Tekonsha T-One ModuLite Harness 2019 Ford Edge 118805
Tekonsha T-One ModuLite Harness 2019 Ford Edge 118805 — Product description
The Tekonsha 118805 T-One connector assembly wires up your 2019 Ford Edge for towing without cutting a single factory wire. It plugs straight into the Edge's harness and gives you a clean 4-way flat trailer connector out back. The upgraded circuit-protected ModuLite module pulls power right from the battery, so your trailer lights stay bright and your vehicle's wiring stays protected.
If you've got a 2019 Ford Edge and you want to pull a small trailer behind it, the Tekonsha 118805 T-One connector assembly is the clean way to wire it. It's cut to fit the Edge specifically, so it plugs right into the factory tow wiring under the back of the vehicle. No splicing, no scotch-locks, no guessing which wire is which. You connect it where it's meant to go and you're done.
What makes this one worth the money is the upgraded ModuLite module built into the assembly. A lot of basic connectors just tap the vehicle's taillight circuit and hope it can carry the load. This one doesn't. The circuit-protected ModuLite module pulls power straight from the battery to run the trailer lights, and it keeps that circuit isolated from your Edge's own wiring. So if something on the trailer shorts out, a corroded bulb socket, a pinched wire, a bad ground, the module takes the hit instead of your vehicle's electronics.
The output is a standard 4-way flat connector, which is what most small utility trailers, cargo trailers, and light boat trailers use. It carries running lights, left and right turn signals, and brake lights. The module reads the Edge's separate turn and stop signals and combines them into the single signal a 4-flat trailer expects, so your blinkers and brake lights behave the way they should on the trailer end.
Because the ModuLite module powers the lights directly, it drives LED and incandescent trailer lights without the flicker or false readings you sometimes get from a plain circuit tap. That matters more every year as trailer lighting moves to LED. If you're towing a small aluminum fishing boat, a utility trailer for the yard, or a cargo trailer, this gives you reliable, code-legal lighting without touching the Edge's factory harness.
One note on fit. This assembly is built for the 2019 Ford Edge. If you're on a different year or a different vehicle, check that the part matches before you order, because the T-One connectors are vehicle-specific by design.
Key Features
- Custom-fit T-One connector for the 2019 Ford Edge, plugs into the factory tow wiring with no cutting or splicing
- Circuit-protected ModuLite module draws power straight from the battery, keeping trailer lights bright and vehicle wiring isolated
- 4-way flat output connector, the standard for small utility, cargo, and light boat trailers
- Combines the Edge's separate turn and stop signals into the single signal a 4-flat trailer needs
- Upgraded circuit protection guards the tow vehicle's electronics against shorts and overloads at the trailer
- Powers LED and incandescent trailer lights directly, avoiding the flicker of a plain circuit tap
Why Buy from NVN Marine
- Authorized Tekonsha reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | T-One Connector Assembly With Upgraded Circuit Protected ModuLite Module |
|---|---|
| Brand | Tekonsha |
| Manufacturer Part Number | 118805 |
| UPC | 016118154092 |
| Vehicle Fitment | 2019 Ford Edge |
| Connector Type | 4-Way Flat |
| Module Type | Circuit-Protected ModuLite |
| Installation | Plug-in T-connector, no splicing |
| Power Source | Direct from vehicle battery |
Frequently asked questions
Will this fit my 2019 Ford Edge?
Yes. The 118805 is a T-One connector assembly cut specifically for the 2019 Ford Edge. It plugs into the factory tow wiring, so there's no cutting or splicing to make it fit.
Do I have to cut any factory wires to install it?
No. That's the point of a T-One connector. It plugs into the Edge's existing wiring where it's designed to go, so you keep the factory harness intact.
What kind of trailer plug does it give me?
A standard 4-way flat connector at the rear. That covers running lights, left and right turn signals, and brake lights on most small utility, cargo, and light boat trailers.
What does the ModuLite module actually do?
It pulls power for the trailer lights straight from the vehicle battery instead of tapping the taillight circuit. It's circuit-protected, so a short or fault on the trailer side takes the hit rather than your Edge's electronics.
Will it work with LED trailer lights?
Yes. Because the ModuLite module powers the lights directly from the battery, it drives both LED and incandescent trailer lights without the flicker or false signals you can get from a plain circuit tap.
Can I tow a small boat trailer with this?
Yes, as long as you stay within the Edge's rated towing capacity. The 4-way flat connector is the standard plug for small aluminum fishing boat trailers and utility trailers.
