Shurtape FLS 325 Fine Line Masking Tape 0.70 in x 36 yd
Shurtape FLS 325 Fine Line Masking Tape 0.70 in x 36 yd — Product description
Shurtape FLS 325 is a performance-grade fine line masking tape built for sharp, clean paint edges. The yellow PVC film backing conforms to curves, and the rubber adhesive holds tight during gel coat and coating work, then pulls off without leaving a mess. One roll, 0.70 inch wide by 36 yards.
If you've ever pulled tape and found a fuzzy, bled-out paint line underneath, you know why fine line tape matters. Shurtape FLS 325 is built for exactly that job. The thin PVC film backing lays down a crisp edge and bends around curves, so masking a gel coat stripe or a two-tone hull comes out sharp.
It's a performance-grade tape aimed at metal prep, painting, coating, and gel coat masking in transportation and metal fabrication work. The rubber adhesive grips hard enough to stop paint creep, but it still lifts clean when you're done. That's the balance you want on a real job.
Each roll runs 0.70 inch wide by 36 yards, in a high-visibility yellow that's easy to spot against most surfaces. Good for boat refinishing, trailer touch-ups, and any shop where a clean line is the difference between a pro finish and a redo.
Key Features
- 0.70 inch (18 mm) width by 36 yard length, sized for detailed fine line masking work
- PVC film backing conforms to curves for sharp, bleed-free paint and gel coat edges
- Rubber adhesive holds against paint creep, then removes cleanly without residue
- Performance grade for metal prep, painting, coating, and gel coat masking
- High-visibility yellow makes masked areas easy to spot on the job
Why Buy from NVN Marine
- Authorized Shurtape reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Shurtape FLS 325 Fine Line Masking Tape |
|---|---|
| Brand | Shurtape |
| Manufacturer Part Number | 105691 |
| UPC | 10040074056739 |
| Width | 0.70 inch |
| Length | 36 yard |
| Color | Yellow |
| Backing | PVC Film |
| Adhesive | Rubber Adhesive |
| Grade | Performance Grade |
| Application | Metal Preparation, Painting, Coating, Gel Coat Masking |
Frequently asked questions
What is Shurtape FLS 325 used for?
It's a performance-grade fine line masking tape for metal preparation, painting, coating, and gel coat masking in transportation and metal fabrication work. It's a solid pick for boat and trailer refinishing where you need a clean paint edge.
How wide and long is each roll?
Each roll is 0.70 inch (about 18 mm) wide and 36 yards long.
Will it leave residue when I pull it off?
The rubber adhesive is designed to hold firm during masking and then lift cleanly. Pull it back on itself at a low angle once the coating has set for the best release.
Why use fine line tape instead of standard masking tape?
The thin PVC film backing bends around curves and lays down a sharper edge than a paper masking tape, which keeps paint and gel coat from bleeding under the line.
