{"product_id":"tekonsha-118769-t-one-harness-mitsubishi-mirage","title":"Tekonsha 118769 T-One Harness | Mitsubishi Mirage","description":"\u003cp class=\"nvn-hero\"\u003eTekonsha's 118769 T-One connector wires your Mitsubishi Mirage for towing in minutes. It plugs straight into the factory harness behind the bumper, no cutting or splicing, and runs power through an upgraded Circuit Protected ModuLite HD module that pulls current right from the battery. You get a clean 4-way flat output ready for a small trailer's running, turn, and brake lights.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you tow a small utility trailer, a bike rack, or a lightweight pop-up behind your Mitsubishi Mirage, this is the harness that gets you wired without touching a single factory wire. The Tekonsha 118769 is a T-One connector paired with the upgraded Circuit Protected ModuLite HD module, and it's built specifically to plug into the Mirage's existing lighting harness.\u003c\/p\u003e\n\u003cp\u003eHere's how it works. The T-One side is a vehicle-specific connector. You find the factory plug behind the rear bumper, unplug it, and slot the T-One in between. No splicing, no scotch-locks, no test light hunting for the right wire. That plug-and-play fit is the whole point. It keeps the factory wiring intact, which matters if you ever want to remove the harness or you care about your warranty.\u003c\/p\u003e\n\u003cp\u003eThe ModuLite HD module is the brain of it. Instead of stealing power from the taillight circuit, it draws current straight from the battery and uses the vehicle's own signals only as triggers. That means your trailer lights get full, steady power, and your Mirage's own bulbs and computer never see the extra load. It converts the Mirage's separate turn and stop signals into the combined 4-way flat output a small trailer needs, covering running lights, left turn\/brake, right turn\/brake, and ground.\u003c\/p\u003e\n\u003cp\u003eThe Circuit Protected part is the upgrade worth having. The module has built-in, self-resetting protection. If your trailer wiring shorts out, corrodes, or a bulb fails, the module trips instead of frying the vehicle's electrical system. Once you fix the fault, it resets on its own. It also handles both incandescent and LED trailer lights, so you're covered whether you're running an old steel utility trailer or a newer LED-lit one.\u003c\/p\u003e\n\u003cp\u003eThis is automotive trailer wiring, not marine, so it lives back by the hitch. Installation is genuinely a driveway job for most folks. Before you buy, double-check that 118769 matches your exact Mirage year and trim, since Tekonsha builds these connectors model-specific. Get the right one and you'll be plugged in and towing in about the time it takes to have a coffee.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eVehicle-specific T-One connector plugs directly into the Mitsubishi Mirage's factory wiring, no splicing or cutting\u003c\/li\u003e\n  \u003cli\u003eUpgraded Circuit Protected ModuLite HD module draws power straight from the battery for full, steady trailer light output\u003c\/li\u003e\n  \u003cli\u003eSelf-resetting circuit protection trips on a trailer short or fault, then resets once it's fixed, shielding the vehicle's electrical system\u003c\/li\u003e\n  \u003cli\u003eStandard 4-way flat output covers running lights, left and right turn\/brake, and ground for small trailers\u003c\/li\u003e\n  \u003cli\u003eWorks with both incandescent and LED trailer lights\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play install keeps the factory harness intact for easy removal down the road\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Tekonsha reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill the 118769 fit my Mitsubishi Mirage?\u003c\/summary\u003e\n    \u003cp\u003eIt's built as a vehicle-specific T-One connector for the Mitsubishi Mirage. Tekonsha makes these model-specific, so confirm 118769 matches your exact year and trim before you buy.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I have to cut or splice any wires?\u003c\/summary\u003e\n    \u003cp\u003eNo. The T-One connector plugs into the factory harness behind the rear bumper. You unplug the factory connector, slot the T-One in between, and you're done. No splicing needed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does the ModuLite HD module actually do?\u003c\/summary\u003e\n    \u003cp\u003eIt's a powered converter. Instead of pulling power from the taillight circuit, it draws current directly from the battery and uses the vehicle's signals as triggers. That gives your trailer lights full power without loading the Mirage's own circuits.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat kind of trailer connector does this give me?\u003c\/summary\u003e\n    \u003cp\u003eA 4-way flat. That covers running lights, left turn\/brake, right turn\/brake, and ground, which is what most small utility trailers, bike racks, and lightweight campers use.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat happens if my trailer wiring shorts out?\u003c\/summary\u003e\n    \u003cp\u003eThe Circuit Protected module has built-in self-resetting protection. If there's a short or a fault, it trips to protect the vehicle's electrical system, then resets on its own once you fix the problem.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it work with LED trailer lights?\u003c\/summary\u003e\n    \u003cp\u003eYes. The ModuLite HD module handles both incandescent and LED trailer lights, so you don't need a separate LED converter.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eT-One Connector Assembly With Upgraded Circuit Protected ModuLite HD Module\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTekonsha\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e118769\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e016118146554\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eVehicle Fitment\u003c\/th\u003e\n\u003ctd\u003eMitsubishi Mirage\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnector Type\u003c\/th\u003e\n\u003ctd\u003eT-One plug-in (vehicle-specific)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTrailer Output\u003c\/th\u003e\n\u003ctd\u003e4-Way Flat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConverter Module\u003c\/th\u003e\n\u003ctd\u003eCircuit Protected ModuLite HD\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWiring Method\u003c\/th\u003e\n\u003ctd\u003ePlug-in, no splicing required\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCircuit Protection\u003c\/th\u003e\n\u003ctd\u003eSelf-resetting, built in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBulb Compatibility\u003c\/th\u003e\n\u003ctd\u003eIncandescent and LED trailer lights\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eAutomotive trailer tow wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will the 118769 fit my Mitsubishi Mirage?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's built as a vehicle-specific T-One connector for the Mitsubishi Mirage. Tekonsha makes these model-specific, so confirm 118769 matches your exact year and trim before you buy.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I have to cut or splice any wires?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The T-One connector plugs into the factory harness behind the rear bumper. You unplug the factory connector, slot the T-One in between, and you're done. No splicing needed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does the ModuLite HD module actually do?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a powered converter. Instead of pulling power from the taillight circuit, it draws current directly from the battery and uses the vehicle's signals as triggers. That gives your trailer lights full power without loading the Mirage's own circuits.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What kind of trailer connector does this give me?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A 4-way flat. That covers running lights, left turn\/brake, right turn\/brake, and ground, which is what most small utility trailers, bike racks, and lightweight campers use.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What happens if my trailer wiring shorts out?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The Circuit Protected module has built-in self-resetting protection. If there's a short or a fault, it trips to protect the vehicle's electrical system, then resets on its own once you fix the problem.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it work with LED trailer lights?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The ModuLite HD module handles both incandescent and LED trailer lights, so you don't need a separate LED converter.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"TEKONSHA","offers":[{"title":"Default Title","offer_id":45067193778269,"sku":"2008947","price":61.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_641bad48-659a-4071-870a-3ebaa5b957ab.jpg?v=1789661458","url":"https:\/\/nvnmarine.com\/products\/tekonsha-118769-t-one-harness-mitsubishi-mirage","provider":"NVN Marine","version":"1.0","type":"link"}