{"product_id":"taylor-made-34in-pontoon-helm-stand-console-433065","title":"Taylor Made 34\" Pontoon Helm Stand \u0026 Side Console, Beige","description":"\u003cp class=\"nvn-hero\"\u003eTaylor Made's 34-inch helm stand gives your pontoon or side-console boat a finished, factory-look steering station without a full rebuild. The base is rotationally-molded marine polyethylene, so it won't warp or rot, and the seat wears marine-grade beige vinyl over mildew-resistant foam. It bolts straight to the deck. A solid spot to mount your wheel, throttle, and gauges.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you're building out a pontoon or repowering an older side-console boat, the helm stand is what pulls the whole dash together. Taylor Made's 34-inch console gives you a self-contained steering station that looks like it came from the factory. It's floor-mounted, so it bolts flat to the deck, and the whole body is one rotationally-molded piece of marine-grade polyethylene. That matters. A thick-wall rotomolded base doesn't warp in the sun, doesn't soak up water, and doesn't rot out from the bottom the way a plywood box eventually will.\u003c\/p\u003e\n\u003cp\u003eThe dimensions are 34 inches long, 26 inches wide, and 34 inches tall. That 26-inch footprint drops cleanly onto most standard pontoon and aluminum-boat deck widths, and the 34-inch height puts the wheel and throttle at a comfortable stand-up or lean-against driving position on a typical pontoon. On a low-freeboard hull you'll want to check your sightline first. Some folks running shorter boats add a spacer or step up to a taller seat to get their eye level right. Measure before you drill.\u003c\/p\u003e\n\u003cp\u003eUp top you get an integrated seat finished in beige marine-grade vinyl. The foam underneath is mildew-resistant polyurethane, which is the part that actually keeps a helm seat usable season after season. Wet gear, spray, morning dew, none of it turns the cushion into a sponge. The vinyl is stitched with polyester UV-resistant thread so the seams hold up to sun and salt instead of chalking and splitting after a summer. Seat hinges are aluminum, and everything's stapled and fastened with stainless steel, so the hardware isn't going to bleed rust streaks down the side of your console.\u003c\/p\u003e\n\u003cp\u003eInstall is straightforward if you plan it. This is a floor-mount unit, meaning you're bolting through the deck. Back it with a piece of marine plywood or a solid backing plate under the deck skin and spread the load. Snug the bolts, don't gorilla them. Rotomolded plastic is tough, but you can crack a base by over-torquing four bolts into a thin floor. If you're rigging on an aluminum deck or a soft spot, a backing plate is cheap insurance and it kills a lot of the vibration and hull slap you'd otherwise feel through the console at speed. Dry-fit the console where you want it, mark your bolt holes, and take a minute to make sure the wheel and throttle land where your hands naturally fall before you commit to a single hole. A little planning up front saves you from a crooked dash you'll stare at every trip.\u003c\/p\u003e\n\u003cp\u003eThere's room inside and across the face to run your steering helm, throttle control, and a gauge cluster or a small display. It's a genuine steering console, not just a seat box, so you're mounting a real dash here. Wire runs drop down through the base and out under the deck, which keeps your cables out of the weather and out of the way.\u003c\/p\u003e\n\u003cp\u003eWho's this for? Pontoon owners upgrading a tired original console, anglers converting a bare deck into a proper side-console layout, and anyone rebuilding a project boat who wants a one-and-done steering station instead of piecing one together. It's a beige finish, so if your boat lives on a lift in strong sun, keep a cover on it. Any light-colored marine vinyl lasts a lot longer when it's shaded between trips. Rinse the aluminum hinges with fresh water if you run salt, same as you'd do with any deck hardware.\u003c\/p\u003e\n\u003cp\u003eTaylor Made has been building marine seating, tops, and helm gear for decades, and this console is built to that standard. Marine polyethylene base, marine vinyl, stainless fasteners, UV thread. It's the boring, correct spec list you want in something that's going to sit out in the weather and get leaned on every trip.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eRotationally-molded marine-grade polyethylene base won't warp, rot, or soak up water like a plywood console box\u003c\/li\u003e\n  \u003cli\u003e34in L x 26in W x 34in H footprint fits standard pontoon and aluminum-boat deck widths at a comfortable stand-up helm height\u003c\/li\u003e\n  \u003cli\u003eIntegrated seat wrapped in beige marine-grade vinyl over mildew-resistant polyurethane foam that shrugs off spray and dew\u003c\/li\u003e\n  \u003cli\u003ePolyester UV-resistant thread holds the seams together through sun and salt without chalking or splitting\u003c\/li\u003e\n  \u003cli\u003eAluminum seat hinges plus stainless steel staples and mounting fasteners keep rust streaks off your console\u003c\/li\u003e\n  \u003cli\u003eFloor-mount design bolts flat to the deck for a clean, factory-look steering station\u003c\/li\u003e\n  \u003cli\u003eOpen face and interior accept your steering helm, throttle control, and a gauge cluster or small display\u003c\/li\u003e\n  \u003cli\u003eWire runs drop through the base and out under the deck, keeping cables out of the weather\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Taylor Made reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size is this Taylor Made helm stand?\u003c\/summary\u003e\n    \u003cp\u003eIt measures 34 inches long, 26 inches wide, and 34 inches tall. That 26-inch base fits most standard pontoon and aluminum-boat deck widths, and the 34-inch height sets a comfortable stand-up or lean-against driving position.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it mount to the boat?\u003c\/summary\u003e\n    \u003cp\u003eIt's a floor-mount console. You bolt it flat to the deck through the base. Back it with marine plywood or a solid backing plate underneath to spread the load and cut vibration.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the frame made of?\u003c\/summary\u003e\n    \u003cp\u003eA single rotationally-molded piece of marine-grade polyethylene with a thick wall, so it won't warp in the sun or rot out the way a wood console box eventually does.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill the seat hold up outdoors?\u003c\/summary\u003e\n    \u003cp\u003eThe seat is beige marine-grade vinyl over mildew-resistant polyurethane foam, stitched with UV-resistant polyester thread. It's built to live outside. On a boat that sits in strong sun, a cover keeps the light vinyl looking good longer.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I mount a steering wheel and gauges to it?\u003c\/summary\u003e\n    \u003cp\u003eYes. It's a full steering console, so there's room for your helm, throttle control, and a gauge cluster or small display. Cables route down through the base and out under the deck.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is it?\u003c\/summary\u003e\n    \u003cp\u003eBeige.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the hardware corrosion-resistant?\u003c\/summary\u003e\n    \u003cp\u003eSeat hinges are aluminum and the staples and mounting fasteners are stainless steel. If you run in saltwater, give the aluminum hinges a fresh-water rinse now and then like any deck hardware.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this the right height for a low boat?\u003c\/summary\u003e\n    \u003cp\u003eOn a typical pontoon it's spot-on. On a low-freeboard hull, check your sightline over the bow before you drill. Some owners add a spacer or a taller seat to dial in eye level. Measure first.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it work for a side-console conversion?\u003c\/summary\u003e\n    \u003cp\u003eThat's a common use. It gives you a one-piece steering station for turning a bare deck into a proper side-console layout instead of building a box from scratch.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eTaylor Made 34\" Pontoon Helm Stand \u0026amp; Side Console, Beige\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTaylor Made\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e433065\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e848150042347\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConsole Type\u003c\/th\u003e\n\u003ctd\u003eSide Console\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eFloor Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall Length\u003c\/th\u003e\n\u003ctd\u003e34 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall Width\u003c\/th\u003e\n\u003ctd\u003e26 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e34 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBeige\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFrame Material\u003c\/th\u003e\n\u003ctd\u003eRotationally-Molded Marine Grade Polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUpholstery\u003c\/th\u003e\n\u003ctd\u003eMarine Grade Vinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFoam\u003c\/th\u003e\n\u003ctd\u003eMildew Resistant Polyurethane Foam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeat Hinges\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFasteners\u003c\/th\u003e\n\u003ctd\u003eStainless Steel Staples and Mounting Fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003ctd\u003ePolyester UV-Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size is this Taylor Made helm stand?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It measures 34 inches long, 26 inches wide, and 34 inches tall. That 26-inch base fits most standard pontoon and aluminum-boat deck widths, and the 34-inch height sets a comfortable stand-up or lean-against driving position.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it mount to the boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a floor-mount console. You bolt it flat to the deck through the base. Back it with marine plywood or a solid backing plate underneath to spread the load and cut vibration.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the frame made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A single rotationally-molded piece of marine-grade polyethylene with a thick wall, so it won't warp in the sun or rot out the way a wood console box eventually does.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will the seat hold up outdoors?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The seat is beige marine-grade vinyl over mildew-resistant polyurethane foam, stitched with UV-resistant polyester thread. It's built to live outside. On a boat that sits in strong sun, a cover keeps the light vinyl looking good longer.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I mount a steering wheel and gauges to it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It's a full steering console, so there's room for your helm, throttle control, and a gauge cluster or small display. Cables route down through the base and out under the deck.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Beige.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the hardware corrosion-resistant?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Seat hinges are aluminum and the staples and mounting fasteners are stainless steel. If you run in saltwater, give the aluminum hinges a fresh-water rinse now and then like any deck hardware.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this the right height for a low boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"On a typical pontoon it's spot-on. On a low-freeboard hull, check your sightline over the bow before you drill. Some owners add a spacer or a taller seat to dial in eye level. Measure first.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it work for a side-console conversion?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"That's a common use. It gives you a one-piece steering station for turning a bare deck into a proper side-console layout instead of building a box from scratch.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Taylor Made","offers":[{"title":"Default Title","offer_id":44998456082525,"sku":"2007658","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_e29c8ce1-2b77-4dca-86bf-70a1bc881cb7.jpg?v=1788676155","url":"https:\/\/nvnmarine.com\/products\/taylor-made-34in-pontoon-helm-stand-console-433065","provider":"NVN Marine","version":"1.0","type":"link"}