Taylor Made Dock Box Pneumatic Lift Set | 83610
Taylor Made Dock Box Pneumatic Lift Set | 83610 — Product description
When your Taylor Made Stow 'N Go dock box lid stops staying up on its own, worn gas lifts are almost always the reason. This matched pair of 15-inch pneumatic lifts puts the hold back in the hinge so the lid stays where you leave it.
The Taylor Made pneumatic lift set is the part you reach for when your Stow 'N Go dock box lid stops behaving. You know the feeling. You lift the lid to grab a line or a life jacket, let go, and it slowly creeps back down on you. That's a worn gas lift, and this pair puts the spring back in the hinge.
Each set includes two pneumatic lifts measuring 15 inches, the pair your dock box uses to hold the lid open and lower it under control. Pneumatic means gas-charged, so the lift carries the weight and eases the lid down instead of letting it slam shut on your knuckles. Replace both at the same time. If one has given out, the other is usually not far behind, and a mismatched pair makes the lid rack and bind.
This set fits the Taylor Made Stow 'N Go dock box line, with one exception: it does not fit model 83560. If you're not sure which box you have, check the model number on the housing before you order, or reach out and we'll help you sort it out.
Dock boxes take a beating out there. Sun, salt, and the constant open-and-close cycle wear the gas charge down over a few seasons, especially on boxes that live in full exposure at the end of a dock. When the lid won't stay up, it's almost always the lifts and not the box itself. A fresh pair is a cheap fix that makes the whole box feel new again.
Swapping them is straightforward. The old lifts come off the ball studs or brackets on the lid and the box body, and the new ones go on the same way. Basic hand tools, a few minutes, and you're back to a lid that stays where you put it. It's a genuine Taylor Made replacement, so the length and mounting match what came on the box from the factory. No guessing, no shimming, no fighting the fit.
Key Features
- Pneumatic gas-charged design holds the dock box lid open and lowers it under control
- 15-inch lift length, matched to the geometry of Taylor Made Stow 'N Go boxes
- Sold as a set of 2, the full pair your dock box lid uses
- Fits the Taylor Made Stow 'N Go dock box line, except model 83560
- Genuine Taylor Made replacement for a direct, no-modification fit
- Installs with basic hand tools onto the existing ball studs or brackets
Why Buy from NVN Marine
- Authorized Taylor Made reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Taylor Made Stow 'N Go Dock Box Pneumatic Lift Set |
|---|---|
| Brand | Taylor Made |
| Manufacturer Part Number | 83610 |
| UPC | 040011766663 |
| Type | Pneumatic |
| Length | 15 Inches |
| Quantity | Set of 2 |
| Fitment | Taylor Made Stow 'N Go Dock Boxes (except 83560) |
| Application | Dock Box Lid Support |
Frequently asked questions
Which dock boxes does this lift set fit?
It fits the Taylor Made Stow 'N Go dock box line, with one exception: it does not fit model 83560. If you're unsure which box you have, check the model number on the housing or reach out and we'll confirm it for you.
How many lifts come in the set?
Two. This is the matched pair your dock box lid uses, one for each side.
How long are the lifts?
Each pneumatic lift is 15 inches, matched to the factory geometry of the Stow 'N Go boxes it fits.
Should I replace both lifts at once?
Yes. If one has worn out, the other is usually close behind, and running one old lift against one new one makes the lid rack and bind. Change them as a pair.
How do I know the lifts are worn out?
The clearest sign is a lid that won't stay up. You raise it, let go, and it slowly creeps back down. That's the gas charge losing its hold, and it's exactly what these replacements fix.
Is this a genuine Taylor Made part and is it hard to install?
It's a genuine Taylor Made replacement, so the length and mounting match the factory setup. Installation is straightforward with basic hand tools. The old lifts come off the existing ball studs or brackets and the new ones go on the same way.
