{"product_id":"springfield-regatta-fixed-pedestal-4-1-2-in-polished","title":"Springfield Regatta Fixed Pedestal 4-1\/2 in Polished","description":"\u003cp class=\"nvn-hero\"\u003eNeed a low, rock-solid seat mount? The Springfield Regatta fixed height pedestal stands 4-1\/2 inches tall in polished aluminum, built around the common 2-7\/8 inch post. It's the short, no-nonsense mount for bass boats, jon boats, and any spot where you want to sit close to the deck. ABYC H-31 rated.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Springfield Regatta fixed height pedestal is the short, heavy-duty seat mount for anyone who wants to sit low and stay planted. It stands 4-1\/2 inches tall and runs on the industry-standard 2-7\/8 inch post, so it drops into the seat bases and spider mounts most small boats already use. No adjustment, no play, just a fixed post that puts your seat right where you set it.\u003c\/p\u003e\n\u003cp\u003eWhy go short? Because on a lot of boats, lower is better. Think bass boats running rough water, jon boats where a tall pedestal would have you swaying, or a casting deck where you want your center of gravity down low for stability. At 4-1\/2 inches, this post keeps you close to the deck and out of the wind. It's a favorite for fixed seating positions where you don't need the seat to spin up and down all day.\u003c\/p\u003e\n\u003cp\u003eThe whole post is aluminum with a polished finish, so it shrugs off salt spray and won't rust out the way a plated steel post can. Polished aluminum also just looks sharp against a fiberglass deck or an aluminum hull. Springfield has been building marine seating hardware for decades, and the Regatta line is their heavy-duty series, made to take a grown adult dropping into the seat without flexing or wallowing out.\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward. The 2-7\/8 inch diameter is the common plug-in size, so this post seats into a matching base and locks the seat spider on top. If you're replacing an old, corroded post, measure your existing base first to confirm you're running the 2-7\/8 inch standard and not the smaller 2-3\/8 inch size. Get that right and it's a five-minute swap.\u003c\/p\u003e\n\u003cp\u003eThis pedestal carries ABYC Code H-31 B, so it meets the recognized marine standard for boat seating hardware. That matters if you care about doing the job to spec, and honestly, you should. A seat mount is one of those parts you don't think about until it lets go. Build it right the first time and you'll forget it's even there.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003e4-1\/2 inch post height keeps you low and stable, ideal for bass boats and casting decks\u003c\/li\u003e\n  \u003cli\u003e2-7\/8 inch post diameter fits the common plug-in seat base standard\u003c\/li\u003e\n  \u003cli\u003ePolished aluminum construction resists salt corrosion and won't rust like plated steel\u003c\/li\u003e\n  \u003cli\u003eFixed height design gives you a solid, no-play seat mount with nothing to wear out\u003c\/li\u003e\n  \u003cli\u003eABYC Code H-31 B rated to the recognized marine seating standard\u003c\/li\u003e\n  \u003cli\u003eSpringfield Regatta heavy-duty series, built for full-size adult seating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Springfield Marine reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat post diameter does this pedestal use?\u003c\/summary\u003e\n    \u003cp\u003eIt uses the 2-7\/8 inch post, the common plug-in standard. It fits matching bases and seat spiders built for that size.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow tall is the pedestal?\u003c\/summary\u003e\n    \u003cp\u003eThe post height is 4-1\/2 inches. It's a short, fixed mount for low seating positions close to the deck.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs the height adjustable?\u003c\/summary\u003e\n    \u003cp\u003eNo. This is a fixed height post. The seat sits at a set 4-1\/2 inch height with no adjustment or spin-up mechanism.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is it made of?\u003c\/summary\u003e\n    \u003cp\u003eThe post is aluminum with a polished finish, so it stands up to salt spray and won't rust out the way a plated steel post can.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it fit my existing seat base?\u003c\/summary\u003e\n    \u003cp\u003eIf your base is built for the 2-7\/8 inch post standard, yes. Measure your base diameter before ordering so you don't end up with the smaller 2-3\/8 inch size by mistake.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it meet marine standards?\u003c\/summary\u003e\n    \u003cp\u003eYes. It carries ABYC Code H-31 B, the recognized standard for boat seating hardware.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eFixed Height Pedestal; 4-1\/2 Inch Post Height; 2-7\/8 Inch Post Diameter; Polished; Aluminum; ABYC Code H-31 B\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSpringfield Marine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e1280104-MPL\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e038132948846\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSeries\u003c\/th\u003e\n\u003ctd\u003eRegatta\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMount Type\u003c\/th\u003e\n\u003ctd\u003eFixed Height\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePost Height\u003c\/th\u003e\n\u003ctd\u003e4-1\/2 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePost Diameter\u003c\/th\u003e\n\u003ctd\u003e2-7\/8 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePolished\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eABYC Code\u003c\/th\u003e\n\u003ctd\u003eH-31 B\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What post diameter does this pedestal use?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It uses the 2-7\/8 inch post, the common plug-in standard. It fits matching bases and seat spiders built for that size.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How tall is the pedestal?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The post height is 4-1\/2 inches. It's a short, fixed mount for low seating positions close to the deck.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is the height adjustable?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"No. This is a fixed height post. The seat sits at a set 4-1\/2 inch height with no adjustment or spin-up mechanism.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is it made of?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The post is aluminum with a polished finish, so it stands up to salt spray and won't rust out the way a plated steel post can.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it fit my existing seat base?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"If your base is built for the 2-7\/8 inch post standard, yes. Measure your base diameter before ordering so you don't end up with the smaller 2-3\/8 inch size by mistake.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it meet marine standards?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. It carries ABYC Code H-31 B, the recognized standard for boat seating hardware.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Springfield Marine","offers":[{"title":"Default Title","offer_id":45062997049437,"sku":"2008678","price":83.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_d11cdb9c-79d6-4670-9055-e813ed40b23b.jpg?v=1789579860","url":"https:\/\/nvnmarine.com\/products\/springfield-regatta-fixed-pedestal-4-1-2-in-polished","provider":"NVN Marine","version":"1.0","type":"link"}