Uflex USA MTCP912RJ Compact Electric Trim Tab Kit 9x12
Uflex USA MTCP912RJ Compact Electric Trim Tab Kit 9x12 — Product description
The Uflex USA MTCP912RJ is a compact electric trim tab kit for 16 to 25 foot boats. It pairs polished 9 by 12 inch stainless steel tabs with 12V electromechanical actuators and a round stick helm control, so you get faster planing, a smoother ride, and better fuel economy without any hydraulic pumps or fluid lines to maintain.
A boat that won't get on plane cleanly, that leans in a crosswind, or that plows with a heavy stern is burning fuel and beating up everyone aboard. The Uflex USA MTCP912RJ compact trim tab kit fixes all of that. It's a complete electric trim tab system sized for boats in the 16 to 25 foot range, and it gives you fingertip control over how your hull rides so every run is faster to plane, flatter through the water, and more comfortable for your crew.
Trim tabs work by pushing down on the water at the transom, which lifts the stern and drops the bow. That simple action does a lot. It shortens the time and distance it takes to climb onto plane, it holds the boat level when weight shifts from side to side, and it keeps the bow from riding too high once you're up to speed. Dial the tabs in and you'll often see the boat settle onto plane at a lower speed, which means the engine works less and you burn less fuel to cover the same water.
This kit is built around a pair of polished stainless steel tabs measuring 9 by 12 inches, a good size for the boats it's designed for. Stainless is the right material at the transom because it shrugs off saltwater, spray, and the constant wet-dry cycling that eats cheaper hardware. The polished finish looks sharp on the back of the boat and holds up season after season.
What makes this kit compact is the drive. Instead of a hydraulic pump, reservoir, and fluid lines, the MTCP912RJ uses electromechanical AC12 actuators that run on 12V DC. That's a big deal for the installer and the owner. There's no hydraulic fluid to bleed, no lines to route and worry about, and no pump to find space for. The actuators mount cleanly and the whole system draws power from your existing 12V electrical system. For a lot of trailer boats and smaller center consoles, this is the simplest, cleanest way to add real trim control.
At the helm you get a round stick control that puts bow-up and bow-down trim right under your thumb. It's intuitive to use on the fly, so you can trim as conditions change without taking your eyes off the water. Adjust the tabs as you accelerate onto plane, tap in a little correction when a passenger moves or the wind picks up, and ease them off when you want the bow to rise in a following sea. An integrated LED indicator gives you feedback so you always know roughly where the tabs are set.
Installation is straightforward for a capable owner. The tabs bolt to the transom, the compact actuators connect to the tabs, and the wiring harness runs forward to the round stick control at the helm and to a 12V source. Plan your transom layout so the tabs sit clear of the running gear and get even bite on both sides, and route the harness cleanly along with your other rigging. Take your time with the transom holes and sealing, and you'll have a system that stays dry and trouble-free.
Who should run this kit? It's for the owner of a 16 to 25 foot boat who wants better performance without the cost and complexity of a hydraulic setup. If your boat is slow to plane, rides bow-high, or lists with an uneven load, a set of trim tabs is one of the highest-value upgrades you can make. You'll feel the difference the first time out, and you'll appreciate it every trip after. The Uflex MTCP912RJ delivers that ride improvement in a clean, compact, all-electric package.
Key Features
- Complete compact electric trim tab kit for boats from 16 to 25 feet
- Pair of polished stainless steel tabs sized 9 by 12 inches for salt-water durability
- Electromechanical AC12 actuators run on 12V DC, no hydraulic pump or fluid lines
- Round stick helm control puts bow-up and bow-down trim under your thumb
- Integrated LED indicator gives feedback on tab position
- Faster time to plane and lower planing speed for better fuel economy
- Levels the boat when weight shifts side to side or the wind picks up
- Draws power from your existing 12V electrical system
- Clean, compact install compared with hydraulic trim systems
- Wiring harness included to connect actuators to the helm control
Why Buy from NVN Marine
- Authorized Uflex USA reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Uflex USA MTCP912RJ Compact Electric Trim Tab Kit |
|---|---|
| Brand | Uflex USA |
| Manufacturer Part Number | MTCP912RJ |
| UPC | 702755047322 |
| Product Type | Electric trim tab kit |
| Boat Size Range | 16 to 25 ft |
| Tab Size | 9 in x 12 in |
| Tab Material | Polished stainless steel |
| Actuator | AC12 compact electromechanical |
| Voltage | 12V DC |
| Helm Control | Round stick control |
| Position Indicator | Integrated LED |
| Wiring Harness | Included, approx. 3.28 ft |
| In the Box | Pair of tabs, 2 actuators, control, hardware |
Frequently asked questions
What size boat is the MTCP912RJ trim tab kit for?
It's designed for boats in the 16 to 25 foot range. The 9 by 12 inch tabs and compact 12V actuators are matched to that size of hull for effective, balanced trim control.
Is this a hydraulic or electric trim tab system?
It's electric. The kit uses electromechanical AC12 actuators that run on 12V DC, so there's no hydraulic pump, reservoir, or fluid lines to install or maintain. It draws power from your existing 12V electrical system.
What do trim tabs actually do?
They push down on the water at the transom, which lifts the stern and drops the bow. That gets you on plane faster and at a lower speed, levels the boat when weight or wind shifts, and keeps the bow from riding too high, which improves comfort and fuel economy.
What comes in the kit?
You get a pair of polished stainless steel 9 by 12 inch tabs, two AC12 compact electromechanical actuators with a wiring harness, and a round stick helm control, along with the mounting hardware to install them.
How do I control the tabs while running?
A round stick control at the helm lets you trim bow-up or bow-down with your thumb, on the fly. An integrated LED indicator shows roughly where the tabs are set so you can fine-tune as conditions change.
Why are the tabs made of stainless steel?
Stainless steel handles saltwater, spray, and constant wet-dry cycling at the transom far better than cheaper hardware. The polished finish looks clean on the back of the boat and holds up season after season.
Can I install this kit myself?
Many capable owners do. The tabs bolt to the transom, the actuators connect to the tabs, and the harness runs forward to the round stick control and a 12V source. Plan the transom layout so the tabs clear the running gear and bite evenly, and seal the transom holes carefully.
Will trim tabs help my boat get on plane?
Yes. That's one of their main jobs. By lifting the stern, the tabs shorten the time and distance it takes to climb onto plane and often let the boat settle onto plane at a lower speed, which means the engine works less and you burn less fuel.
