{"product_id":"taco-marine-carbon-fiber-flag-pole-with-j-lock","title":"TACO Marine 26.4 Inch Carbon Fiber Flag Pole with J-Lock","description":"\u003cp class=\"nvn-hero\"\u003eThe TACO Marine Carbon Fiber Flag Pole gives you a light, corrosion-proof way to fly a flag off the boat. It drops straight into a standard 1-5\/8 inch rod holder or gunwale mount, and the J-Lock keeps it seated tight with no rattle underway. Fixed 26.4 inch height, no drilling, no fuss.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe TACO Marine Carbon Fiber Flag Pole with J-Lock is a clean, no-drill way to fly a flag off your boat. It drops straight into a standard 1-5\/8 inch rod holder or gunwale mount, so if you've already got holders on the transom or the covering boards, you're most of the way there. Fixed height, 26.4 inches, carbon fiber build. This is the pole on its own, sold without a flag and without a storage bag, so you can pair it with whatever flag the day calls for.\u003c\/p\u003e\n\u003cp\u003eCarbon fiber is the whole point here. It's light, it doesn't corrode, and it shrugs off salt spray and UV in a way aluminum and stainless never quite manage over the long haul. Pick it up and you'll notice how little it weighs, which matters a lot when it's cantilevered out of a rod holder and catching wind. Less mass up top means less strain working against the base, and less stress on your mount when you're running through a chop.\u003c\/p\u003e\n\u003cp\u003eThe J-Lock is what keeps it honest. Slide the pole into the holder, give it a turn, and it locks in place instead of bouncing around and rattling every time you hit a wake. Anyone who's run with a loose flag pole knows that maddening tick-tick-tick coming off the stern. The J-Lock solves it. When you're done, it comes out just as fast, so stowing the pole between trips is a ten-second job.\u003c\/p\u003e\n\u003cp\u003eTACO builds these poles to sit tight. The system uses precision tapered wedges that take up the slack between the pole and the holder, so it seats rattle-free even in a holder that's picked up a little play over the years. That snug, wedged fit is a big part of why it stays quiet at speed and doesn't wallow around when the flag is pulling in a stiff breeze.\u003c\/p\u003e\n\u003cp\u003eSo who's this for? Offshore and tournament anglers flying release flags. Cruisers who want to run a courtesy flag when they clear into a foreign port. Divers who need a dive flag up off the gunwale where it's visible. Anyone who just wants a US flag flying proud on the way back to the dock. Because it uses a standard rod holder footprint, you can move it around the boat, run it on the transom one day and amidships the next, with no permanent hardware and no second-guessing.\u003c\/p\u003e\n\u003cp\u003eInstall is about as simple as marine rigging gets. If you've got a 1-5\/8 inch rod holder, drop it in and lock it. That's the whole job. Mounting it in a dedicated gunwale mount works the same way. On lighter hulls, or if your holder is thru-bolted to a thin section of fiberglass, it's worth adding a backing plate underneath to spread the load, especially if you're flying a bigger flag that catches a lot of air. A couple of rubber washers at the base also help isolate vibration from the running gear so it doesn't buzz into the deck.\u003c\/p\u003e\n\u003cp\u003eA few honest notes. This is a fixed 26.4 inch pole, not a telescoping one, so measure your setup and make sure that height clears any hardtop, arch, or T-top edge you'll be swinging near. The flag is sold separately, which is normal for poles at this level, and there's no storage bag in the box, so if you stow it in a rod locker with other gear, give it its own slot or wrap it to keep the carbon finish looking sharp. Treated well, a carbon pole like this outlasts just about everything else on the boat.\u003c\/p\u003e\n\u003cp\u003eIt's a simple piece of gear that does one job and does it right. Light, corrosion-proof, rattle-free, and quick to move wherever you need it. If you've been running a flag zip-tied to a rocket launcher or bouncing around in a loose holder, this is the upgrade that finally makes the stern look finished.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eCarbon fiber construction: light and fully corrosion-proof, so salt, spray, and UV won't eat at it the way they do aluminum\u003c\/li\u003e\n  \u003cli\u003eJ-Lock locking mechanism: twist-locks into the holder so the pole won't rattle, spin, or lift out underway\u003c\/li\u003e\n  \u003cli\u003eFits any standard 1-5\/8 inch rod holder or gunwale mount: no drilling and no new hardware if you already run holders\u003c\/li\u003e\n  \u003cli\u003eFixed 26.4 inch height: tall enough to fly a flag clear of the cockpit, short enough to handle and stow easily\u003c\/li\u003e\n  \u003cli\u003ePrecision tapered wedges: take up the slack in worn holders for a snug, rattle-free seat at speed\u003c\/li\u003e\n  \u003cli\u003eQuick-release design: drops in and locks in seconds, pulls out just as fast for stowing between trips\u003c\/li\u003e\n  \u003cli\u003eSold without a flag: pair it with a release flag, courtesy flag, dive flag, or ensign to suit the day\u003c\/li\u003e\n  \u003cli\u003eMoves anywhere a holder lives: run it on the transom, gunwale, or amidships without permanent hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized TACO Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat does this flag pole mount into?\u003c\/summary\u003e\n    \u003cp\u003eIt fits any standard 1-5\/8 inch rod holder or gunwale mount. If you already have holders on your transom or gunwales, it drops right in with no extra hardware.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs a flag included?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is the pole on its own, sold without a flag, so you can run whatever flag your day calls for, whether that's a release flag, courtesy flag, dive flag, or ensign.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it come with a storage bag?\u003c\/summary\u003e\n    \u003cp\u003eNo, there's no storage bag in the box. If you stow it in a rod locker with other gear, give it its own slot or wrap it to keep the carbon finish looking sharp.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow tall is the pole?\u003c\/summary\u003e\n    \u003cp\u003eIt's a fixed 26.4 inch height. Measure your setup first and make sure that clears any hardtop, arch, or T-top edge you'll be near.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the height adjustable?\u003c\/summary\u003e\n    \u003cp\u003eNo, this is a fixed-height pole, not a telescoping one. The 26.4 inch height is set.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is it made of?\u003c\/summary\u003e\n    \u003cp\u003eCarbon fiber. It's light, it won't corrode, and it holds up to salt spray and UV better than aluminum or stainless over the long haul.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the J-Lock?\u003c\/summary\u003e\n    \u003cp\u003eIt's the locking mechanism at the base. You slide the pole into the holder, give it a turn, and it locks in place so it won't rattle, spin, or lift out while you're running.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it rattle in my rod holder?\u003c\/summary\u003e\n    \u003cp\u003eIt shouldn't. Between the J-Lock and the precision tapered wedges that take up slack in the holder, it seats snug and stays quiet even at speed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need to drill any holes to install it?\u003c\/summary\u003e\n    \u003cp\u003eNot if you already have a standard 1-5\/8 inch rod holder or gunwale mount. It drops straight in. On lighter hulls it's worth adding a backing plate under the holder to spread the load.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I move it between different holders on the boat?\u003c\/summary\u003e\n    \u003cp\u003eYes. Because it uses a standard rod holder footprint, you can run it on the transom one day and amidships the next with no permanent hardware.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eTACO Marine 26.4 Inch Carbon Fiber Flag Pole with J-Lock\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTACO Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eFP-0125-CF24\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e631437094333\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon Fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight\u003c\/th\u003e\n\u003ctd\u003e26.4 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHeight Type\u003c\/th\u003e\n\u003ctd\u003eFixed\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eGunwale Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eRod Holder Compatibility\u003c\/th\u003e\n\u003ctd\u003eFits Standard 1-5\/8 Inch Rod Holder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eLocking System\u003c\/th\u003e\n\u003ctd\u003eJ-Lock\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFit System\u003c\/th\u003e\n\u003ctd\u003ePrecision Tapered Wedges\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFlag Included\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eStorage Bag Included\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What does this flag pole mount into?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It fits any standard 1-5\/8 inch rod holder or gunwale mount. If you already have holders on your transom or gunwales, it drops right in with no extra hardware.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is a flag included?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This is the pole on its own, sold without a flag, so you can run whatever flag your day calls for, whether that's a release flag, courtesy flag, dive flag, or ensign.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a storage bag?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, there's no storage bag in the box. If you stow it in a rod locker with other gear, give it its own slot or wrap it to keep the carbon finish looking sharp.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How tall is the pole?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a fixed 26.4 inch height. Measure your setup first and make sure that clears any hardtop, arch, or T-top edge you'll be near.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the height adjustable?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No, this is a fixed-height pole, not a telescoping one. The 26.4 inch height is set.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is it made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Carbon fiber. It's light, it won't corrode, and it holds up to salt spray and UV better than aluminum or stainless over the long haul.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the J-Lock?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the locking mechanism at the base. You slide the pole into the holder, give it a turn, and it locks in place so it won't rattle, spin, or lift out while you're running.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it rattle in my rod holder?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It shouldn't. Between the J-Lock and the precision tapered wedges that take up slack in the holder, it seats snug and stays quiet even at speed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need to drill any holes to install it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Not if you already have a standard 1-5\/8 inch rod holder or gunwale mount. It drops straight in. On lighter hulls it's worth adding a backing plate under the holder to spread the load.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I move it between different holders on the boat?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. Because it uses a standard rod holder footprint, you can run it on the transom one day and amidships the next with no permanent hardware.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":45000335720541,"sku":"2007860","price":206.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/113802XL.jpg?v=1788736891","url":"https:\/\/nvnmarine.com\/products\/taco-marine-carbon-fiber-flag-pole-with-j-lock","provider":"NVN Marine","version":"1.0","type":"link"}