{"product_id":"shurhold-833i-replacement-section-for-833-handle","title":"Shurhold 833I Replacement Telescoping Inner Section for 833 Handle","description":"\u003cp class=\"nvn-hero\"\u003eThe Shurhold 833I is the genuine replacement telescoping inner section for the 833 6 foot handle. If the sliding section on your handle has bent, seized, or quit locking, this is the exact part that gets it working again. Black neoprene with a foam insert, made to fit the SHUR-LOK collar.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-description\"\u003e\n\u003cp\u003eThe Shurhold 833 telescoping handle is one of those tools that quietly does a lot of work on a boat. You run it with a deck brush for the topsides, a soft brush for the hull, a squeegee for the glass, whatever the SHUR-LOK head takes that day. And because it telescopes from around 40 inches out to 72 inches, it's the handle you reach for when you need to get up over the cabin top or down to the waterline without leaning out over the rail. The 833I is the genuine replacement inner section for that handle. When the sliding section is the part that gave out, you replace the section, not the whole handle.\u003c\/p\u003e\n\u003cp\u003eWe see this part come up for a couple of reasons. First, the inner section takes the abuse. It's the piece that slides in and out, picks up grit, gets left extended, and eventually stops locking clean. Second, aluminum and salt water don't stay friends forever. A handle that lives in a wet cockpit locker or a dock box tends to corrode at the joints, and the telescoping action is usually the first thing to feel it. Rather than toss a perfectly good outer section, quick-release head, and grip, you swap in the 833I and you're back in business.\u003c\/p\u003e\n\u003cp\u003eThis is the genuine Shurhold part, MPN 833I, finished in black neoprene with a foam insert. It's built to the same fit as the section that came in your original 833, so it slides and locks the way it should. No shimming, no filing, no hoping a generic tube is close enough on diameter. It just fits. Shurhold has built cleaning gear for boaters for decades, and the parts are made to keep working together. Order the section by its part number and you know it's the right one.\u003c\/p\u003e\n\u003cp\u003eThe black neoprene isn't only about looks. It gives you a surface that stays easy on the hands when the aluminum would otherwise be cold in the morning or hot after a day in the sun, and the foam insert adds a little cushion where your hands ride. It's a nice touch on a part that gets gripped, dragged, and knocked around all season. Little things like that are why folks keep going back to Shurhold.\u003c\/p\u003e\n\u003cp\u003eSwapping it is a dock-side job, not a workshop project. Back off the telescoping collar on your 833, slide the old inner section out, and slide the 833I in. Snug the collar back down and check that it locks at a couple of different lengths. Take a second to make sure the section is seated square before you tighten. If the neoprene feels tight going on, let it sit in the sun for a few minutes first. Warm neoprene slides a lot easier than cold. That's the whole job.\u003c\/p\u003e\n\u003cp\u003eBecause this is a replacement part, it's meant for anyone who already owns the Shurhold 833 6 foot handle and just needs the sliding section made right again. If you don't have the 833 yet, you want the complete handle rather than this section on its own. And if the trouble is the head, the collar, or the grip instead of the inner tube, those are separate parts. Match the fix to what actually failed. When it's the telescoping section, the 833I is the answer.\u003c\/p\u003e\n\u003cp\u003eA little care goes a long way. Rinse the handle with fresh water after a salt-water day, wipe the section down before you collapse it, and try not to store it fully extended under tension. Do that and this section will outlast a few brush heads. It's a small part with a simple job, and going with the genuine one keeps your 833 earning its spot in the locker. There's no reason to retire a good handle over one worn tube.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul class=\"nvn-features\"\u003e\n  \u003cli\u003eGenuine Shurhold 833I replacement telescoping inner section, made to fit the 833 6 foot handle exactly\u003c\/li\u003e\n  \u003cli\u003eBlack neoprene finish for a comfortable grip whether the handle is cold in the morning or hot in the sun\u003c\/li\u003e\n  \u003cli\u003eFoam insert adds a little cushion where your hands ride\u003c\/li\u003e\n  \u003cli\u003eRestores clean slide-and-lock action in the SHUR-LOK telescoping collar\u003c\/li\u003e\n  \u003cli\u003eFits the Shurhold 833 handle's 40 to 72 inch locking range\u003c\/li\u003e\n  \u003cli\u003eDock-side swap, no tools or filing required\u003c\/li\u003e\n  \u003cli\u003eBuilt for marine use, just rinse with fresh water after salt-water days\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"nvn-trust\"\u003e\n  \u003ch2\u003eWhy Buy from NVN Marine\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAuthorized Shurhold reseller, full manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eNMEA member and ABYC certified, advice from real boat techs\u003c\/li\u003e\n    \u003cli\u003eSame-day shipping before 3 PM ET on in-stock items\u003c\/li\u003e\n    \u003cli\u003eNY headquarters and Fort Lauderdale flagship retail store\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat exactly is the Shurhold 833I?\u003c\/summary\u003e\n    \u003cp\u003eIt's the genuine replacement telescoping inner section for the Shurhold 833 6 foot telescoping extension handle. It's the sliding tube that extends and locks inside the handle, finished in black neoprene with a foam insert.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWill it fit my Shurhold 833 handle?\u003c\/summary\u003e\n    \u003cp\u003eYes. The 833I is made specifically for the 833 6 foot telescoping extension handle, so it slides and locks in the SHUR-LOK collar the way the original section did. No filing or shimming needed.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat's the part number and UPC?\u003c\/summary\u003e\n    \u003cp\u003eThe manufacturer part number is 833I and the UPC is 703485808337. If you order by the 833I part number you'll get the correct section.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat color and material is it?\u003c\/summary\u003e\n    \u003cp\u003eIt's black, finished in neoprene, and it includes a foam insert for a bit of cushion and hand comfort.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need to replace the whole 833 handle?\u003c\/summary\u003e\n    \u003cp\u003eNot if the inner telescoping section is what failed. The 833I lets you swap just the sliding section and keep your existing outer section, quick-release head, and grip.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eIs this a genuine Shurhold part?\u003c\/summary\u003e\n    \u003cp\u003eYes. We're an authorized Shurhold reseller, so this is the real 833I replacement section, not a generic substitute.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow long is the 833 handle this fits?\u003c\/summary\u003e\n    \u003cp\u003eThe 833 is a 6 foot handle, roughly 183 cm, that telescopes and locks between about 40 and 72 inches. The 833I is the inner section that gives it that range.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow hard is it to install?\u003c\/summary\u003e\n    \u003cp\u003eIt's a dock-side job. Loosen the telescoping collar, slide the old section out, slide the 833I in, and snug the collar back down. If the neoprene is tight going on, warm it in the sun first so it slides easier.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable class=\"nvn-specs\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eTitle\u003c\/th\u003e\n\u003ctd\u003eShurhold 833I Replacement Telescoping Inner Section\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eShurhold\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e833I\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e703485808337\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eNeoprene\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eFoam Insert\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eReplacement Telescoping Inner Section\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eCompatible Handle\u003c\/th\u003e\n\u003ctd\u003eShurhold 833 6' Telescoping Extension Handle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHandle Length\u003c\/th\u003e\n\u003ctd\u003e6 ft (183 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eHandle Locking Range\u003c\/th\u003e\n\u003ctd\u003e40 in to 72 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eQuick-Release System\u003c\/th\u003e\n\u003ctd\u003eSHUR-LOK\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eKeystone Part Number\u003c\/th\u003e\n\u003ctd\u003eSHU833I\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What exactly is the Shurhold 833I?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's the genuine replacement telescoping inner section for the Shurhold 833 6 foot telescoping extension handle. It's the sliding tube that extends and locks inside the handle, finished in black neoprene with a foam insert.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Will it fit my Shurhold 833 handle?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. The 833I is made specifically for the 833 6 foot telescoping extension handle, so it slides and locks in the SHUR-LOK collar the way the original section did. No filing or shimming needed.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What's the part number and UPC?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The manufacturer part number is 833I and the UPC is 703485808337. If you order by the 833I part number you'll get the correct section.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What color and material is it?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's black, finished in neoprene, and it includes a foam insert for a bit of cushion and hand comfort.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need to replace the whole 833 handle?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Not if the inner telescoping section is what failed. The 833I lets you swap just the sliding section and keep your existing outer section, quick-release head, and grip.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Is this a genuine Shurhold part?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes. We're an authorized Shurhold reseller, so this is the real 833I replacement section, not a generic substitute.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How long is the 833 handle this fits?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The 833 is a 6 foot handle, roughly 183 cm, that telescopes and locks between about 40 and 72 inches. The 833I is the inner section that gives it that range.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How hard is it to install?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It's a dock-side job. Loosen the telescoping collar, slide the old section out, slide the 833I in, and snug the collar back down. If the neoprene is tight going on, warm it in the sun first so it slides easier.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","brand":"Shurhold","offers":[{"title":"Default Title","offer_id":45051484045405,"sku":"2008929","price":26.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/files\/ImageServerAPI_be9b5f6d-f064-4032-aa74-9a5a2ea5e611.jpg?v=1789392569","url":"https:\/\/nvnmarine.com\/products\/shurhold-833i-replacement-section-for-833-handle","provider":"NVN Marine","version":"1.0","type":"link"}