{"product_id":"vetus-hato001-soft-close-marine-toilet-seat-white","title":"VETUS HATO001 Soft-Close Toilet Seat and Cover for Hato Toilets","description":"\u003cp class=\"nvn-hero\"\u003eThe VETUS HATO001 is the factory soft-close, quick-release seat and cover for Hato 1 and Hato 2 series electric marine toilets. Elongated, closed-front, white plastic, no logo. The lid eases shut instead of slamming when the boat rolls, and the hinges unclip in seconds for a proper cleaning. A direct swap for a worn or cracked original seat.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf your Hato electric toilet's seat has seen better days, or you just want that quiet, controlled close, the VETUS HATO001 is the direct replacement. It's the elongated, closed-front seat and cover assembly built for the Hato 1 and Hato 2 series electric marine toilets. White, molded plastic, no logo. It drops right onto the bowl it was designed for.\u003c\/p\u003e\n\u003cp\u003eLet's talk about the soft-close first, because it's the part you'll notice every day. Anyone who's spent a night aboard in a seaway knows the sound of a toilet lid slamming shut when the hull rolls. The soft-close hinges take that away. Lower the lid and it eases down on its own, slow and quiet. No slam, no pinched fingers. On an overnight passage with crew asleep in the forward cabin, that matters more than you'd think.\u003c\/p\u003e\n\u003cp\u003eThen there's the quick-release. The two hinges unclip so you can lift the whole seat off the bowl in a few seconds, no tools needed. That's the difference between a head that gets cleaned properly and one that doesn't. You pull the seat, wipe down the hinge posts and the rim where grime always hides, and snap it back on. Two minutes, start to finish.\u003c\/p\u003e\n\u003cp\u003eFitment is the easy part here. This is the factory seat for the Hato 1 and Hato 2 electric toilets, so the hinge holes and the bowl footprint line up the way they're supposed to. It's an elongated, closed-front shape, which is exactly what those bowls use. The closed front also helps cut down on splash when the boat's working in a chop, something smaller boats with the head up near the bow really appreciate.\u003c\/p\u003e\n\u003cp\u003eThe seat and cover are molded plastic, wipe-clean, and made to live in the damp, salty air of a marine head. One habit worth building: keep the cover down when the seat's not in use, especially in a head that gets direct sun through a hatch or port. Sun is hard on any plastic over the seasons, and a closed cover keeps the hinges and the top surface out of the worst of it. Do that and this seat will outlast a lot of the boat.\u003c\/p\u003e\n\u003cp\u003eWho's this for? If you've got a Hato 1 or Hato 2 electric marine toilet and the original seat has cracked, yellowed, or the hinges have gone sloppy, this is the exact part to bring it back to life. It's also a straightforward upgrade if your older Hato came with a plain seat and you want the soft-close and quick-release. Just know it's a seat and cover only, not a complete toilet, so you keep your existing Hato base and pump.\u003c\/p\u003e\n\u003cp\u003eInstalling it is about as simple as boat jobs get. Remove the old seat at the two rear mounts, line the new hinge posts up with the mounting holes in the Hato bowl, drop the fasteners in, and snug them down. You're not fighting sealant or plumbing here, just the two rear mounts. Call it ten minutes with a basic wrench, and most of that is wiping down the area while the seat's off.\u003c\/p\u003e\n\u003cp\u003eOne honest note before you order. This seat is matched to the Hato 1 and Hato 2 bowls specifically. If you're running a different toilet, or an older or newer VETUS head that isn't in the Hato 1 or 2 family, check your model first, because seat footprints vary across the range. Get the base match right and this is a five-minute job.\u003c\/p\u003e\n\u003cp\u003eFor a part that gets used every day and takes a beating from salt air, sun, and the motion of the boat, a proper factory seat is money well spent. A cracked or wobbly seat is one of those small annoyances that nags at you every single time you step into the head. This puts it right. And because it's the genuine VETUS assembly, the fit and finish match the rest of the toilet instead of looking like an afterthought.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSoft-close hinges lower the lid slowly and quietly, so there's no slamming when the boat rolls in a seaway\u003c\/li\u003e\n  \u003cli\u003eQuick-release mechanism unclips the seat in seconds with no tools, so you can clean the bowl rim and hinge posts properly\u003c\/li\u003e\n  \u003cli\u003eElongated, closed-front shape matches the Hato 1 and Hato 2 bowl and helps cut splash in a chop\u003c\/li\u003e\n  \u003cli\u003eMolded white plastic wipes clean and stands up to the damp, salty air of a marine head\u003c\/li\u003e\n  \u003cli\u003eDirect factory replacement for Hato 1 and Hato 2 series electric marine toilets, hinge holes line up as designed\u003c\/li\u003e\n  \u003cli\u003eIncludes the matching cover with no logo for a clean finish\u003c\/li\u003e\n  \u003cli\u003eTwo rear mounts make it a ten-minute swap with a basic wrench, no plumbing or sealant\u003c\/li\u003e\n  \u003cli\u003eGenuine VETUS part number HATO001 for correct fit and finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized VETUS reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhich toilets does the VETUS HATO001 seat fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's the factory replacement seat and cover for the Hato 1 and Hato 2 series electric marine toilets. It's built for those elongated, closed-front bowls, so the hinge holes and footprint line up as designed. It won't fit other toilet models.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it have soft-close hinges?\u003c\/summary\u003e\n    \u003cp\u003eYes. The lid eases down slowly and quietly on its own once you lower it, so there's no slamming when the boat rolls. That's a nice touch on an overnight when the crew's asleep.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does quick-release mean here?\u003c\/summary\u003e\n    \u003cp\u003eThe two hinges unclip so you can lift the whole seat off the bowl in seconds without tools. That lets you clean the bowl rim and hinge posts properly, then snap it back on.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the cover included?\u003c\/summary\u003e\n    \u003cp\u003eYes, the seat comes with its matching cover. It's white plastic with no logo.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a complete toilet or just the seat?\u003c\/summary\u003e\n    \u003cp\u003eJust the seat and cover assembly. You keep your existing Hato 1 or Hato 2 base and pump. It's the part you replace when the original seat cracks, yellows, or the hinges wear out.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs it round or elongated?\u003c\/summary\u003e\n    \u003cp\u003eElongated with a closed front, matching the Hato 1 and Hato 2 bowls. The closed front also helps cut splash when the boat's working in a chop.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow hard is it to install?\u003c\/summary\u003e\n    \u003cp\u003eSimple. Remove the old seat at the two rear mounts, line the new hinge posts up with the holes in the Hato bowl, and snug the fasteners down. No plumbing or sealant. About ten minutes with a basic wrench.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I make the seat last in a marine head?\u003c\/summary\u003e\n    \u003cp\u003eKeep the cover down when it's not in use, especially in a head that gets direct sun through a hatch or port. Sun is hard on any plastic over time, and a closed cover keeps the top surface and hinges out of the worst of it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's it made of?\u003c\/summary\u003e\n    \u003cp\u003eMolded plastic in white, with no logo. It wipes clean and handles the damp, salty air of a marine head.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eVETUS HATO001 Toilet Seat and Cover, Hato 1 and Hato 2 Series, Elongated Closed Front, White\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVETUS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eHATO001\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e8717372244575\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eHato 1 and Hato 2 Series Electric Marine Toilets\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eShape\u003c\/th\u003e\n\u003ctd\u003eElongated\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFront Style\u003c\/th\u003e\n\u003ctd\u003eClosed Front\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCover\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLogo\u003c\/th\u003e\n\u003ctd\u003eWithout Logo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSoft-Close Function\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuick-Release Mechanism\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eReplacement Toilet Seat and Cover Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVendor Part Code\u003c\/th\u003e\n\u003ctd\u003eVETHATO001\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Which toilets does the VETUS HATO001 seat fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the factory replacement seat and cover for the Hato 1 and Hato 2 series electric marine toilets. It's built for those elongated, closed-front bowls, so the hinge holes and footprint line up as designed. It won't fit other toilet models.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it have soft-close hinges?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The lid eases down slowly and quietly on its own once you lower it, so there's no slamming when the boat rolls. That's a nice touch on an overnight when the crew's asleep.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does quick-release mean here?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The two hinges unclip so you can lift the whole seat off the bowl in seconds without tools. That lets you clean the bowl rim and hinge posts properly, then snap it back on.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the cover included?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, the seat comes with its matching cover. It's white plastic with no logo.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a complete toilet or just the seat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Just the seat and cover assembly. You keep your existing Hato 1 or Hato 2 base and pump. It's the part you replace when the original seat cracks, yellows, or the hinges wear out.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is it round or elongated?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Elongated with a closed front, matching the Hato 1 and Hato 2 bowls. The closed front also helps cut splash when the boat's working in a chop.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How hard is it to install?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Simple. Remove the old seat at the two rear mounts, line the new hinge posts up with the holes in the Hato bowl, and snug the fasteners down. No plumbing or sealant. About ten minutes with a basic wrench.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I make the seat last in a marine head?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Keep the cover down when it's not in use, especially in a head that gets direct sun through a hatch or port. Sun is hard on any plastic over time, and a closed cover keeps the top surface and hinges out of the worst of it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's it made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Molded plastic in white, with no logo. It wipes clean and handles the damp, salty air of a marine head.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"VETUS","offers":[{"title":"Default Title","offer_id":45059593994333,"sku":"2008452","price":114.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_84694481-24e0-4164-a27f-2d775819a21e.jpg?v=1789514497","url":"https:\/\/nvnmarine.com\/products\/vetus-hato001-soft-close-marine-toilet-seat-white","provider":"NVN Marine","version":"1.0","type":"link"}