Tekonsha 118847 T-One 4-Way Flat Connector, 2021 Jeep Cherokee
Tekonsha 118847 T-One 4-Way Flat Connector, 2021 Jeep Cherokee — Product description
The Tekonsha 118847 gives your 2021 Jeep Cherokee a clean, plug-in trailer wiring connection with a circuit-protected ModuLite HD module doing the heavy lifting. It converts the Jeep's separate turn and stop signals into a standard 4-way flat output, and it pulls power straight from the battery so your factory wiring stays protected. No wire stripping, no splicing.
If you tow anything small behind a 2021 Jeep Cherokee, a utility trailer, a pair of bikes on a lighted rack, a little pop-up, this is the wiring setup that gets your lights talking without touching a wire stripper. The Tekonsha 118847 is a vehicle-specific T-One connector paired with a circuit-protected ModuLite HD module. It's built to drop right into the Cherokee's factory harness and give you a clean 4-way flat output at the back.
The T-One part is what makes install painless. It's a plug-in harness shaped to match the Jeep's existing wiring connectors, so you're not stripping wires or chasing down splice points under the bumper. You unplug a factory connector, you plug the T-One in between, and that part's done. Most folks have it in and tested in well under an hour.
The ModuLite HD module is the brains. Modern vehicles run separate turn and brake signals, and a trailer's 4-way flat needs those combined. The module handles that conversion, and it does it the smart way, by pulling power directly from the Jeep's battery instead of leaning on the vehicle's light circuits. That means your factory bulbs and modules aren't carrying the trailer's load. Built-in circuit protection guards against shorts and overloads, so a bad trailer ground or a pinched wire won't take out your Jeep's electrical.
What's it good for? Light-duty towing where you need turn signals, brake lights, running lights, and tail lights on the trailer. Think utility trailers, small campers, bike and cargo racks, anything that runs a standard 4-way flat plug. It's matched to the 2021 Jeep Cherokee, so you're getting the right connector the first time instead of guessing with a universal kit. If you're towing something that needs its own brakes or a 7-way round connection, that's a different setup. But for straightforward flat-four towing, this is exactly the piece you want.
Key Features
- Vehicle-specific T-One connector plugs into the 2021 Jeep Cherokee's factory harness, so there's no wire stripping or splicing to install.
- Circuit-protected ModuLite HD module guards your Jeep's electrical against trailer shorts and overloads.
- Powered converter draws from the vehicle battery instead of the light circuits, keeping factory bulbs and modules off the trailer's load.
- 4-way flat output runs trailer turn signals, brake lights, running lights, and tail lights.
- Converts the Cherokee's separate turn and stop signals into the combined signal a 4-way flat trailer needs.
- Matched to the 2021 Jeep Cherokee for a correct fit the first time, no universal-kit guesswork.
Why Buy from NVN Marine
- Authorized Tekonsha reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | T-One Connector Assembly With Circuit Protected Modulite HD Module, 4-Way Flat |
|---|---|
| Brand | Tekonsha |
| Manufacturer Part Number | 118847 |
| UPC | 016118162110 |
| Connector Output | 4-Way Flat |
| Wiring Harness Type | T-One vehicle-specific connector |
| Converter Module | Circuit Protected ModuLite HD |
| Circuit Protection | Built-in |
| Power Source | Vehicle battery (powered converter) |
| Vehicle Application | 2021 Jeep Cherokee |
| Installation | Plug-in, no wire stripping or splicing |
Frequently asked questions
Does the 118847 fit my vehicle?
It's built specifically for the 2021 Jeep Cherokee, plugging into that model's factory wiring harness.
What kind of trailer connector do I get?
A 4-way flat connector, which carries running and tail lights, left turn and brake, right turn and brake, and a ground across four pins.
Do I need to cut or splice any wires?
No. The T-One connector is a plug-in harness that mates with the Jeep's existing connectors, so it installs without stripping or splicing.
What does the ModuLite HD module do?
It converts the vehicle's separate turn and stop signals into the combined 4-way flat trailer signal, and it draws power from the battery to protect the factory wiring. Built-in circuit protection guards against shorts and overloads.
Can I tow a trailer with its own brakes using this?
No. This is a lighting connection with a 4-way flat output. Trailers with electric brakes need a brake controller and a 7-way connection, which is a different setup.
Will this overload my Jeep's electrical system?
That's exactly what the powered ModuLite HD module prevents. It pulls trailer power from the battery rather than the vehicle's light circuits, and circuit protection shields against overloads.