{"product_id":"simrad-b75h-high-chirp-thru-hull-transducer","title":"Simrad B75H High CHIRP Thru-Hull Transducer 9-Pin","description":"\u003cp class=\"nvn-hero\"\u003eThe Simrad B75H is a bronze thru-hull high CHIRP transducer with a 9-pin xSonic connector. It sweeps 130 to 210 kHz for razor-sharp target separation and detail, reads to 214 meters, and includes a fast-response temperature sensor plus a 10-meter cable.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Simrad B75H is a bronze thru-hull transducer built for anglers who want the sharpest possible sonar detail out of their high-band CHIRP. Rather than pinging at one fixed frequency, the B75H sweeps a continuous band from 130 to 210 kHz. That swept high-frequency signal is what makes the picture so crisp. You get outstanding target separation, so individual fish holding tight to each other or to structure show up as distinct marks, and you get finely detailed bottom returns. For fishing structure, reading fish near cover, and picking bait apart from gamefish, the high band is where the detail lives.\u003c\/p\u003e\n\u003cp\u003eThe B75H is a high-frequency unit, and that shapes what it does best. It reads down to about 214 meters, roughly 700 feet, which covers most inshore and coastal fishing with room to spare. Where it really shines is in the clarity of what it shows in that range. The tradeoff between high and medium CHIRP is straightforward. High CHIRP like the B75H favors fine detail and tight target separation in shallower to mid depths, while a medium-band transducer trades some of that detail for more depth penetration. If your fishing lives on structure and in the water column rather than in the deep offshore canyons, the B75H is the transducer that matches the job.\u003c\/p\u003e\n\u003cp\u003eThis is a thru-hull design with a bronze housing, made to install through a fiberglass or wood hull. Putting the transducer element in direct contact with the water gives the cleanest acoustic path and the strongest signal, which pays off in performance at speed and in the fidelity of the returns. The 12 degree tilted-element version is matched to hulls in roughly the 8 to 15 degree deadrise range, so the beam fires straight down even though the housing sits at the hull's angle. It handles up to 600 watts, enough to drive the high CHIRP band hard and hold a clean bottom lock. A 10 meter cable gives you plenty of length to route from the hull up to the helm on most boats.\u003c\/p\u003e\n\u003cp\u003eThe beam works across roughly a 15 to 9 degree cone as it sweeps the band. That's a tighter, more focused cone than a medium transducer, and that focus is exactly what delivers the sharp target separation the high band is known for. A narrower, harder-hitting beam resolves closely spaced targets that a wider beam would smear together. Built into the transducer is a fast-response water temperature sensor, so your display shows surface temperature without a separate sender. Temperature breaks often mark where fish stage, so having that reading built into the transducer saves an install and puts useful data on your screen automatically.\u003c\/p\u003e\n\u003cp\u003eConnection is through the 9-pin xSonic connector, which plugs into compatible Simrad multifunction displays and sonar modules with a CHIRP-capable sonar port. That standardized connector keeps wiring clean and makes it simple to pair the transducer with the right display at your helm. If you're upgrading from an older single-frequency transducer, the jump to high CHIRP is one of the most noticeable improvements you can make to a fishfinding setup, because the transducer is where the sonar image is born.\u003c\/p\u003e\n\u003cp\u003eA thru-hull transducer rewards a careful install. The location has to see clean, undisturbed water, the bronze housing has to be bedded and sealed properly, and the tilt has to suit your hull's deadrise so the beam fires true. It's worth taking the time to get right, and once it's in you'll have a transducer that performs for years. If you're not sure the B75H suits your hull deadrise and your display, get in touch before you order and we'll help you confirm the match for your boat.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eHigh CHIRP thru-hull transducer that sweeps 130 to 210 kHz for razor-sharp detail and target separation\u003c\/li\u003e\n  \u003cli\u003eReads depth to about 214 meters (roughly 700 feet) for inshore and coastal fishing\u003c\/li\u003e\n  \u003cli\u003eBronze housing designed for fiberglass or wood hulls\u003c\/li\u003e\n  \u003cli\u003e12 degree tilted element matched to hulls with roughly 8 to 15 degree deadrise\u003c\/li\u003e\n  \u003cli\u003eHandles up to 600 watts of power\u003c\/li\u003e\n  \u003cli\u003eTighter 15 to 9 degree beam cone for focused, high-resolution returns\u003c\/li\u003e\n  \u003cli\u003eBuilt-in fast-response water temperature sensor, no separate sender needed\u003c\/li\u003e\n  \u003cli\u003e9-pin xSonic connector for compatible Simrad displays and sonar modules\u003c\/li\u003e\n  \u003cli\u003e10 meter cable for routing from the hull to the helm\u003c\/li\u003e\n  \u003cli\u003eHigh band favors fine detail and target separation over deep-water reach\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Simrad reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the difference between high and medium CHIRP for this transducer?\u003c\/summary\u003e\n    \u003cp\u003eThe B75H is a high CHIRP unit that sweeps 130 to 210 kHz. High CHIRP favors fine detail and tight target separation in shallower to mid depths, so individual fish and structure show up crisply. A medium CHIRP transducer trades some of that detail for more depth penetration, making it better for deep offshore work. Choose the B75H if your fishing lives on structure and in the water column.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow deep can the Simrad B75H read?\u003c\/summary\u003e\n    \u003cp\u003eIt reads down to about 214 meters, which is roughly 700 feet, under good conditions. That covers most inshore and coastal fishing with room to spare, and within that range it delivers exceptionally clear, detailed returns.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat frequency does it operate at?\u003c\/summary\u003e\n    \u003cp\u003eIt sweeps a continuous high CHIRP band from 130 to 210 kHz rather than pinging at a single fixed frequency. That swept high-frequency signal is what gives it outstanding target separation and finely detailed bottom and structure returns.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat hull deadrise is the B75H made for?\u003c\/summary\u003e\n    \u003cp\u003eThis is the 12 degree tilted-element version, matched to hulls in roughly the 8 to 15 degree deadrise range so the beam fires straight down even though the bronze housing sits at the hull's angle. Send us your hull deadrise and we'll confirm the fit before you order.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow does it connect to my display?\u003c\/summary\u003e\n    \u003cp\u003eIt uses a 9-pin xSonic connector that plugs into compatible Simrad multifunction displays and sonar modules with a CHIRP-capable sonar port. The standardized connector keeps the install clean and makes matching the transducer to the right display straightforward.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDoes it include a temperature sensor and how long is the cable?\u003c\/summary\u003e\n    \u003cp\u003eYes, a fast-response water temperature sensor is built into the transducer, so your display shows surface water temperature without a separate sender. The transducer comes with a 10 meter cable, which is enough to route from the hull to the helm on most boats.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow much power does it handle?\u003c\/summary\u003e\n    \u003cp\u003eThe B75H handles up to 600 watts, which is enough to drive the high CHIRP band hard and hold a clean bottom lock. Pair it with a CHIRP sonar source rated for that power to get the sharpest picture.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhy choose a thru-hull over a transom-mount transducer?\u003c\/summary\u003e\n    \u003cp\u003eA thru-hull puts the transducer element in direct contact with the water for the cleanest acoustic path, which delivers the strongest signal and the best fidelity, especially at speed. It's a more involved install than a transom mount, but for serious fishfinding the clarity is worth it.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eSimrad B75H High CHIRP Thru-Hull Transducer 9-Pin\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSimrad\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e000-16190-001\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e9420064132164\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eThru-Hull CHIRP Transducer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFrequency Band\u003c\/th\u003e\n\u003ctd\u003eHigh CHIRP, 130 to 210 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMax Depth\u003c\/th\u003e\n\u003ctd\u003e214 m (about 700 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBeam Cone\u003c\/th\u003e\n\u003ctd\u003eApproximately 15 to 9 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePower Handling\u003c\/th\u003e\n\u003ctd\u003e600 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMounting Style\u003c\/th\u003e\n\u003ctd\u003eThru-hull, 12 degree tilted element\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHull Deadrise\u003c\/th\u003e\n\u003ctd\u003eApproximately 8 to 15 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHousing Material\u003c\/th\u003e\n\u003ctd\u003eBronze\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHull Compatibility\u003c\/th\u003e\n\u003ctd\u003eFiberglass or wood\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003e9-pin xSonic\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCable Length\u003c\/th\u003e\n\u003ctd\u003e10 m (about 33 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTemperature Sensor\u003c\/th\u003e\n\u003ctd\u003eBuilt-in, fast-response\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the difference between high and medium CHIRP for this transducer?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The B75H is a high CHIRP unit that sweeps 130 to 210 kHz. High CHIRP favors fine detail and tight target separation in shallower to mid depths, so individual fish and structure show up crisply. A medium CHIRP transducer trades some of that detail for more depth penetration, making it better for deep offshore work. Choose the B75H if your fishing lives on structure and in the water column.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How deep can the Simrad B75H read?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It reads down to about 214 meters, which is roughly 700 feet, under good conditions. That covers most inshore and coastal fishing with room to spare, and within that range it delivers exceptionally clear, detailed returns.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What frequency does it operate at?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It sweeps a continuous high CHIRP band from 130 to 210 kHz rather than pinging at a single fixed frequency. That swept high-frequency signal is what gives it outstanding target separation and finely detailed bottom and structure returns.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What hull deadrise is the B75H made for?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"This is the 12 degree tilted-element version, matched to hulls in roughly the 8 to 15 degree deadrise range so the beam fires straight down even though the bronze housing sits at the hull's angle. Send us your hull deadrise and we'll confirm the fit before you order.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How does it connect to my display?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It uses a 9-pin xSonic connector that plugs into compatible Simrad multifunction displays and sonar modules with a CHIRP-capable sonar port. The standardized connector keeps the install clean and makes matching the transducer to the right display straightforward.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Does it include a temperature sensor and how long is the cable?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, a fast-response water temperature sensor is built into the transducer, so your display shows surface water temperature without a separate sender. The transducer comes with a 10 meter cable, which is enough to route from the hull to the helm on most boats.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How much power does it handle?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The B75H handles up to 600 watts, which is enough to drive the high CHIRP band hard and hold a clean bottom lock. Pair it with a CHIRP sonar source rated for that power to get the sharpest picture.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Why choose a thru-hull over a transom-mount transducer?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A thru-hull puts the transducer element in direct contact with the water for the cleanest acoustic path, which delivers the strongest signal and the best fidelity, especially at speed. It's a more involved install than a transom mount, but for serious fishfinding the clarity is worth it.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Simrad","offers":[{"title":"Default Title","offer_id":44782640136285,"sku":"2006783","price":894.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_f91b81e7-1f3a-490c-88f7-ff0bedb980bb.png?v=1784854687","url":"https:\/\/nvnmarine.com\/products\/simrad-b75h-high-chirp-thru-hull-transducer","provider":"NVN Marine","version":"1.0","type":"link"}