Shurtape FLC 280 Blue Fine Line Tape 6mm x 36yd
Shurtape FLC 280 Blue Fine Line Tape 6mm x 36yd — Product description
The Shurtape FLC 280 is a performance-grade fine line masking tape for clean paint edges. It measures 0.23 inches (6mm) wide by 36 yards, with a thin blue PVC film backing and a rubber adhesive built for metal prep, painting, coating, and gel coat masking.
The Shurtape FLC 280 is a performance-grade fine line masking tape built for clean paint edges. It runs 0.23 inches wide (6mm) and 36 yards long, with a blue PVC film backing and a rubber adhesive that grips without lifting when you pull it. That thin PVC backing is what lets you pull tight curves and sharp lines that a paper tape would fight you on.
We reach for this one during gel coat masking and topside painting, where a crisp boundary matters. It's made for metal preparation, painting, coating, and gel coat work across transportation and metal fabrication jobs, so it holds up around solvents and primer better than a basic crepe tape. Press the edge down firm, shoot your paint, and peel it back while the coating is still fresh for the sharpest line.
One roll per pack. Blue so it's easy to spot against bare metal or a faded hull. If you mask a lot of fine detail on the boat, keep a few on the shelf.
Key Features
- Performance-grade fine line tape for sharp, clean paint edges
- 0.23 in (6mm) wide by 36 yards long, sized for fine detail masking
- Thin blue PVC film backing conforms to curves and tight lines
- Rubber adhesive holds firm through painting, then peels away cleanly
- Made for metal prep, painting, coating, and gel coat masking
Why Buy from NVN Marine
- Authorized Shurtape reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Shurtape FLC 280 Fine Line Masking Tape, Blue, 6mm x 36yd |
|---|---|
| Brand | Shurtape |
| Manufacturer Part Number | 105709 |
| UPC | 10040074057125 |
| Product Line | FLC 280 |
| Width | 0.23 in (6 mm) |
| Length | 36 yd |
| Color | Blue |
| Adhesive | Rubber |
| Backing | PVC Film |
| Grade | Performance Grade |
| Recommended Use | Metal preparation, painting, coating, and gel coat masking |
Frequently asked questions
How wide is the FLC 280 tape?
It's 0.23 inches, which is 6 millimeters, and each roll is 36 yards long.
What is this tape used for?
Metal preparation, painting, coating, and gel coat masking in transportation and metal fabrication work. It's a good fit for fine detail and crisp paint boundaries.
Will it leave residue when I remove it?
The rubber adhesive is made to hold during painting and pull away cleanly. For the sharpest line, peel it back while the coating is still fresh.
How many rolls come in a pack?
This is sold as a single roll.
Why is the backing PVC film instead of paper?
The thin PVC film conforms around curves and holds a straighter edge than paper crepe, which is why it works well for fine line masking.
