Shurtape FLC 280 Fine Line Tape 1/4 in x 36 yd Blue
Shurtape FLC 280 Fine Line Tape 1/4 in x 36 yd Blue — Product description
The Shurtape FLC 280 is a performance-grade fine line masking tape built for crisp, sharp paint edges. This 1/4 inch by 36 yard blue roll uses a PVC film backing and rubber adhesive that handles up to 280F, so it holds through bake cycles and pulls away clean. A go-to for gel coat masking, metal prep, and two-tone work.
If you've ever pulled tape and found a fuzzy, bleeding paint line underneath, you know why fine line tape exists. The Shurtape FLC 280 is built for exactly that job. It's a thin blue PVC film tape, 1/4 inch wide on a 36 yard roll, made to lay down tight curves and leave a sharp, clean edge when you pull it.
The rubber adhesive sticks well and comes off without leaving gummy residue behind. And because the film handles heat up to 280F, it holds through paint bake cycles instead of lifting or scorching. That makes it a solid pick for gel coat masking, two-tone hull work, metal fabrication, and any coating job where the line has to be dead straight.
At 1/4 inch, it's narrow enough to bend around gentle radiuses without wrinkling. Lay your fine line first, then back it with wider masking paper. It's a small roll that earns its keep on every paint project.
Key Features
- 1/4 inch width x 36 yard length blue roll, sized for tight curves and detail lines
- PVC film backing, thin and conformable for a sharp, clean paint edge
- Rubber adhesive holds firm, then removes cleanly without gummy residue
- 280F temperature resistance, holds through paint bake cycles without lifting
- Performance grade for metal prep, painting, coating, and gel coat masking
Why Buy from NVN Marine
- Authorized Shurtape reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Shurtape FLC 280 Fine Line Masking Tape |
|---|---|
| Brand | Shurtape |
| Manufacturer Part Number | 105819 |
| UPC | 040074030091 |
| Width | 1/4 inch |
| Length | 36 yards |
| Color | Blue |
| Adhesive Type | Rubber |
| Backing Material | PVC Film |
| Temperature Resistance | 280F |
| Grade | Performance Grade |
| Roll Count | Single |
| Case Quantity | 12 rolls per case |
Frequently asked questions
What is the Shurtape FLC 280 used for?
It's a fine line masking tape for metal preparation, painting, coating, and gel coat masking. You'll see it in transportation refinishing and metal fabrication shops wherever a crisp, straight paint line matters.
How wide and long is this roll?
This roll is 1/4 inch wide and 36 yards long. The narrow width lets it bend around gentle curves without wrinkling.
Can it handle paint bake temperatures?
Yes. The PVC film is rated to 280F, so it holds through typical paint bake cycles without lifting or scorching.
Will it leave residue when I remove it?
The rubber adhesive is designed to pull away cleanly. Remove it while it's still fresh after painting for the best results and no gummy residue.
