{"product_id":"taylor-made-platinum-lounge-seat-433042-square-corner","title":"Taylor Made Platinum Series Square Corner Lounge Seat, Beige","description":"\u003cp class=\"nvn-hero\"\u003eThe Taylor Made Platinum Series square corner lounge seat is the corner piece that anchors an L-shaped layout on your pontoon or deck boat. Rotationally molded polyethylene base, marine vinyl over mildew-resistant foam, and UV-resistant stitching. No plywood to rot, no steel to rust. Built to sit out there and take it, season after season.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Taylor Made Platinum Series square corner lounge seat is a corner module built for pontoons and deck boats where you want real, permanent seating that stands up to the water. It measures 32 inches long by 22 inches wide by 30 inches tall and comes finished in beige marine vinyl. The square corner shape is the piece you drop into an L-shaped bow or stern layout, tying two straight sections together into one continuous lounge.\u003c\/p\u003e\n\u003cp\u003eWhat sells us on the Platinum Series is the base. Taylor Made rotationally molds the frame from marine grade polyethylene, so there's no plywood in there to soak up water and rot out on you. That's the part that kills cheaper boat furniture. Wood cores swell, delaminate, and turn to mush after a couple of wet seasons. This poly frame just shrugs it off. Hose it down, leave it out in the rain, it doesn't care.\u003c\/p\u003e\n\u003cp\u003eThe upholstery is built to the same standard. Marine grade vinyl over mildew-resistant polyurethane foam, stitched with polyester UV-resistant thread. That thread matters more than most people think. Cheap thread is usually the first thing to fail on a boat seat. The stitching rots in the sun long before the vinyl does, and then the seams open up and the foam gets wet. UV-resistant thread holds those seams together season after season. The foam resists the mildew that loves a damp cushion, though like any marine cushion you'll still want to wipe it down and let it breathe when the boat's covered.\u003c\/p\u003e\n\u003cp\u003eUnderneath, the seat base is hinged on aluminum hinges, so the cushion flips up and you get at the storage void inside the molded base. Aluminum instead of steel means the hinges won't rust and seize on you. The staples and mounting fasteners are stainless too. Small details, sure, but they're the ones that decide whether a seat still works after five years or turns into a corroded mess.\u003c\/p\u003e\n\u003cp\u003eFitment is the thing to think through before you order. The 32 by 22 inch footprint drops nicely into corner seating on most 22 to 25 foot pontoons and deck boats. On a narrow 20 foot pontoon it can overhang the deck, so measure your corner before you commit. The seat stands 30 inches tall, standard lounge height, but on a low-profile runabout with a short windshield keep an eye on sight lines from the helm. Because it's a square corner unit, it's designed to sit between two straight lounge sections. Pair it with matching Taylor Made straight seats on the factory mounting pattern and you get a clean, modular L that looks like it came from the builder.\u003c\/p\u003e\n\u003cp\u003eA word on installation. The molded base comes with mounting points, but you're responsible for doing the mount right. On a thin console or deck floor, back up the bolts with a plate or a large fender washer so you don't crack the fiberglass under load. Seal every fastener that goes through the deck with butyl tape or a good marine sealant, because water finds its way into any unsealed hole and rots the floor from underneath. Do that part right and this seat isn't going anywhere.\u003c\/p\u003e\n\u003cp\u003eBe clear on what this is and isn't. It's a fixed corner lounge. It's non-adjustable and non-foldable, and it ships without a headrest, so the back stays at a set recline. That's exactly what you want in a permanent corner module. It's not a captain's chair and it's not trying to be. If you need a reclining or pedestal helm seat, that's a different part. But for building out durable, good-looking lounge seating that survives real marine use, the Platinum Series corner seat is the piece that anchors the whole layout.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eRotationally-molded marine grade polyethylene frame, no plywood core to soak up water and rot\u003c\/li\u003e\n  \u003cli\u003eMarine grade vinyl upholstery over mildew-resistant polyurethane foam\u003c\/li\u003e\n  \u003cli\u003ePolyester UV-resistant thread keeps the seams from failing in the sun\u003c\/li\u003e\n  \u003cli\u003eSquare corner shape ties two straight lounge sections into a clean L-shaped layout\u003c\/li\u003e\n  \u003cli\u003e32 in L x 22 in W x 30 in H, fits corner seating on most 22 to 25 ft pontoons and deck boats\u003c\/li\u003e\n  \u003cli\u003eHinged seat base on aluminum hinges lifts for access to the interior storage void\u003c\/li\u003e\n  \u003cli\u003eStainless steel staples and mounting fasteners resist corrosion\u003c\/li\u003e\n  \u003cli\u003eBeige marine vinyl finish\u003c\/li\u003e\n  \u003cli\u003eNon-adjustable, non-foldable fixed corner module, ships without headrest\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Taylor Made reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat boats does this corner seat fit?\u003c\/summary\u003e\n    \u003cp\u003eThe 32 by 22 inch footprint fits corner seating on most 22 to 25 foot pontoons and deck boats. On a narrow 20 foot pontoon it can overhang the deck, so measure your corner before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs there plywood in the frame?\u003c\/summary\u003e\n    \u003cp\u003eNo. Taylor Made rotationally molds the frame from marine grade polyethylene, so there's no wood core to soak up water, swell, or rot out over a few wet seasons.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes the seat have storage inside?\u003c\/summary\u003e\n    \u003cp\u003eYes. The seat base is hinged on aluminum hinges, so the cushion flips up and you can get at the storage void inside the molded base.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is it?\u003c\/summary\u003e\n    \u003cp\u003eBeige. The upholstery is marine grade vinyl over mildew-resistant polyurethane foam.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I adjust, recline, or fold it?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is a fixed corner module. It's non-adjustable and non-foldable, and it ships without a headrest, so the back stays at a set recline. If you need a reclining or pedestal helm seat, that's a different part.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I mount it so it holds up?\u003c\/summary\u003e\n    \u003cp\u003eThe molded base has mounting points. On a thin console or deck floor, back the bolts with a plate or a large fender washer so you don't crack the fiberglass, and seal every fastener with butyl tape or marine sealant so water can't get into the deck.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill the vinyl and stitching survive the sun?\u003c\/summary\u003e\n    \u003cp\u003eThe seat uses marine grade vinyl and polyester UV-resistant thread, which is the part that usually fails first on cheaper seats. Wipe it down and let it breathe under a cover when you can to get the most life out of it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the exact dimensions?\u003c\/summary\u003e\n    \u003cp\u003e32 inches long by 22 inches wide by 30 inches tall overall.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with the matching straight sections?\u003c\/summary\u003e\n    \u003cp\u003eNo, this is sold as a single square corner unit. It's designed to sit between matching Taylor Made straight lounge sections on the factory mounting pattern to build out an L-shaped layout.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eTaylor Made Platinum Series Square Corner Lounge Seat, Beige\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTaylor Made\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e433042\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e848150042187\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003ePlatinum Series\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeat Type\u003c\/th\u003e\n\u003ctd\u003eLounge Seat\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCorner Style\u003c\/th\u003e\n\u003ctd\u003eSquare Corner\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall Dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e32 in x 22 in x 30 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBeige\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFrame Material\u003c\/th\u003e\n\u003ctd\u003eRotationally-Molded Marine Grade Polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUpholstery\u003c\/th\u003e\n\u003ctd\u003eMarine Grade Vinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFoam\u003c\/th\u003e\n\u003ctd\u003eMildew Resistant Polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003ctd\u003ePolyester UV-Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeat Hinges\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFasteners\u003c\/th\u003e\n\u003ctd\u003eStainless Steel Staples and Mounting Fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eAdjustable\u003c\/th\u003e\n\u003ctd\u003eNon-Adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFoldable\u003c\/th\u003e\n\u003ctd\u003eNon-Foldable\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeadrest\u003c\/th\u003e\n\u003ctd\u003eWithout Headrest\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What boats does this corner seat fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The 32 by 22 inch footprint fits corner seating on most 22 to 25 foot pontoons and deck boats. On a narrow 20 foot pontoon it can overhang the deck, so measure your corner before ordering.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is there plywood in the frame?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. Taylor Made rotationally molds the frame from marine grade polyethylene, so there's no wood core to soak up water, swell, or rot out over a few wet seasons.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does the seat have storage inside?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The seat base is hinged on aluminum hinges, so the cushion flips up and you can get at the storage void inside the molded base.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Beige. The upholstery is marine grade vinyl over mildew-resistant polyurethane foam.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I adjust, recline, or fold it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This is a fixed corner module. It's non-adjustable and non-foldable, and it ships without a headrest, so the back stays at a set recline. If you need a reclining or pedestal helm seat, that's a different part.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I mount it so it holds up?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The molded base has mounting points. On a thin console or deck floor, back the bolts with a plate or a large fender washer so you don't crack the fiberglass, and seal every fastener with butyl tape or marine sealant so water can't get into the deck.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will the vinyl and stitching survive the sun?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The seat uses marine grade vinyl and polyester UV-resistant thread, which is the part that usually fails first on cheaper seats. Wipe it down and let it breathe under a cover when you can to get the most life out of it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the exact dimensions?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"32 inches long by 22 inches wide by 30 inches tall overall.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with the matching straight sections?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, this is sold as a single square corner unit. It's designed to sit between matching Taylor Made straight lounge sections on the factory mounting pattern to build out an L-shaped layout.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Taylor Made","offers":[{"title":"Default Title","offer_id":44788437090397,"sku":"2007370","price":693.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_02fb5384-fd29-4453-8653-454154174116.jpg?v=1785016413","url":"https:\/\/nvnmarine.com\/products\/taylor-made-platinum-lounge-seat-433042-square-corner","provider":"NVN Marine","version":"1.0","type":"link"}