Taylor Made Hull Gard Fender 8.5" x 27" | 41028
Taylor Made Hull Gard Fender 8.5" x 27" | 41028 — Product description
The Taylor Made Hull Gard is the inflatable vinyl fender you hang over the rail when you're coming into the dock or rafting up. This one measures 8.5 inches across and 27 inches long, sized right for boats in the 35 to 50 foot range. It ships pre-inflated with a valve so you can dial in the firmness.
The Taylor Made Hull Gard is a classic inflatable fender, and this is the 8-1/2 inch by 27 inch size in Mid Atlantic Blue. If you run a boat somewhere in the 35 to 50 foot range, this is the fender that stands between your gelcoat and the dock. Hang a few along the rail before you come alongside and you stop worrying about pilings, cleats, and the boat next to you.
It's built from heavy vinyl with a smooth finish, molded into the cylinder shape that's been protecting hulls for years. The oval profile spreads the load where the boat meets the dock instead of putting all the pressure on one point. And because it's vinyl, a wipe-down with soap and water keeps it looking right season after season.
Here's the part people appreciate. It ships pre-inflated, and the inflation valve lets you adjust the air pressure to suit the situation. Coming into a fixed dock on a windy day? Firm it up. Rafting against another boat with a little give? Let a bit out. You're not stuck with one firmness the way you are with a solid foam fender.
Rig it the way you'd rig any Hull Gard, hung vertically from a cleat or rail through the molded eye, or horizontally along the rub rail when you're tying up against a wall. On a 35 to 50 foot boat we'd carry at least three or four of these, more if you dock in a tight slip or raft up often. One fender is rarely enough on a boat this size.
A quick honest note on sizing. This 8.5 by 27 fender is matched to mid-size boats. If your boat is smaller, a fender this big is more than you need and it'll be awkward to stow. Bigger boat? Step up to a larger Hull Gard. Get the size right and the fender does its job without getting in the way.
Key Features
- 8-1/2 inch diameter by 27 inch length, sized for boats from 35 to 50 feet
- Heavy vinyl construction with a smooth Mid Atlantic Blue finish
- Ships pre-inflated with an inflation valve so you can adjust air pressure and firmness
- Cylinder body with an oval profile that spreads dock and hull contact load
- Molded eye at each end for vertical or horizontal hanging from a cleat, rail, or rub rail
- Wipes clean with soap and water for season after season of use
Why Buy from NVN Marine
- Authorized Taylor Made reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Taylor Made Hull Gard Inflatable Fender 8.5" x 27" Mid Atlantic Blue |
|---|---|
| Brand | Taylor Made |
| Manufacturer Part Number | 41028 |
| UPC | 040011314284 |
| Color | Mid Atlantic Blue |
| Material | Vinyl |
| Finish | Smooth |
| Shape | Cylinder |
| Profile | Oval |
| Diameter | 8-1/2 inches |
| Length | 27 inches |
| Recommended Boat Size | 35 ft to 50 ft |
| Inflation | Pre-inflated with adjustable inflation valve |
| Quantity | Single |
| Application | Marine |
Frequently asked questions
What size boat is this fender for?
Taylor Made sizes this 8-1/2 inch by 27 inch Hull Gard for boats in the 35 to 50 foot range. On a boat that size it gives you enough diameter to keep the hull off the dock without being awkward to handle.
Does it come inflated?
Yes. It ships pre-inflated, so it's ready to hang out of the box. The inflation valve is there if you want to top it off or adjust the pressure.
Can I adjust how firm it is?
You can. The inflation valve lets you add or release air to change the firmness. Firm it up against a fixed dock in wind, or soften it a touch when you're rafting against another boat.
How many should I carry?
On a 35 to 50 foot boat we'd run at least three or four. Add more if you dock in a tight slip or raft up often. One fender is rarely enough on a boat this size.
What's it made of and how do I clean it?
It's heavy vinyl with a smooth finish. Soap, water, and a rag handle most of the dock grime. No special cleaner needed.
How do I hang it?
Run a line through the molded eye and hang it vertically from a cleat or rail, or horizontally along the rub rail when you're tying up against a wall or piling.
