Thetford 34100 Water Valve Kit for Aqua-Magic Style Plus & Lite
Thetford 34100 Water Valve Kit for Aqua-Magic Style Plus & Lite — Product description
The Thetford 34100 is the genuine replacement water valve kit for Aqua-Magic Style Plus and Style Lite RV toilets. It comes with the valve sub-assembly, drive arm, clamp, mounting screws, and a closet flange seal, so you have everything to fix a weak or leaking flush in one afternoon.
When the water valve on your Aqua-Magic Style Plus or Style Lite quits, you notice fast. A weak flush, water that won't shut off, or a bowl that never quite fills. This is the genuine Thetford 34100 kit that puts it right, and it's the same valve assembly the toilet left the factory with.
The kit covers the whole job, not just one worn piece. You get the water valve sub-assembly, the drive arm that opens the valve when you work the flush, a clamp, the mounting screws, and a closet flange seal so you can reseal the base connection while you're in there. That last part matters. Anytime you pull the toilet to reach the valve, replacing the flange seal is cheap insurance against a leak at the floor.
This valve is specific to the Aqua-Magic Style Plus and Style Lite permanent toilets, the floor-mounted units found in a lot of travel trailers and fifth wheels. It isn't the right valve for other Aqua-Magic models, so match your toilet before you order. If you're not sure which Style you have, the model is usually printed on a label under the seat or on the base.
Install is a straightforward afternoon job for most owners. Shut off the water, disconnect the supply line, and the valve comes out with the clamp and screws in the kit going right back where the old ones were. Because it's a genuine Thetford part, the drive arm lines up with the flush mechanism the way it should, so you're not fighting fitment or shimming anything to make it work.
Keep one on the shelf if you full-time or take long trips. A water valve is one of those parts that fails at the worst time, and having the correct 34100 kit on hand beats hunting for RV toilet parts on the road.
Key Features
- Genuine Thetford water valve kit (part 34100), a direct replacement for Aqua-Magic Style Plus and Style Lite permanent toilets
- Includes the complete water valve sub-assembly, so you replace the whole flow-control unit instead of chasing a single worn washer
- Water valve drive arm included, the linkage that opens the valve when you work the flush
- Clamp and mounting screws come in the box, so you have the hardware to bolt the valve back in place
- Closet flange seal included, letting you reseal the toilet-to-floor connection during the repair
- Factory-matched OEM part, so the drive arm and mounting points line up with the flush mechanism without shimming
Why Buy from NVN Marine
- Authorized Thetford Marine reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Thetford 34100 Water Valve Kit for Aqua-Magic Style Plus & Style Lite Toilets |
|---|---|
| Brand | Thetford |
| Manufacturer Part Number | 34100 |
| UPC | 028985341000 |
| Component Type | Water Valve Replacement Kit |
| Compatible Toilets | Aqua-Magic Style Plus, Aqua-Magic Style Lite |
| Kit Contents | Water Valve Sub-Assembly, Water Valve Drive Arm, Clamp, Mounting Screws, Closet Flange Seal |
| Toilet Type | Permanent (floor-mounted) RV toilets |
Frequently asked questions
Which toilets does the Thetford 34100 water valve fit?
It's built for the Aqua-Magic Style Plus and Style Lite permanent (floor-mounted) toilets. It isn't the correct valve for other Aqua-Magic models, so check your toilet model before ordering.
What comes in the kit?
You get the water valve sub-assembly, the water valve drive arm, a clamp, mounting screws, and a closet flange seal. That's everything to swap the valve and reseal the base.
What does the water valve actually do?
It controls the water flowing into the bowl when you flush. When it wears out you'll usually see a weak flush, a bowl that won't fill, or water that keeps trickling after you let off the flush.
Does the kit include the closet flange seal?
Yes. The flange seal is in the box, so you can reseal the toilet-to-floor connection while you have the toilet pulled for the repair.
Is this a genuine Thetford part?
Yes. This is the genuine Thetford part number 34100, matched to the factory specification for the Style Plus and Style Lite toilets.
How hard is it to install?
For most owners it's a straightforward afternoon job. Shut off the water, disconnect the supply line, and the clamp and screws in the kit go back where the old ones were.