TACO Marine Lumber Sheet 24x27x1/4 in Arctic White
TACO Marine Lumber Sheet 24x27x1/4 in Arctic White — Product description
This is TACO's marine lumber, a 24 by 27 inch sheet of Arctic White polyethylene at 1/4 inch thick. It's the material you reach for when wood would just rot. Cut it, drill it, and rig it into backing plates, small trim, and repair pieces that live in the weather.
Every boat ends up needing a small piece of stock that can take spray and sun without falling apart. That's what this is. It's a 24 by 27 inch sheet of Arctic White polyethylene, 1/4 inch thick, and it works just like a board of wood right up until the part where wood rots. This stuff doesn't.
Polyethylene won't swell, warp, or delaminate when it gets wet, so it's a natural fit for backing plates behind cleats and hardware, small trim pieces, tackle-station bits, hatch shims, and any little repair that sits out in the weather. The color runs all the way through, so a scratch or a fresh cut edge stays white instead of showing bare wood or primer.
You work it with the tools you already own. Cut it on a table saw or with a jigsaw, drill it, round the edges with a router or a file. At 1/4 inch it's easy to handle and light, but still stiff enough to back up deck hardware. And because it's a raw sheet, you're not paying for a shape you don't need. You cut exactly the parts your project calls for.
Key Features
- 1/4 inch thickness, light enough to cut and drill with standard woodworking tools yet stiff enough for backing plates, small trim, and hardware mounts.
- 24 by 27 inch sheet gives you room to lay out and cut several small parts from a single board.
- Polyethylene construction won't rot, warp, delaminate, or soak up water the way marine plywood does.
- Arctic White color runs through the full thickness, so cut edges and scratches stay white with no paint or sealing needed.
Why Buy from NVN Marine
- Authorized TACO METALS reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | TACO Marine Lumber Polymer Sheet, 24 in x 27 in x 1/4 in, Arctic White |
|---|---|
| Brand | TACO METALS |
| Manufacturer Part Number | P10-2524WHA27-1 |
| UPC | 630838025328 |
| Length | 24 in |
| Width | 27 in |
| Thickness | 1/4 in |
| Color | Arctic White |
| Material | Polyethylene |
Frequently asked questions
Will this rot or soak up water like wood?
No. It's polyethylene, so it won't rot, swell, or delaminate when it gets wet. That's the whole reason to use it in place of a wood board out in the weather.
Can I cut and drill it with normal tools?
Yep. Work it just like wood. A table saw or jigsaw for cutting, a regular bit for drilling, and a router or file to clean up edges.
What's the exact size of the sheet?
It's 24 inches long, 27 inches wide, and 1/4 inch thick, in Arctic White.
Does it need to be painted or sealed?
No. The Arctic White color goes all the way through the sheet, so cut edges and scratches stay white. There's nothing to seal.
