{"product_id":"taylor-made-34-pontoon-helm-stand-console-433108","title":"Taylor Made 34\" Pontoon Boat Helm Stand Side Console, Champagne","description":"\u003cp class=\"nvn-hero\"\u003eThe Taylor Made 34-inch side console is a floor-mount helm stand built for pontoons and side-console boats. One-piece rotationally-molded polyethylene frame, champagne marine vinyl over mildew-resistant foam, and all marine-grade hardware. It's a solid, standing-height steering station that won't rot or rust out on you.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you're rigging or refreshing a pontoon or a side-console skiff, the helm stand is the piece that ties the whole cockpit together. Taylor Made builds this 34-inch console to take that job seriously. The frame is rotationally-molded marine grade polyethylene, so it's one solid piece with no seams to split and no wood core to rot. That matters. A steering station lives right in the spray and the sun, and the part that fails first on a cheap console is usually the particleboard hiding under the vinyl. There's none of that here.\u003c\/p\u003e\n\u003cp\u003eThe console measures 34 inches tall, 34 inches long, and 26 inches wide, which puts the wheel and your gauges at a comfortable standing or leaning height on most pontoons and bay boats in the 20 to 24 foot range. It floor-mounts flat to the deck. The champagne marine-grade vinyl is wrapped over mildew-resistant polyurethane foam and stitched with polyester UV-resistant thread, so the seams hold up to seasons of sun instead of chalking and letting go. Aluminum seat hinges and stainless steel staples and fasteners round it out. Nothing on this console is going to rust a brown streak down your gelcoat.\u003c\/p\u003e\n\u003cp\u003eThere's usable storage molded right into the base, which is a bigger deal than it sounds on a boat where every dry cubic foot counts. Life jackets, a tackle bag, dock lines, the stuff that otherwise slides around the deck. The rotomolded walls wipe clean when something spills, and there's no carpet or fabric liner in there to hold water and start smelling. The face of the console gives you a flat, drillable area for your steering helm, a gauge or two, switches, and a 12-volt outlet, so you can lay out a clean dash instead of fighting for space. Plan your cutouts before you drill and you'll end up with a helm that looks factory-built.\u003c\/p\u003e\n\u003cp\u003eA couple of things we tell every customer before they bolt one down. First, if your deck is thin fiberglass, back the mounting bolts with a quarter-inch backing plate or a set of fender washers. The rotomolded base is strong, but you're spreading the load of a person leaning on the wheel, and you don't want the fasteners working loose in a chop. Second, if your floor isn't dead flat, shim the base with a thin strip of marine board before you torque it down so it doesn't flex. Run a bead of marine sealant under the base too. It keeps the floor gasket dry and stops the slow weep that can show up after a season or two in salt water.\u003c\/p\u003e\n\u003cp\u003eHeight-wise, 34 inches is a true standing console. On a low-freeboard 16-foot jon boat it can feel tall and crowd a narrow cockpit, so measure your layout first. On a pontoon, a bay boat, or a 20-plus-foot side-console skiff it sits right where you want it. If you like to run seated, a lot of folks pair it with a 6-inch pedestal spacer to dial in the exact height. The champagne color is a light, warm neutral that works with almost any interior. Just know that lighter vinyls show dust and mildew sooner than dark colors, so a wipe-down with a marine vinyl cleaner every few trips keeps it looking sharp.\u003c\/p\u003e\n\u003cp\u003eTaylor Made has been building pontoon and marine furniture for a long time, and it shows in the details here. The molded storage in the base, the UV thread, the marine-grade hardware. It's a straightforward, well-built steering station that'll outlast a bargain console by years. If you're not sure it fits your rigging or your steering setup, give us a call. We'll walk through your helm layout with you before you order.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eRotationally-molded marine grade polyethylene frame, one solid piece with no wood core to rot or seams to split\u003c\/li\u003e\n  \u003cli\u003e34 in H x 34 in L x 26 in W, true standing-height console for pontoons and 20 to 24 ft side-console boats\u003c\/li\u003e\n  \u003cli\u003eChampagne marine-grade vinyl over mildew-resistant polyurethane foam, holds up to sun and spray\u003c\/li\u003e\n  \u003cli\u003ePolyester UV-resistant thread, seams stay stitched instead of chalking and letting go\u003c\/li\u003e\n  \u003cli\u003eAluminum seat hinges plus stainless steel staples and fasteners, no rust streaks on your gelcoat\u003c\/li\u003e\n  \u003cli\u003eFloor-mount design bolts flat to the deck for a solid, permanent steering station\u003c\/li\u003e\n  \u003cli\u003eStorage molded into the base keeps life jackets, lines, and gear off the deck\u003c\/li\u003e\n  \u003cli\u003eFlat console face gives you clean space to mount a helm, gauges, switches, and a 12V outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Taylor Made reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the exact dimensions of this console?\u003c\/summary\u003e\n    \u003cp\u003eIt measures 34 inches long, 26 inches wide, and 34 inches tall. That 34-inch height makes it a true standing-height helm stand.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color is it?\u003c\/summary\u003e\n    \u003cp\u003eChampagne, a light warm neutral that works with most boat interiors. Some distributor listings call it grey, but the vinyl is the champagne shade.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it mount to my boat?\u003c\/summary\u003e\n    \u003cp\u003eIt floor-mounts flat to the deck. If your deck is thin fiberglass, back the mounting bolts with a quarter-inch backing plate or fender washers so the fasteners don't work loose under load.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat boats does this fit?\u003c\/summary\u003e\n    \u003cp\u003eIt's sized for pontoons, bay boats, and side-console skiffs in the 20 to 24 foot range. On a low-freeboard 16-foot jon boat the 34-inch height can feel tall and crowd a narrow cockpit, so measure your layout first.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the frame made of?\u003c\/summary\u003e\n    \u003cp\u003eRotationally-molded marine grade polyethylene. It's one solid piece with no wood core, so there's nothing inside to rot or delaminate over time.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs there storage in the base?\u003c\/summary\u003e\n    \u003cp\u003eYes. Storage is molded right into the base for life jackets, dock lines, and gear, and the rotomolded walls wipe clean.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I mount my steering helm and gauges to it?\u003c\/summary\u003e\n    \u003cp\u003eYes. The console face is a flat, drillable area with room for a steering helm, a gauge or two, switches, and a 12-volt outlet.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill the hardware hold up in salt water?\u003c\/summary\u003e\n    \u003cp\u003eThe hinges are aluminum and the staples and fasteners are stainless steel. To keep the floor gasket dry over the seasons, run a bead of marine sealant under the base when you install it.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I adjust the height?\u003c\/summary\u003e\n    \u003cp\u003eThe console itself is a fixed 34 inches. If you want to run seated or fine-tune the height, a lot of owners add a 6-inch pedestal spacer under the base.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eTaylor Made 34\" Pontoon Boat Helm Stand Side Console, Champagne\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTaylor Made\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e433108\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e848150042514\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOverall Dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e34 in x 26 in x 34 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eChampagne\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eFloor Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eSide Console \/ Helm Stand\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFrame Material\u003c\/th\u003e\n\u003ctd\u003eRotationally-Molded Marine Grade Polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCover Material\u003c\/th\u003e\n\u003ctd\u003eMarine Grade Vinyl\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCushion Foam\u003c\/th\u003e\n\u003ctd\u003eMildew Resistant Polyurethane Foam\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeat Hinges\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFasteners\u003c\/th\u003e\n\u003ctd\u003eStainless Steel Staples and Mounting Fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003ctd\u003ePolyester UV-Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the exact dimensions of this console?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It measures 34 inches long, 26 inches wide, and 34 inches tall. That 34-inch height makes it a true standing-height helm stand.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Champagne, a light warm neutral that works with most boat interiors. Some distributor listings call it grey, but the vinyl is the champagne shade.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it mount to my boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It floor-mounts flat to the deck. If your deck is thin fiberglass, back the mounting bolts with a quarter-inch backing plate or fender washers so the fasteners don't work loose under load.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What boats does this fit?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's sized for pontoons, bay boats, and side-console skiffs in the 20 to 24 foot range. On a low-freeboard 16-foot jon boat the 34-inch height can feel tall and crowd a narrow cockpit, so measure your layout first.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the frame made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Rotationally-molded marine grade polyethylene. It's one solid piece with no wood core, so there's nothing inside to rot or delaminate over time.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is there storage in the base?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Storage is molded right into the base for life jackets, dock lines, and gear, and the rotomolded walls wipe clean.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I mount my steering helm and gauges to it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The console face is a flat, drillable area with room for a steering helm, a gauge or two, switches, and a 12-volt outlet.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will the hardware hold up in salt water?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The hinges are aluminum and the staples and fasteners are stainless steel. To keep the floor gasket dry over the seasons, run a bead of marine sealant under the base when you install it.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I adjust the height?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The console itself is a fixed 34 inches. If you want to run seated or fine-tune the height, a lot of owners add a 6-inch pedestal spacer under the base.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Taylor Made","offers":[{"title":"Default Title","offer_id":44998454575197,"sku":"2007657","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_de84e4c1-5b5c-4c96-9dba-0aa57c5f9d23.jpg?v=1788676105","url":"https:\/\/nvnmarine.com\/products\/taylor-made-34-pontoon-helm-stand-console-433108","provider":"NVN Marine","version":"1.0","type":"link"}