Victron Multi RS Solar 48/6000 Inverter/Charger
Victron Multi RS Solar 48/6000 Inverter/Charger — Product description
The Victron Multi RS Solar 48/6000 combines a 48V, 6kVA inverter/charger with two independent 3kWp MPPT solar trackers in one unit. That's 6kWp of panel capacity, five operating modes and built-in Bluetooth monitoring. It's a tidy way to run a larger house bank and your solar from one box.
The Victron Multi RS Solar 48/6000 puts an inverter, a battery charger and a solar charge controller in one unit. It's a 48V, 6kVA inverter/charger with two independent 3kWp PV 450V MPPT trackers, so you can land up to 6kWp of panels on a single piece of gear. If you're building a serious house bank and you're tired of a wall full of separate boxes, this is the kind of unit that tidies things up.
Victron updated the Multi RS Solar in mid-2023 to a dual tracker design. Each tracker handles its own string of panels. That matters when your array is split across two roof areas, a hardtop and a bimini frame, or two different orientations. Each string gets managed on its own instead of dragging the other one down.
The unit uses high-frequency technology. Victron lists it as efficient, quiet and light, with low standby power. That last part counts on a boat or a liveaboard rig where every watt-hour you don't burn at idle is one you keep. Shipping weight is 33.55 lb, so it's something you can carry to the install spot without a crew of four.
It's flexible about how it runs. Hybrid mode stores extra solar energy in the battery for the night or for peak demand, and pulls from the battery when demand outruns the grid. Backup mode takes over during a grid outage. Off-grid mode works with no grid connection at all. Generator mode controls the generator to cut run hours, with the battery covering any load the generator can't. And PV Inverter mode lets it work as a PV inverter with no battery. It also supports direct grid connection without batteries, so you can start simple and add storage later.
PowerControl and PowerAssist handle the shore power or generator side. You set a maximum grid or generator current. The Multi RS then accounts for your other AC loads and uses whatever's left over for battery charging, so you don't trip the pedestal breaker or overload a small generator. PowerAssist goes a step further. When a short peak load shows up, the battery makes up the shortfall, then recharges when the load drops back down.
Monitoring is built in. The display reads battery, inverter and solar parameters. You can see the same numbers on a phone or any Bluetooth device through the VictronConnect app, which also gives you historical trends, firmware updates and configuration tools. Connect it to a Cerbo GX and you get advanced ESS functions, including zero-export to block grid feed-in and backup mode to power critical loads during outages.
For communication, there's a VE.Can connection to a GX device for system monitoring, an energy meter, data logging and remote firmware updates. There's also a VE.Direct connection to a GlobalLink 520 for remote monitoring. On the I/O side you get a programmable relay, plus temperature sensor and voltage sensor connections.
Need more solar later? The integrated 6kWp capacity can be extended by adding solar chargers. You can also add PV inverters, and the Multi RS will control their output automatically with frequency shift power control. So the system can grow with your boat or your power needs. That's a real plus if you're planning a refit in stages, since you don't have to buy every panel on day one.
One honest note. The listing data we have doesn't spell out the AC output voltage or the exact inverter and charger current ratings, so check the owner's manual and installation guide before you design around this unit. Victron's literature is available for this model, and our crew is happy to help you sort out the system layout. For returns, repairs and support, the manufacturer asks that you go through your dealer, and that's us.
Key Features
- 48V, 6kVA inverter/charger, so one unit covers inverting, charging and solar in a 48V system.
- Two independent 3kWp PV 450V MPPT trackers give you 6kWp of total panel capacity, handy for split arrays.
- Direct grid connection without batteries, so you can start simple and add storage later.
- Five operating modes: Hybrid, Backup, Off-grid, Generator and PV Inverter.
- PowerControl and PowerAssist keep a generator or shore connection from being overloaded.
- Integrated display plus Bluetooth and the VictronConnect app for live data, history trends and firmware updates.
- VE.Can port for GX device monitoring and VE.Direct port for GlobalLink 520 remote monitoring.
- Programmable relay, temperature sensor and voltage sensor connections for system control.
- Expandable PV capacity, using added solar chargers or PV inverters.
Why Buy from NVN Marine
- Authorized Victron Energy reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Victron Multi RS Solar 48/6000 Inverter/Charger |
|---|---|
| Brand | Victron Energy |
| Manufacturer Part Number | PMR482602020 |
| UPC | 8719076056690 |
| Nominal Battery Voltage | 48V |
| Power Rating | 6kVA |
| PV Trackers | 2 independent MPPT trackers |
| PV Capacity Per Tracker | 3kWp |
| Total PV Capacity | 6kWp |
| Maximum PV Voltage | 450V |
| Operating Modes | Hybrid, Backup, Off-grid, Generator, PV Inverter |
| Communication Ports | VE.Can, VE.Direct |
| Wireless Connectivity | Bluetooth via VictronConnect app |
| Display | Integrated display |
| I/O Connections | Programmable relay, temperature sensor, voltage sensor |
| Weight | 33.55 lb |
| Package Dimensions (L x W x H) | 22.00 x 19.50 x 9.00 in |
Frequently asked questions
What does 48/6000 mean on the Victron Multi RS Solar?
It's a 48V inverter/charger with a 6kVA rating. The Multi RS Solar 48/6000 is built for 48V battery systems.
How much solar can I connect to the Multi RS Solar 48/6000?
It has two independent 3kWp PV 450V MPPT trackers, for 6kWp of total panel capacity. You can also extend capacity by adding solar chargers or PV inverters.
Do I need a battery to use it?
No. The unit supports direct grid connection without batteries, and PV Inverter mode lets it work as a PV inverter with no battery. You can add storage later.
What operating modes does it offer?
Hybrid, Backup, Off-grid, Generator and PV Inverter. Hybrid stores excess solar in a battery, Backup takes over during a grid outage, Off-grid runs with no grid, Generator controls a generator to minimize run hours, and PV Inverter works without a battery.
What are PowerControl and PowerAssist?
PowerControl lets you set a maximum grid or generator current so the unit uses leftover power for battery charging and doesn't overload the source. PowerAssist adds battery power to cover peak loads, then recharges when the load drops.
How do I monitor and configure it?
Use the integrated display, or connect with a smartphone or other Bluetooth device through the VictronConnect app. The app also gives you historical trends, firmware updates and configuration tools.
Can I connect it to a Cerbo GX?
Yes. Connecting to a Cerbo GX unlocks advanced ESS functions such as zero-export to block grid feed-in and backup mode to power critical loads during outages. The VE.Can port is used for GX device connection.
What changed in the 2023 update?
Victron updated the Multi RS Solar in mid-2023 to a dual tracker design with two independent PV trackers.
What's the AC output voltage?
The listing data we have doesn't state it. Check the owner's manual and installation guide before you buy, or ask our crew and we'll help you confirm it for your setup.
Is documentation available?
Manufacturer literature for this model includes an owner's manual, installation guide, brochure and quick start guide.