{"product_id":"taco-marine-lumber-48x54x1-2-white-poly-sheet","title":"TACO Marine Lumber 48 x 54 x 1\/2 Inch White Polyethylene Sheet","description":"\u003cp class=\"nvn-hero\"\u003eTACO Metals white polyethylene marine lumber in a 48 by 54 inch sheet, a half inch thick. It's the go-to board for bait tables, livewell lids, backing plates, and any helm or console surface that has to shrug off salt water and sun without rotting, warping, or needing paint. Cut it, drill it, screw it down, and forget about it.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eIf you've spent any time fabricating on a boat, you already know why marine lumber exists. Wood rots. Plywood delaminates. And nobody wants to re-varnish a bait board every spring. This TACO Metals sheet is solid white polyethylene, 48 inches long by 54 inches wide, at a half inch thick. It doesn't absorb water, it doesn't rot, and it never needs paint or sealer. You just cut it to shape and put it to work.\u003c\/p\u003e\n\u003cp\u003eThat half-inch thickness is the sweet spot for a lot of projects. It's stiff enough to stand on its own as a bait table, a livewell lid, or a rigging station top, but still easy to cut and drill with tools you already have in the shop. We see this size go out the door for custom bait boards on 25 to 30 foot center consoles all the time. It's also a favorite for seat bases, hatch covers, electronics backing plates, and trimming out a helm or galley surface where you want something clean and maintenance free.\u003c\/p\u003e\n\u003cp\u003eThe white color is the practical choice for anything food-related. It cleans up with soap and water, holds up to a bleach rinse when you're wiping down after a bloody day, and stays cooler in the sun than a dark board would. It'll show knife marks over time the way any cutting surface does, but that's just character on a working boat.\u003c\/p\u003e\n\u003cp\u003eA few things worth knowing before you start cutting. This is thick poly, so it cuts cleanest with a sharp carbide blade run at a lower speed. Go too fast and the friction heat can gum up and melt the edge. For holes, a drill press gives you the cleanest result. A handheld drill works, but ease into it so you don't chip the edge at this thickness. And here's the one that trips people up: polyethylene expands and contracts with temperature more than wood does. So when you're mounting it down, pre-drill your fastener holes about an eighth inch oversize and use stainless screws with fender washers. That gives the sheet room to move without cracking or buckling.\u003c\/p\u003e\n\u003cp\u003eOn mounting: if you're running a large unsupported span in direct sun, like an open console top, give it a backing. A thin aluminum plate behind the board keeps it flat, because a big sheet of poly baking on an open helm can take a slight bow if it's floating on its own. Backed or well-fastened, it stays put.\u003c\/p\u003e\n\u003cp\u003eOne honest heads-up. A full 48 by 54 sheet at a half inch is a heavy piece of plastic. It's a two-person lift to position on a flybridge or a rigging station without flexing it, so plan on a hand when it shows up. Once it's cut down to your finished part, it's a lot more manageable.\u003c\/p\u003e\n\u003cp\u003eThis is the same material the pros use for a reason. It shrugs off UV, salt spray, fish blood, and cleaning chemicals, and it keeps doing it season after season with zero maintenance. Buy the full sheet, cut what you need for the current project, and you'll have offcuts left over for the next one. That's how most of our customers end up using it, one sheet quietly feeds three or four little jobs around the boat.\u003c\/p\u003e\n\u003cp\u003eNot sure if a half inch is right for your build? For flat surfaces that get stood on or take real load, like a bait table or a livewell lid, the half inch is the right call. For lighter trim, dividers, or panels that just need to look clean, a thinner board saves weight and money. If you tell us what you're building, we'll point you to the right thickness and size.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eSolid white polyethylene sheet, 48 in long by 54 in wide by 1\/2 in thick, for marine fabrication\u003c\/li\u003e\n  \u003cli\u003eWon't rot, delaminate, or absorb water the way wood and plywood do\u003c\/li\u003e\n  \u003cli\u003eNever needs paint, varnish, or sealer, zero maintenance season after season\u003c\/li\u003e\n  \u003cli\u003eFood-safe white surface cleans with soap and water and stands up to a bleach rinse\u003c\/li\u003e\n  \u003cli\u003eHalf-inch thickness is stiff enough for bait tables, livewell lids, and seat bases\u003c\/li\u003e\n  \u003cli\u003eCuts and drills with standard shop tools using a sharp carbide blade\u003c\/li\u003e\n  \u003cli\u003eShrugs off UV, salt spray, and cleaning chemicals for long service life\u003c\/li\u003e\n  \u003cli\u003eOne sheet yields enough material for several projects around the boat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized TACO METALS reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat are the exact dimensions of this sheet?\u003c\/summary\u003e\n    \u003cp\u003eIt's 48 inches long by 54 inches wide, at a half inch thick. That's a full working sheet you cut down to your finished part.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is marine lumber actually made of?\u003c\/summary\u003e\n    \u003cp\u003eIt's solid white polyethylene, a marine-grade plastic. There's no wood core, so it can't rot, delaminate, or soak up water.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat do people use this size for?\u003c\/summary\u003e\n    \u003cp\u003eBait boards, livewell and cooler lids, rigging station tops, seat bases, hatch covers, and electronics backing plates. The 48 by 54 half-inch sheet is a popular starting size for custom work on 25 to 30 foot center consoles.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I cut it with regular shop tools?\u003c\/summary\u003e\n    \u003cp\u003eYes. Use a sharp carbide blade and run it at a lower speed so friction heat doesn't melt the edge. A jigsaw or table saw both work fine with the right blade.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I drill clean holes in it?\u003c\/summary\u003e\n    \u003cp\u003eA drill press gives the cleanest holes. A handheld drill works too, just ease into the cut so you don't chip the edge at this thickness.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow should I fasten it down?\u003c\/summary\u003e\n    \u003cp\u003eUse stainless screws with fender washers, and pre-drill your holes about an eighth inch oversize. Polyethylene expands and contracts with temperature, and the oversize holes give it room to move without cracking.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it warp in the sun?\u003c\/summary\u003e\n    \u003cp\u003eA large unsupported span sitting in direct sun can take a slight bow. If you're mounting a big piece on an open console, back it with a thin aluminum plate to keep it flat. Well-fastened or backed, it stays put.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the white surface food safe?\u003c\/summary\u003e\n    \u003cp\u003eYes, the white polyethylene is a food-safe surface, which is why it's the standard for bait boards and cutting surfaces. It cleans with soap and water and handles a bleach rinse.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it need paint or sealing?\u003c\/summary\u003e\n    \u003cp\u003eNo. The color goes all the way through and the material is unaffected by water and sun, so there's nothing to paint, varnish, or seal, ever.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs a full sheet heavy?\u003c\/summary\u003e\n    \u003cp\u003eYes, a full 48 by 54 sheet at a half inch is a heavy piece of plastic. Plan on a second set of hands to position it before you cut it down.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003e48 Inch Length x 54 Inch Width, 1\/2 Inch Thickness, White, Polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTACO METALS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eP10-5048WHA54\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e630838018009\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Line\u003c\/th\u003e\n\u003ctd\u003eMarine Lumber\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePolyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e48 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e54 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eThickness\u003c\/th\u003e\n\u003ctd\u003e1\/2 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSheet Dimensions (L x W x Thickness)\u003c\/th\u003e\n\u003ctd\u003e48 in x 54 in x 1\/2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eForm Factor\u003c\/th\u003e\n\u003ctd\u003eFlat sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What are the exact dimensions of this sheet?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's 48 inches long by 54 inches wide, at a half inch thick. That's a full working sheet you cut down to your finished part.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is marine lumber actually made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's solid white polyethylene, a marine-grade plastic. There's no wood core, so it can't rot, delaminate, or soak up water.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What do people use this size for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Bait boards, livewell and cooler lids, rigging station tops, seat bases, hatch covers, and electronics backing plates. The 48 by 54 half-inch sheet is a popular starting size for custom work on 25 to 30 foot center consoles.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I cut it with regular shop tools?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Use a sharp carbide blade and run it at a lower speed so friction heat doesn't melt the edge. A jigsaw or table saw both work fine with the right blade.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I drill clean holes in it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A drill press gives the cleanest holes. A handheld drill works too, just ease into the cut so you don't chip the edge at this thickness.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How should I fasten it down?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Use stainless screws with fender washers, and pre-drill your holes about an eighth inch oversize. Polyethylene expands and contracts with temperature, and the oversize holes give it room to move without cracking.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it warp in the sun?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A large unsupported span sitting in direct sun can take a slight bow. If you're mounting a big piece on an open console, back it with a thin aluminum plate to keep it flat. Well-fastened or backed, it stays put.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the white surface food safe?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, the white polyethylene is a food-safe surface, which is why it's the standard for bait boards and cutting surfaces. It cleans with soap and water and handles a bleach rinse.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it need paint or sealing?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. The color goes all the way through and the material is unaffected by water and sun, so there's nothing to paint, varnish, or seal, ever.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is a full sheet heavy?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, a full 48 by 54 sheet at a half inch is a heavy piece of plastic. Plan on a second set of hands to position it before you cut it down.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"TACO METALS","offers":[{"title":"Default Title","offer_id":44998554255453,"sku":"2007742","price":412.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_750fee7f-7a86-48d0-85ed-22ee2e09a4ea.jpg?v=1788680129","url":"https:\/\/nvnmarine.com\/products\/taco-marine-lumber-48x54x1-2-white-poly-sheet","provider":"NVN Marine","version":"1.0","type":"link"}