{"product_id":"victron-multi-rs-solar-48-6000-inverter-charger","title":"Victron Multi RS Solar 48\/6000 Inverter\/Charger","description":"\u003cp class=\"nvn-hero\"\u003eThe Victron Multi RS Solar 48\/6000 combines a 48V, 6kVA inverter\/charger with two independent 3kWp MPPT solar trackers in one unit. That's 6kWp of panel capacity, five operating modes and built-in Bluetooth monitoring. It's a tidy way to run a larger house bank and your solar from one box.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Victron Multi RS Solar 48\/6000 puts an inverter, a battery charger and a solar charge controller in one unit. It's a 48V, 6kVA inverter\/charger with two independent 3kWp PV 450V MPPT trackers, so you can land up to 6kWp of panels on a single piece of gear. If you're building a serious house bank and you're tired of a wall full of separate boxes, this is the kind of unit that tidies things up.\u003c\/p\u003e\n\u003cp\u003eVictron updated the Multi RS Solar in mid-2023 to a dual tracker design. Each tracker handles its own string of panels. That matters when your array is split across two roof areas, a hardtop and a bimini frame, or two different orientations. Each string gets managed on its own instead of dragging the other one down.\u003c\/p\u003e\n\u003cp\u003eThe unit uses high-frequency technology. Victron lists it as efficient, quiet and light, with low standby power. That last part counts on a boat or a liveaboard rig where every watt-hour you don't burn at idle is one you keep. Shipping weight is 33.55 lb, so it's something you can carry to the install spot without a crew of four.\u003c\/p\u003e\n\u003cp\u003eIt's flexible about how it runs. Hybrid mode stores extra solar energy in the battery for the night or for peak demand, and pulls from the battery when demand outruns the grid. Backup mode takes over during a grid outage. Off-grid mode works with no grid connection at all. Generator mode controls the generator to cut run hours, with the battery covering any load the generator can't. And PV Inverter mode lets it work as a PV inverter with no battery. It also supports direct grid connection without batteries, so you can start simple and add storage later.\u003c\/p\u003e\n\u003cp\u003ePowerControl and PowerAssist handle the shore power or generator side. You set a maximum grid or generator current. The Multi RS then accounts for your other AC loads and uses whatever's left over for battery charging, so you don't trip the pedestal breaker or overload a small generator. PowerAssist goes a step further. When a short peak load shows up, the battery makes up the shortfall, then recharges when the load drops back down.\u003c\/p\u003e\n\u003cp\u003eMonitoring is built in. The display reads battery, inverter and solar parameters. You can see the same numbers on a phone or any Bluetooth device through the VictronConnect app, which also gives you historical trends, firmware updates and configuration tools. Connect it to a Cerbo GX and you get advanced ESS functions, including zero-export to block grid feed-in and backup mode to power critical loads during outages.\u003c\/p\u003e\n\u003cp\u003eFor communication, there's a VE.Can connection to a GX device for system monitoring, an energy meter, data logging and remote firmware updates. There's also a VE.Direct connection to a GlobalLink 520 for remote monitoring. On the I\/O side you get a programmable relay, plus temperature sensor and voltage sensor connections.\u003c\/p\u003e\n\u003cp\u003eNeed more solar later? The integrated 6kWp capacity can be extended by adding solar chargers. You can also add PV inverters, and the Multi RS will control their output automatically with frequency shift power control. So the system can grow with your boat or your power needs. That's a real plus if you're planning a refit in stages, since you don't have to buy every panel on day one.\u003c\/p\u003e\n\u003cp\u003eOne honest note. The listing data we have doesn't spell out the AC output voltage or the exact inverter and charger current ratings, so check the owner's manual and installation guide before you design around this unit. Victron's literature is available for this model, and our crew is happy to help you sort out the system layout. For returns, repairs and support, the manufacturer asks that you go through your dealer, and that's us.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e48V, 6kVA inverter\/charger, so one unit covers inverting, charging and solar in a 48V system.\u003c\/li\u003e\n  \u003cli\u003eTwo independent 3kWp PV 450V MPPT trackers give you 6kWp of total panel capacity, handy for split arrays.\u003c\/li\u003e\n  \u003cli\u003eDirect grid connection without batteries, so you can start simple and add storage later.\u003c\/li\u003e\n  \u003cli\u003eFive operating modes: Hybrid, Backup, Off-grid, Generator and PV Inverter.\u003c\/li\u003e\n  \u003cli\u003ePowerControl and PowerAssist keep a generator or shore connection from being overloaded.\u003c\/li\u003e\n  \u003cli\u003eIntegrated display plus Bluetooth and the VictronConnect app for live data, history trends and firmware updates.\u003c\/li\u003e\n  \u003cli\u003eVE.Can port for GX device monitoring and VE.Direct port for GlobalLink 520 remote monitoring.\u003c\/li\u003e\n  \u003cli\u003eProgrammable relay, temperature sensor and voltage sensor connections for system control.\u003c\/li\u003e\n  \u003cli\u003eExpandable PV capacity, using added solar chargers or PV inverters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Victron Energy reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does 48\/6000 mean on the Victron Multi RS Solar?\u003c\/summary\u003e\n    \u003cp\u003eIt's a 48V inverter\/charger with a 6kVA rating. The Multi RS Solar 48\/6000 is built for 48V battery systems.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much solar can I connect to the Multi RS Solar 48\/6000?\u003c\/summary\u003e\n    \u003cp\u003eIt has two independent 3kWp PV 450V MPPT trackers, for 6kWp of total panel capacity. You can also extend capacity by adding solar chargers or PV inverters.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need a battery to use it?\u003c\/summary\u003e\n    \u003cp\u003eNo. The unit supports direct grid connection without batteries, and PV Inverter mode lets it work as a PV inverter with no battery. You can add storage later.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat operating modes does it offer?\u003c\/summary\u003e\n    \u003cp\u003eHybrid, Backup, Off-grid, Generator and PV Inverter. Hybrid stores excess solar in a battery, Backup takes over during a grid outage, Off-grid runs with no grid, Generator controls a generator to minimize run hours, and PV Inverter works without a battery.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are PowerControl and PowerAssist?\u003c\/summary\u003e\n    \u003cp\u003ePowerControl lets you set a maximum grid or generator current so the unit uses leftover power for battery charging and doesn't overload the source. PowerAssist adds battery power to cover peak loads, then recharges when the load drops.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I monitor and configure it?\u003c\/summary\u003e\n    \u003cp\u003eUse the integrated display, or connect with a smartphone or other Bluetooth device through the VictronConnect app. The app also gives you historical trends, firmware updates and configuration tools.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I connect it to a Cerbo GX?\u003c\/summary\u003e\n    \u003cp\u003eYes. Connecting to a Cerbo GX unlocks advanced ESS functions such as zero-export to block grid feed-in and backup mode to power critical loads during outages. The VE.Can port is used for GX device connection.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat changed in the 2023 update?\u003c\/summary\u003e\n    \u003cp\u003eVictron updated the Multi RS Solar in mid-2023 to a dual tracker design with two independent PV trackers.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the AC output voltage?\u003c\/summary\u003e\n    \u003cp\u003eThe listing data we have doesn't state it. Check the owner's manual and installation guide before you buy, or ask our crew and we'll help you confirm it for your setup.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs documentation available?\u003c\/summary\u003e\n    \u003cp\u003eManufacturer literature for this model includes an owner's manual, installation guide, brochure and quick start guide.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eVictron Multi RS Solar 48\/6000 Inverter\/Charger\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVictron Energy\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003ePMR482602020\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e8719076056690\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eNominal Battery Voltage\u003c\/th\u003e\n\u003ctd\u003e48V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePower Rating\u003c\/th\u003e\n\u003ctd\u003e6kVA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePV Trackers\u003c\/th\u003e\n\u003ctd\u003e2 independent MPPT trackers\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePV Capacity Per Tracker\u003c\/th\u003e\n\u003ctd\u003e3kWp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTotal PV Capacity\u003c\/th\u003e\n\u003ctd\u003e6kWp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum PV Voltage\u003c\/th\u003e\n\u003ctd\u003e450V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperating Modes\u003c\/th\u003e\n\u003ctd\u003eHybrid, Backup, Off-grid, Generator, PV Inverter\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCommunication Ports\u003c\/th\u003e\n\u003ctd\u003eVE.Can, VE.Direct\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWireless Connectivity\u003c\/th\u003e\n\u003ctd\u003eBluetooth via VictronConnect app\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eDisplay\u003c\/th\u003e\n\u003ctd\u003eIntegrated display\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eI\/O Connections\u003c\/th\u003e\n\u003ctd\u003eProgrammable relay, temperature sensor, voltage sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e33.55 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePackage Dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e22.00 x 19.50 x 9.00 in\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does 48\/6000 mean on the Victron Multi RS Solar?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a 48V inverter\/charger with a 6kVA rating. The Multi RS Solar 48\/6000 is built for 48V battery systems.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much solar can I connect to the Multi RS Solar 48\/6000?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It has two independent 3kWp PV 450V MPPT trackers, for 6kWp of total panel capacity. You can also extend capacity by adding solar chargers or PV inverters.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need a battery to use it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The unit supports direct grid connection without batteries, and PV Inverter mode lets it work as a PV inverter with no battery. You can add storage later.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What operating modes does it offer?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Hybrid, Backup, Off-grid, Generator and PV Inverter. Hybrid stores excess solar in a battery, Backup takes over during a grid outage, Off-grid runs with no grid, Generator controls a generator to minimize run hours, and PV Inverter works without a battery.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are PowerControl and PowerAssist?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"PowerControl lets you set a maximum grid or generator current so the unit uses leftover power for battery charging and doesn't overload the source. PowerAssist adds battery power to cover peak loads, then recharges when the load drops.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I monitor and configure it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Use the integrated display, or connect with a smartphone or other Bluetooth device through the VictronConnect app. The app also gives you historical trends, firmware updates and configuration tools.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I connect it to a Cerbo GX?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Connecting to a Cerbo GX unlocks advanced ESS functions such as zero-export to block grid feed-in and backup mode to power critical loads during outages. The VE.Can port is used for GX device connection.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What changed in the 2023 update?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Victron updated the Multi RS Solar in mid-2023 to a dual tracker design with two independent PV trackers.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the AC output voltage?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The listing data we have doesn't state it. Check the owner's manual and installation guide before you buy, or ask our crew and we'll help you confirm it for your setup.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is documentation available?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Manufacturer literature for this model includes an owner's manual, installation guide, brochure and quick start guide.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":68049820778589,"sku":"113793","price":1892.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/113793XL.jpg?v=1794963472","url":"https:\/\/nvnmarine.com\/products\/victron-multi-rs-solar-48-6000-inverter-charger","provider":"NVN Marine","version":"1.0","type":"link"}