Uflex TM87OX10 10 ft High Efficiency Rack & Pinion Steering Cable
Uflex TM87OX10 10 ft High Efficiency Rack & Pinion Steering Cable — Product description
The Uflex TM87OX10 is a 10 foot high efficiency rack and pinion steering cable built for front mount rack steering. Stainless steel output ends and corrosion resistant materials mean it's ready for salt and spray, and it's a straightforward swap when your old cable has gone stiff.
If your steering has gotten heavy, gritty, or just plain vague, the cable is usually the first place to look. The Uflex TM87OX10 is a 10 foot rack and pinion steering cable made for front mount rack steering systems. It's a high efficiency design, which in plain terms means less effort at the wheel and a cleaner feel when you turn.
Out on the water, steering cable lives a hard life. It sits in the bilge or behind a console, it gets wet, it gets salt on it, and it gets flexed every time you turn the wheel. Uflex builds the TM87 with stainless steel cable output ends and corrosion resistant materials throughout. That's the right way to build a cable that's going to be soaked for years. It won't make maintenance disappear, but it gives the cable a fair fight against the environment it's installed in.
The numbers that matter are simple. You get a 3.7 inch cable stroke and 3.3 turns lock-to-lock. That's a quick, responsive ratio for rack steering, so you're not winding the wheel round and round to make a tight turn at the dock. The cable bend radius is 7.9 inches. That's worth keeping in mind when you plan the route from helm to engine. Gentle sweeping curves keep the cable working smoothly, and tight kinks are what kill steering feel and shorten cable life.
This cable is sold as a cable only. The wheel is optional and sold separately, and the listing here is for the cable itself. Our distributor data lists it as a front mount rack and pinion setup with a 10 foot cable and a 90 degree bezel. If you're replacing an existing cable, check your current length before you order. Measure the actual route the old cable takes, not the straight line between the helm and the engine. Then match that length, because a cable that's too short won't reach and one that's far too long just adds slop and clutter behind the console.
The manufacturer describes the TM87 as a universal replacement for standard and non-feedback rack and pinion steering systems. It's also described as a fast, simple cable installation. In real life, that means a weekend job for most boat owners who are comfortable with basic hand tools. Take photos of the old routing before you pull anything. Note how the cable passes through the transom or console, and where it's secured. Put the new cable back along the same path and you've saved yourself a headache.
Safety matters here, and Uflex says so plainly. TM87 steering cables are not to be used on boats with engines that exceed the maximum horsepower rating of the boat. Check the capacity plate on your boat before you buy. The cable is listed as exceeding ISO 8848 and ABYC P17 safety standards, which is the kind of paper trail you want behind something that keeps your boat pointed where you want it.
Who's this for? Owners of smaller outboard boats with rack steering who are tired of a cable that binds or has started to feel notchy. It's also a good fit when you're refreshing a boat before the season and want one less thing to worry about at the ramp. If you're unsure whether your helm and engine setup is a match, ask our crew. We'd rather confirm fitment with you now than have you open the box and find it's wrong.
One more tip. When you install any steering cable, lubricate the engine end as the engine maker recommends and turn the wheel lock to lock before you leave the dock. Watch the engine move through its full travel, listen for any rub, and make sure nothing is pinching the cable. Five minutes of checking on the trailer beats finding a problem in open water.
Key Features
- 10 foot cable length, sized for front mount rack and pinion steering
- All stainless steel cable output ends, built to stand up to salt and moisture
- Corrosion resistant materials throughout for long life in a wet bilge or console
- 3.7 inch cable stroke for a direct, responsive feel
- 3.3 turns lock-to-lock, so tight turns at the dock don't mean a lot of wheel spinning
- 7.9 inch cable bend radius, which makes routing easy when you keep the curves gentle
- Exceeds ISO 8848 and ABYC P17 safety standards
- Universal replacement for standard and non-feedback rack and pinion steering systems
Why Buy from NVN Marine
- Authorized Uflex USA reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Uflex TM87 10' Rack & Pinion Steering Cable |
|---|---|
| Brand | Uflex USA |
| Manufacturer Part Number | TM87OX10 |
| UPC | 702755017417 |
| Cable Length | 10 ft |
| Steering Type | Rack and Pinion |
| Mount Type | Front Mount |
| Bezel | 90 Degree |
| Cable Stroke | 3.7 in |
| Turns Lock-to-Lock | 3.3 |
| Cable Bend Radius | 7.9 in |
| Cable Output Ends | All stainless steel |
| Safety Standards | Exceeds ISO 8848 and ABYC P17 |
| Weight | 8 lb |
| Package Dimensions (L x W x H) | 27.50 x 18.00 x 3.00 in |
Frequently asked questions
How long is the Uflex TM87OX10 steering cable?
It's a 10 foot cable. Measure the actual route your old cable follows, not the straight line, and match that length.
What type of steering system does this cable fit?
It's a front mount rack and pinion cable. The manufacturer describes it as a universal replacement for standard and non-feedback rack and pinion steering systems.
How many turns lock-to-lock?
3.3 turns lock-to-lock, with a 3.7 inch cable stroke.
What's the minimum bend radius?
The cable bend radius is 7.9 inches. Keep your routing in gentle curves and avoid kinks.
Is the cable made for saltwater use?
The output ends are all stainless steel and the cable is made of corrosion resistant materials, so it's designed for the marine environment.
Does it meet any safety standards?
Uflex lists the TM87 as exceeding ISO 8848 and ABYC P17 safety standards.
Is a steering wheel included?
No. The wheel is optional and sold separately. This listing is for the steering cable only.
Can I use it on any size engine?
No. Don't use TM87 cables on a boat with an engine that exceeds the boat's maximum horsepower rating. Check your boat's capacity plate.
How much does the box weigh and how big is it?
Shipping weight is 8 pounds, and the box measures 27.5 x 18 x 3 inches.