id":"victron-superpack-ng-12v-200ah-lifepo4-battery","title":"Victron Lithium Battery SuperPack 12V\/200Ah NG","description":"\u003cp class=\"nvn-hero\"\u003eThe Victron Lithium Battery SuperPack 12V\/200Ah NG is a 12.8V LiFePO4 battery built to replace lead-acid in your boat, RV or off-grid rig. It packs a built-in BMS, Bluetooth monitoring through VictronConnect, and a self-heating function for cold-weather charging. Mounting brackets are included.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you've ever lugged a 100-pound lead-acid bank out of a cramped battery locker, the Victron Lithium Battery SuperPack 12V\/200Ah NG (BAT512120740) will feel like a different world. It's a Lithium Iron Phosphate battery (LiFePO4, or LFP for short) built as a drop-in replacement for lead-acid in boats, RVs, vans and off-grid rigs. Nominal 12.8V, 200Ah, and a shipping weight of 49.6 pounds for the whole package.\u003c\/p\u003e\n\u003cp\u003eHere's what we like most. The BMS is built in, so there's no separate box to find room for and no extra parts to wire up. Victron says the SuperPack is extremely easy to install and doesn't need any additional components. If the battery gets over-discharged or runs too hot, an internal switch disconnects it to protect the cells. A self-resetting circuit breaker can interrupt charging and discharging independently, which is a nice layer of safety when you're running a house bank unattended.\u003c\/p\u003e\n\u003cp\u003ePower delivery is where this one earns its keep. It supports continuous discharge currents up to 2C and continuous charge currents up to 1C. In plain terms, you don't have to oversize the bank just to feed a high-demand appliance. Think windlass assist on a small boat, an inverter running a microwave, or a coffee maker on a weekend at anchor. Internal cell balancing keeps the voltage even across the cells at the end of each charge, so the pack stays healthy cycle after cycle.\u003c\/p\u003e\n\u003cp\u003eCold weather is a real problem for lithium, and Victron addressed it head on. The SuperPack has a self-heating function that keeps the cells above the minimum safe charging temperature. There are two modes. In Charger mode, the connected charger powers the heater, and it kicks in automatically when the cell temperature drops below 0 °C during charging. That's the default. In Auto mode, the battery itself powers the heater so the cells stay above 0 °C for immediate charging. That draws on the battery's own energy, so if the state of charge falls below the Low SoC threshold, the heater disconnects and charging stays unavailable until you recover it.\u003c\/p\u003e\n\u003cp\u003eMonitoring is handled through the built-in Bluetooth interface and the VictronConnect app. You can watch the battery in real time and change settings from your phone. Two LEDs on the battery show Bluetooth connectivity, warning and alarm conditions, and firmware update status. A push button switches the battery on or off, which disables both charging and discharging. The same on\/off procedure can reset certain protection or lock-in conditions. Switched off, the battery drops into storage mode with a self-discharge rate of less than 3% per month, so it's fine to leave over the winter layup.\u003c\/p\u003e\n\u003cp\u003eNeed more capacity down the road? You can connect an unlimited number of these batteries in parallel. Series connection is not allowed, so this isn't the pick if you're building a 24V or 48V bank from 12V units. Keep in mind that the total system current shouldn't exceed the maximum current a single battery can safely interrupt. Victron points you to the battery specification sheet for that number, and we'd read it before you design a big parallel bank.\u003c\/p\u003e\n\u003cp\u003eFitting it in is straightforward. The height is compatible with the BCI Group 49 standard, so it can slide into standard battery compartments where an older battery lived. Mounting brackets are included and hold the battery steady in all three axes. The enclosure is rated IP65, which covers dust and low-pressure water jets from any direction. That's good protection against a damp bilge or a wet engine bay, though it's not a license to submerge it.\u003c\/p\u003e\n\u003cp\u003eThe SuperPack also recovers on its own from certain protection events. After a short-circuit or over-current condition, it can make multiple automatic recovery attempts, so an occasional transient fault doesn't leave you hunting for a reset in the dark. There's also an External Feedback Signal (EFS) output, limited to 250 mA. It can act as an External Disconnection Signal for redundant system protection, or be configured as an External Charging Signal based on the low SoC pre-alarm to start a charger.\u003c\/p\u003e\n\u003cp\u003eWho's it for? Cruisers and weekend boaters swapping out a tired AGM bank. Camper van and RV owners chasing more usable capacity in the same footprint. Off-grid cabin setups that need 2,560 Wh of nominal storage in a single box. If you're wiring in an inverter or charger of your own, we're happy to help you size the cables and fusing. And a quick-start guide is available from the distributor for this model, so you'll have the basics on hand before it arrives.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e12.8V, 200Ah LiFePO4 chemistry, so you get 2,560 Wh nominal in a drop-in format.\u003c\/li\u003e\n  \u003cli\u003eBuilt-in BMS with internal cell balancing, no extra components needed to install.\u003c\/li\u003e\n  \u003cli\u003eContinuous discharge up to 2C and charge up to 1C, so you don't have to oversize the bank.\u003c\/li\u003e\n  \u003cli\u003eSelf-heating function with Charger and Auto modes keeps cells above 0 °C for charging.\u003c\/li\u003e\n  \u003cli\u003eBluetooth and VictronConnect for real-time monitoring and control from your phone.\u003c\/li\u003e\n  \u003cli\u003eSelf-resetting circuit breaker interrupts charge and discharge independently.\u003c\/li\u003e\n  \u003cli\u003eParallel connection of an unlimited number of batteries. Series is not allowed.\u003c\/li\u003e\n  \u003cli\u003eBCI Group 49 height compatibility for easy swaps in standard battery compartments.\u003c\/li\u003e\n  \u003cli\u003eIP65 enclosure with included mounting brackets for secure, three-axis mounting.\u003c\/li\u003e\n  \u003cli\u003eOn\/off push button and storage mode with under 3% self-discharge per month.\u003c\/li\u003e\n  \u003cli\u003eExternal Feedback Signal (EFS) output, limited to 250 mA, for redundant system protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Victron Energy reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I wire these batteries in series for 24V or 48V?\u003c\/summary\u003e\n    \u003cp\u003eNo. Series connection is not allowed with the Lithium SuperPack batteries. You can connect an unlimited number of them in parallel to add capacity at 12V.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a drop-in replacement for a lead-acid battery?\u003c\/summary\u003e\n    \u003cp\u003eYes, that's how it's designed. Victron built the SuperPack as a drop-in replacement for lead-acid batteries in mobile, marine and industrial use, and the height is compatible with the BCI Group 49 standard.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need any extra components to install it?\u003c\/summary\u003e\n    \u003cp\u003eVictron says the SuperPack is extremely easy to install and doesn't need additional components. The BMS is integrated and mounting brackets are included.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I monitor the battery?\u003c\/summary\u003e\n    \u003cp\u003eIt has an integrated Bluetooth interface. Use the VictronConnect app for real-time monitoring and control. Two LEDs on the battery also show Bluetooth connectivity, warning and alarm conditions, and firmware update status.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan it charge in cold weather?\u003c\/summary\u003e\n    \u003cp\u003eIt has a self-heating function. In the default Charger mode, the charger powers the heater and it activates when the cell temperature drops below 0 °C during charging. In Auto mode, the battery powers the heater, but if state of charge falls below the Low SoC threshold the heater disconnects and charging stays unavailable.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the on\/off push button do?\u003c\/summary\u003e\n    \u003cp\u003eIt switches the battery on or off, which disables both charging and discharging. The same procedure can reset certain protection or lock-in conditions. When it's off, the battery sits in storage mode with self-discharge under 3% per month.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it waterproof?\u003c\/summary\u003e\n    \u003cp\u003eThe enclosure is rated IP65, which means protection against dust and low-pressure water jets from any direction. It's not rated for submersion.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat protections are built in?\u003c\/summary\u003e\n    \u003cp\u003eAn internal BMS keeps energy flow within safe limits, an internal switch disconnects the battery on over-discharge or high temperature, and a self-resetting circuit breaker interrupts charging and discharging independently. It also makes multiple automatic recovery attempts after short-circuit and over-current events.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long will a 200Ah battery run an inverter?\u003c\/summary\u003e\n    \u003cp\u003eIt depends on the load. As rough math, 12.8V x 200Ah is 2,560 Wh nominal. A steady 500 W load would run about five hours on paper, and less once you account for inverter losses. Add up your actual loads before you size the bank.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eAre the mounting brackets included?\u003c\/summary\u003e\n    \u003cp\u003eYes. Victron includes mounting brackets to fix the battery securely in all three axes.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eVictron Lithium Battery SuperPack 12V\/200Ah NG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVictron Energy\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eBAT512120740\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e8719076076414\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eElectrical | Batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBattery Chemistry\u003c\/th\u003e\n\u003ctd\u003eLithium Iron Phosphate (LiFePO4 or LFP)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eNominal Voltage\u003c\/th\u003e\n\u003ctd\u003e12.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e200Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eEnergy Capacity\u003c\/th\u003e\n\u003ctd\u003e2,560 Wh\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eContinuous Discharge Current\u003c\/th\u003e\n\u003ctd\u003eUp to 2C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eContinuous Charge Current\u003c\/th\u003e\n\u003ctd\u003eUp to 1C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eIngress Protection\u003c\/th\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight Standard Compatibility\u003c\/th\u003e\n\u003ctd\u003eBCI Group 49\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eParallel Connection\u003c\/th\u003e\n\u003ctd\u003eSupported, unlimited number of batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries Connection\u003c\/th\u003e\n\u003ctd\u003eNot allowed\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMonitoring\u003c\/th\u003e\n\u003ctd\u003eBluetooth via VictronConnect\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSelf-Heating\u003c\/th\u003e\n\u003ctd\u003eYes, Charger mode or Auto mode\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSelf-Discharge in Storage Mode\u003c\/th\u003e\n\u003ctd\u003eLess than 3% per month\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eExternal Feedback Signal (EFS)\u003c\/th\u003e\n\u003ctd\u003eLimited to 250 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Brackets\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e49.6 lb (shipping weight)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePackage Dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e21.50 x 10.75 x 10.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I wire these batteries in series for 24V or 48V?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. Series connection is not allowed with the Lithium SuperPack batteries. You can connect an unlimited number of them in parallel to add capacity at 12V.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a drop-in replacement for a lead-acid battery?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, that's how it's designed. Victron built the SuperPack as a drop-in replacement for lead-acid batteries in mobile, marine and industrial use, and the height is compatible with the BCI Group 49 standard.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need any extra components to install it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Victron says the SuperPack is extremely easy to install and doesn't need additional components. The BMS is integrated and mounting brackets are included.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I monitor the battery?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It has an integrated Bluetooth interface. Use the VictronConnect app for real-time monitoring and control. Two LEDs on the battery also show Bluetooth connectivity, warning and alarm conditions, and firmware update status.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can it charge in cold weather?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It has a self-heating function. In the default Charger mode, the charger powers the heater and it activates when the cell temperature drops below 0 \\u00b0C during charging. In Auto mode, the battery powers the heater, but if state of charge falls below the Low SoC threshold the heater disconnects and charging stays unavailable.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the on\/off push button do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It switches the battery on or off, which disables both charging and discharging. The same procedure can reset certain protection or lock-in conditions. When it's off, the battery sits in storage mode with self-discharge under 3% per month.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it waterproof?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The enclosure is rated IP65, which means protection against dust and low-pressure water jets from any direction. It's not rated for submersion.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What protections are built in?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"An internal BMS keeps energy flow within safe limits, an internal switch disconnects the battery on over-discharge or high temperature, and a self-resetting circuit breaker interrupts charging and discharging independently. It also makes multiple automatic recovery attempts after short-circuit and over-current events.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long will a 200Ah battery run an inverter?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It depends on the load. As rough math, 12.8V x 200Ah is 2,560 Wh nominal. A steady 500 W load would run about five hours on paper, and less once you account for inverter losses. Add up your actual loads before you size the bank.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Are the mounting brackets included?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Victron includes mounting brackets to fix the battery securely in all three axes.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":68050203050077,"sku":"112888","price":1785.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/112888XL.jpg?v=1794967227","url":"https:\/\/nvnmarine.com\/products\/victron-superpack-ng-12v-200ah-lifepo4-battery","provider":"NVN Marine","version":"1.0","type":"link"}