Victron Quattro 24/5000/120 100/100 120V VE.Bus (UL458)
Victron Quattro 24/5000/120 100/100 120V VE.Bus (UL458) — Product description
The Victron Quattro 24/5000/120 100/100 120V VE.Bus (UL458) is a 24V inverter charger with two AC inputs, two AC outputs and an integrated transfer switch. It switches between shore power and a generator on its own, charges your bank at up to 120 Amps, and keeps your electronics running when a source drops.
The Victron Quattro 24/5000/120 100/100 120V VE.Bus (UL458) is an inverter charger built for boats and rigs that live on more than one power source. It takes 24V DC from your battery bank and turns it into pure sine wave 120 volt, 60 Hz AC. It also charges that bank. And it has two AC inputs, which is the part that sets the Quattro apart.
Here's why two inputs matter. Say you've got shore power at the slip and a generator on board. Wire each one to its own input, and the integrated transfer switch connects to whichever source is active, automatically. No flipping a manual switch. No unplugging one cord to run the other. The transfer switch is rated 2 x 100 Amp, so it's sized for real loads and not just a couple of outlets. The unit also gives you two AC outputs.
Then there's the UPS side of things. The output has UPS functionality, and the Quattro can take over the power supply to your loads so quickly that computers and other equipment aren't interrupted. If shore power drops while you're running a laptop or a chartplotter on AC, the switchover is built to be fast enough that they keep running.
Charging is serious here. The main battery charger is rated 120 Amp, and there's a separate 4 Amp charger for a start battery. A battery temperature sensor is included, so charging can account for the real temperature of the bank instead of guessing. PowerControl and PowerAssist are both listed as Yes. In plain terms, the Quattro is built to avoid overloading a limited AC source like a generator or a shore power connection, and it trims battery charging first when the load climbs.
The AC inputs accept 90-140 VAC at 45 65 Hz, with a power factor of 1. That wide window is handy when you're plugging into marina pedestals or a generator that's not perfectly steady. It talks over VE.Bus, and an optional remote panel is available if you'd like a control spot away from the unit. The remote panel is sold separately.
Want more output down the road? Multiple units can be configured together to provide 240-volt, three-phase, or other configurations up to a maximum of 50 kVA output. You don't have to plan for that on day one, but it's good to know the door's open.
On the install side, plan ahead. This one weighs 66 lbs and measures 17.5 x 13 x 9.6 inches, so it needs a solid mounting surface and room for heavy DC cabling. Don't hang it on thin plywood and hope for the best. Give it a proper backing, keep the battery cable runs short, and you'll thank yourself later.
One more thing to check before you order. This is the 24V model with a 120V, 60 Hz output. If your house bank is 12V, Victron also builds the Quattro for 12V systems, so match the first number in the model name to your battery voltage. The unit is UL458 listed per the model designation and comes with a 5-year warranty, with extended warranty available.
If your boat runs a 24V bank, sees shore power and a generator, and you want one box that handles inverting, charging and switching between sources, this is the kind of gear that earns its spot at the helm of your electrical system. It's a good fit for a larger cruiser or trawler with a 24V system, where you'd rather not juggle separate inverters, chargers and transfer switches. Fewer boxes means fewer connections to chase down. We're happy to help you sort out the rest of the install, so reach out to the crew if you've got questions about your setup.
Key Features
- 24V DC input, built for 24V house battery banks
- Pure sine wave 120 volt 60 Hz AC output for sensitive electronics
- Two AC inputs and two AC outputs with an integrated transfer switch that connects to the active source
- 2 x 100 Amp transfer switch handles heavy shore or generator loads
- 120 Amp charger for the main battery bank
- 4 Amp charger for a separate start battery
- UPS functionality, so computers and other equipment aren't interrupted when the source drops
- PowerControl and PowerAssist to help protect a limited AC source like a generator
- Battery temperature sensor included
- Multiple units can be combined for 240-volt, three-phase, or other setups up to 50 kVA output
- Compact 17.5" x 13" x 9.6" footprint, 66 lbs
- 5-year warranty, with extended warranty available
Why Buy from NVN Marine
- Authorized Victron Energy reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Victron Quattro 24/5000/120 100/100 120V VE.Bus (UL458) |
|---|---|
| Brand | Victron Energy |
| Manufacturer Part Number | QUA242503112 |
| UPC | 8719076079781 |
| Category | Charger/Inverter Combos |
| DC Input Voltage | 24V DC |
| AC Output | Pure Sine Wave 120 volt 60 Hz |
| AC Inputs | 2 |
| AC Input Voltage Range | 90-140 VAC |
| AC Input Frequency | 45 65 Hz |
| Power Factor | 1 |
| Integrated Transfer Switch | Yes |
| Transfer Switch Rating | 2 x 100 Amp |
| Main Battery Charger | 120 Amp |
| Start Battery Charger | 4 Amp |
| PowerControl / PowerAssist | Yes |
| Battery Temperature Sensor | Included |
| Maximum Combined Output (multiple units) | 50 kVA |
| Communication | VE.Bus |
| Product Dimensions (L x W x H) | 17.5" x 13" x 9.6" |
| Weight | 66 lbs |
| Package Dimensions (L x W x H) | 21.50 x 17.50 x 14.50 in |
| Warranty | 5 years |
Frequently asked questions
What DC voltage does the Victron Quattro 24/5000/120 need?
It has a 24V DC input, so it's meant for 24V battery banks. Victron also makes the Quattro for 12V systems, so check your bank voltage before ordering.
What kind of AC output does it produce?
It delivers a pure sine wave 120 volt 60 Hz AC output.
Why does the Quattro have two AC inputs?
It has two AC inputs and two AC outputs. The integrated transfer switch automatically connects to the active source, so you can wire in shore power on one input and a generator on the other.
What is the transfer switch rated for?
The transfer switch is rated 2 x 100 Amp.
How big is the battery charger?
There's a 120 Amp charger for the main battery and a 4 Amp charger for a start battery.
Does it come with a battery temperature sensor?
Yes. A battery temperature sensor is included.
Is the remote panel included?
No. An optional remote panel is available, and it's sold separately.
Will it work as a UPS for computers and electronics?
The output has UPS functionality, and the Quattro can take over the power supply to loads so quickly that computers and other equipment are not interrupted.
Can I connect more than one unit?
Yes. Multiple units can be configured together to provide 240-volt, three-phase, or other configurations up to a maximum of 50 kVA output.
What AC input voltage range does it accept?
The two AC inputs accept 90-140 VAC at 45 65 Hz, with a power factor of 1.
How much does it weigh and how big is it?
It weighs 66 lbs and measures 17.5" x 13" x 9.6". Shipping box size is 21.50 x 17.50 x 14.50 inches.
What warranty does it have?
It comes with a 5-year warranty. Extended warranty is available.