{"product_id":"taylor-made-boatguard-cuddy-cabin-cover-21-23-ft","title":"Taylor Made BoatGuard Cuddy Cabin Boat Cover, 21-23 ft","description":"\u003cp class=\"nvn-hero\"\u003eThe Taylor Made BoatGuard Cuddy Cabin Boat Cover shields your V-hull cuddy from sun, rain, and road grime whether it's parked in the yard or headed down the highway. It's cut to fit boats 21 to 23 feet long with beams up to 102 inches, sewn from gray acrylic polyester, and it ships with a storage bag and tie-down straps so you're ready the day it arrives.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eWhen you own a cuddy cabin, the boat spends more time covered than uncovered. The Taylor Made BoatGuard Cuddy Cabin Boat Cover is built for exactly that stretch of downtime, the weeks between trips when your V-hull sits on the trailer in the driveway or waits out the offseason under a carport. It drapes over the cockpit, the walk-through windshield, and the raised cuddy up front, keeping leaves, pollen, bird mess, and UV off the gelcoat and upholstery so the boat looks the same in spring as it did when you put it away.\u003c\/p\u003e\n\u003cp\u003eThis cover is sized for boats in the 21 to 23 foot range with a maximum beam of 102 inches. Before you order, measure your own boat the way the cover is cut, from the tip of the bow to the end of the transom along the centerline, and take the widest beam reading at the rub rail rather than the deck. Rod holders, bow rails, and aftermarket hardware add width, so a boat that reads 22 feet on paper can push the beam past what a cover expects. Getting those two numbers right is the difference between a cover that snaps taut and one that flaps.\u003c\/p\u003e\n\u003cp\u003eThe fabric is a gray acrylic polyester that sheds water and stands up to sun without going brittle after a season in the yard. It's water repellent rather than sealed, which is what you want on a stored boat. Air moves through the weave so condensation doesn't get trapped against the seats and carpet, and rain runs off instead of soaking in. That breathability is the reason a fitted cover beats a plastic tarp every time, since a tarp holds moisture underneath and cooks the interior on a hot day.\u003c\/p\u003e\n\u003cp\u003eBoatGuard is made to travel. Integrated tie-downs let you cinch the cover to the trailer frame so it stays put at highway speed instead of ballooning and chafing. Run the straps under the hull and snug them evenly, and add a few extra passes at the transom corners where wind tends to lift the fabric first. For long tows, a bow support pole set under the cover at the windshield keeps rain and road spray from pooling on the flat sections up front. The cover doesn't ship with a pole, but any standard adjustable support works.\u003c\/p\u003e\n\u003cp\u003eA cover that fits right does more than look neat. When the fabric is drawn tight and tied down, it can't rub a groove into the gelcoat or wear a shiny spot on the rail, and it won't collect a puddle that freezes and stretches the seams. The 21 to 23 foot BoatGuard is cut with enough material to reach down the hull sides and cover the sheer line, so the parts of the boat that catch the most sun and rain stay shaded.\u003c\/p\u003e\n\u003cp\u003eWhen the season ends, the included storage bag keeps the folded cover clean and out of the way in the garage. One habit worth keeping, let the cover dry fully before you fold it into the bag. Stowing it damp is how mildew starts. This is the right cover for a trailered or stored cuddy cabin V-hull in the 21 to 23 foot class. If your boat is a pontoon or a center console, Taylor Made builds BoatGuard covers cut specifically for those layouts, so match the cover to the hull rather than forcing this one to fit.\u003c\/p\u003e\n\u003cp\u003eUpkeep is simple. Hose the cover off when it gets dusty and let it air dry on the boat before folding. Skip the pressure washer and harsh detergents, which break down the water-repellent finish over time. Treated gently, a BoatGuard cover carries a trailered boat through several seasons of driveway storage and weekend trips.\u003c\/p\u003e\n\u003cp\u003eTaylor Made has been making covers, tops, and marine canvas for decades, and the BoatGuard line is their answer to owners who want honest, ready-to-fit protection without a custom-cover price tag. It's a straightforward cover that does the job, keeps your investment out of the weather, and packs away small when the boat is back in the water.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSized for V-hull cuddy cabin boats 21 to 23 feet long with a maximum 102-inch beam for a close, trailerable fit.\u003c\/li\u003e\n  \u003cli\u003eGray acrylic polyester fabric sheds water and resists sun fade through a season of outdoor storage.\u003c\/li\u003e\n  \u003cli\u003eWater-repellent, breathable weave lets condensation escape so upholstery and carpet stay dry underneath.\u003c\/li\u003e\n  \u003cli\u003eIntegrated tie-down straps cinch the cover to the trailer frame for security at highway speed.\u003c\/li\u003e\n  \u003cli\u003eCovers the cockpit, walk-through windshield, and raised cuddy to protect gelcoat and interior from UV, rain, and debris.\u003c\/li\u003e\n  \u003cli\u003eIncludes a storage bag to keep the folded cover clean and compact in the offseason.\u003c\/li\u003e\n  \u003cli\u003eCut with skirting that reaches down the hull sides to shade the sheer line.\u003c\/li\u003e\n  \u003cli\u003eHandles trailering, storage, and mooring of trailered cuddy cabin boats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Taylor Made reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size boat does this cover fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's cut for V-hull cuddy cabin boats 21 to 23 feet long with a beam up to 102 inches. Measure your boat bow to transom along the centerline and take the beam at the widest point of the rub rail before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the cover waterproof?\u003c\/summary\u003e\n    \u003cp\u003eIt's water repellent, not fully sealed. The acrylic polyester sheds rain and road spray while still letting the boat breathe, which keeps moisture from getting trapped against the seats and carpet during storage.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I trailer my boat with this cover on?\u003c\/summary\u003e\n    \u003cp\u003eYes. BoatGuard is built for trailering. Use the integrated tie-downs to strap the cover to the trailer frame, snug the straps evenly, and add extra passes at the transom corners where wind lifts the fabric first.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with a support pole?\u003c\/summary\u003e\n    \u003cp\u003eNo, a support pole isn't included. For long tows or wet weather, a standard adjustable bow support set under the cover at the windshield keeps rain and spray from pooling on the flat sections up front.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is the cover?\u003c\/summary\u003e\n    \u003cp\u003eThe cover is gray.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it include a storage bag?\u003c\/summary\u003e\n    \u003cp\u003eYes, a storage bag ships with the cover so you can keep it folded and clean in the garage during the offseason.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow should I store the cover?\u003c\/summary\u003e\n    \u003cp\u003eLet the cover dry completely before folding it into the storage bag. Putting it away damp is the main cause of mildew. Hose it off when it gets dusty and air dry it on the boat.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill this fit a pontoon or center console?\u003c\/summary\u003e\n    \u003cp\u003eNo. This one is shaped for V-hull cuddy cabin boats. Taylor Made makes separate BoatGuard covers cut for pontoons and other layouts, so match the cover to your hull type.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat material is the cover made from?\u003c\/summary\u003e\n    \u003cp\u003eGray acrylic polyester. It's chosen to shed water and resist sun fade while staying breathable enough to prevent condensation buildup underneath.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eTaylor Made BoatGuard Cuddy Cabin Boat Cover, 21-23 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTaylor Made\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e70207\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e040011702074\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Line\u003c\/th\u003e\n\u003ctd\u003eBoatGuard\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBoat Type\u003c\/th\u003e\n\u003ctd\u003eV-Hull Cuddy Cabin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFits Boat Length\u003c\/th\u003e\n\u003ctd\u003e21 ft to 23 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum Beam Width\u003c\/th\u003e\n\u003ctd\u003e102 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFabric\u003c\/th\u003e\n\u003ctd\u003eAcrylic Polyester\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWater Resistance\u003c\/th\u003e\n\u003ctd\u003eWater Repellent\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRecommended Use\u003c\/th\u003e\n\u003ctd\u003eTrailering\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eStorage Bag\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTie-Down Straps\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eMarine Boats\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size boat does this cover fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's cut for V-hull cuddy cabin boats 21 to 23 feet long with a beam up to 102 inches. Measure your boat bow to transom along the centerline and take the beam at the widest point of the rub rail before ordering.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the cover waterproof?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's water repellent, not fully sealed. The acrylic polyester sheds rain and road spray while still letting the boat breathe, which keeps moisture from getting trapped against the seats and carpet during storage.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I trailer my boat with this cover on?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. BoatGuard is built for trailering. Use the integrated tie-downs to strap the cover to the trailer frame, snug the straps evenly, and add extra passes at the transom corners where wind lifts the fabric first.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a support pole?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, a support pole isn't included. For long tows or wet weather, a standard adjustable bow support set under the cover at the windshield keeps rain and spray from pooling on the flat sections up front.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is the cover?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The cover is gray.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it include a storage bag?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, a storage bag ships with the cover so you can keep it folded and clean in the garage during the offseason.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How should I store the cover?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Let the cover dry completely before folding it into the storage bag. Putting it away damp is the main cause of mildew. Hose it off when it gets dusty and air dry it on the boat.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will this fit a pontoon or center console?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This one is shaped for V-hull cuddy cabin boats. Taylor Made makes separate BoatGuard covers cut for pontoons and other layouts, so match the cover to your hull type.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What material is the cover made from?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Gray acrylic polyester. It's chosen to shed water and resist sun fade while staying breathable enough to prevent condensation buildup underneath.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Taylor Made","offers":[{"title":"Default Title","offer_id":45051848589405,"sku":"2008157","price":181.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_f06074f4-d074-4326-bbd9-8bb6b8bbd5ea.jpg?v=1789404620","url":"https:\/\/nvnmarine.com\/products\/taylor-made-boatguard-cuddy-cabin-cover-21-23-ft","provider":"NVN Marine","version":"1.0","type":"link"}