Taylor Made Small Edge Guard, White 10 ft | 46086
Taylor Made Small Edge Guard, White 10 ft | 46086 — Product description
Taylor Made's Small Edge Guard is a 10-foot coil of white double molded vinyl that covers the raw, exposed edges on your boat. It screws or nails over hatch lips, storage lockers, and console cutouts to give them a clean, finished edge that won't nick your hands or chip the gelcoat.
Taylor Made's Small Edge Guard is the simple fix for every raw, exposed edge on your boat that catches a knuckle or just looks unfinished. It's a 10-foot coil of white double molded vinyl that slips over the lip of hatches, storage lockers, splash wells, and console cutouts, giving them a clean, finished edge that won't nick your hands or chip your gelcoat. If you've ever run your palm along a cut fiberglass edge and felt that sharp lip, you already know why this stuff exists.
The double molded construction is what makes it work. There's a firmer inner core that grips the edge and holds its shape, wrapped in a softer outer skin that stays flexible and takes the bends without cracking. That combination lets you run it around a tight radius on a hatch corner without it kinking or popping back off. It sits tight and looks like it belongs there.
This is the screw or nail mount version, so it's built to be fastened down rather than just pressed on. You lay it along the edge, then set your fasteners through the base at regular intervals. On a fiberglass edge that means pre-drilling and a stainless screw. On a plywood hatch or a wood trailer bunk, a nail holds it fine. Ten feet covers most single hatches or lockers with a little to spare, and you can trim it to length with a sharp utility knife.
It's a small-profile guard, so it's meant for lighter edges, not for wrapping a thick gunwale or a heavy deck lid. If you're finishing out a project boat, restoring an older hull, or you're just tired of the sharp edge on a storage compartment, this is the trim that does it. White blends into most decks, and Taylor Made has been building marine vinyl like this for decades, so it's made to live outdoors in sun and spray.
Key Features
- 10-foot coil of double molded vinyl, enough to trim most single hatches or lockers with length to spare
- Double molded construction pairs a firm inner core with a flexible outer skin, so it grips the edge and still bends around tight corners
- Screw and nail mount base fastens down for a guard that won't work loose in chop
- White finish blends into most gelcoat decks and stays neutral against any hull color
- Small profile sized for lighter edges like hatch lips, storage lockers, splash wells, and console cutouts
- Covers raw fiberglass and cut edges to protect your hands and stop gelcoat chipping
- Trims to length with a standard utility knife for a clean custom fit
Why Buy from NVN Marine
- Authorized Taylor Made reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Small Edge Guard; 10 Foot Length Coil; White; Double Molded Vinyl; Screw/ Nail Mount |
|---|---|
| Brand | Taylor Made |
| Manufacturer Part Number | 46086 |
| UPC | 040011460868 |
| Length | 10 ft coil |
| Color | White |
| Material | Double Molded Vinyl |
| Mounting | Screw/Nail Mount |
| Profile Size | Small |
| Product Type | Edge Guard |
Frequently asked questions
What is this edge guard used for?
It covers raw, exposed edges on your boat, hatch lips, storage lockers, splash wells, and console cutouts. It gives them a finished look and keeps a sharp fiberglass edge from cutting your hands or chipping.
How does it mount?
This is the screw or nail mount version. You lay it along the edge and fasten it down through the base at regular intervals. Pre-drill and use a stainless screw on fiberglass, or set a nail on plywood and wood trailer bunks.
What does double molded vinyl mean?
It's built from two vinyl densities. A firmer inner core grips the edge and holds shape, and a softer outer skin stays flexible so it bends around corners without cracking.
How much length do I get?
It's a 10-foot coil. That covers most single hatches or storage lockers with a little to spare.
Can I cut it to length?
Yes. Trim it to length with a sharp utility knife for a clean custom fit before you fasten it down.
Will it hold up outdoors?
It's marine vinyl built to live outside in sun and spray. Taylor Made has been making trim like this for decades, so it's meant for on-the-water use, not indoor-only trim.
